Assessments - 3, GPA: 3.7
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
Rotate the rotary multi selector, or press H or I to edit the highlighted item. Press K to move the highlight in the following order. D (day) . M (month) . Y (year) . hour . minute . DMY (the order in which the day, month, and year are displayed) Press J to return to the previous item. First Steps DateDMY01 010000Edit201 001 6 Choose the order in which the day, month, and year are displayed and press the k button or press K. The settings are applied and monitor display exits to shooting mode. DateM051 51 01 5DY201 0Edit D Changing and Imprinting the Date and Time • Select Date from the Date item (A 124) in the setup menu (A 120) to change the current date and time and follow the procedure described from step 5. • Select Time zone from the Date item in the setup menu to change the time zone and daylight saving time settings (A 124). • To imprint the date on pictures, enable date imprint from the Date imprint option (A 128) in the setup menu after the date and time have been set. 19 Inserting Memory Cards Image, sound, and movie files are stored in the camera’s internal memory (approximately 32 MB) or on removable Secure Digital (SD) memory cards (available commercially; A145). If a memory card is inserted in the camera, data are automatically stored on the memory card and data recorded to the memory card can be played back, deleted, or transferred. Remove the memory card to store data in the internal memory, or play back, delete, or transfer data from the internal memory. 1 Be sure that the power-on lamp and the monitor are off and open the batterychamber/ memory card slot cover. Be sure to turn off the camera before opening the battery-chamber/memory card slot cover. 2 Insert the memory card. Slide the memory card in the correct orientation shown at right until it clicks into place. Close the battery-chamber/memory card slot cover. B Inserting Memory Cards Inserting the memory card upside down or backwards could damage the camera or the memory card. Be sure to check that the memory card is in the correct orientation. Removing Memory Cards Before removing memory cards, turn the camera off and confirm that the power-on lamp and monitor are off. Open the battery-chamber/memory card slot cover and press the card in (1) to partially eject the card. The card can then be removed by hand. Do not attempt to remove the card at an angle (2). First Steps 20 Inserting Memory Cards B Formatting Memory Cards If the message at right is displayed when the camera is turned on, First Steps • Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting Cardisnotformatted. Formatcard? YesNo the memory card must be formatted before use (A 134). Note that formatting permanently deletes all pictures and other data on the memory card. Be sure to make copies of any pictures you wish to keep before formatting the memory card. When formatting the memory card, use the rotary multi selector to choose Yes and press the k button. The confirmation dialog will be displayed. To start formatting, choose Format and press the k button. is complete. • Be sure to use this camera to format memory cards previously used in other devices the first time they are inserted into the COOLPIX S6000 (A 134). B The Write Protect Switch Memory cards are equipped with a write protect switch. When Write protect switch this switch is in the “lock” position, data cannot be written to, or deleted from, the memory card. If the switch is in the “lock” position, unlock it by sliding the switch to the “write” position to record or delete pictures, or to format the memory card. B Memory Cards • Use only Secure Digital memory cards. • Do not perform the following during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the camera or memory card: -Take out the battery or memory card -Turn off the camera -Disconnect the AC adapter • Do not format the memory card using a computer. • Do not disassemble or modify. • Do not drop, bend, or expose to water or strong physical shock. • Do not touch the metal terminals with your fingers or metal objects. • Do not affix labels or stickers to the memory card. • Do not leave in direct sunlight, closed vehicles, or areas exposed to high temperatures. • Do not expose to humidity, dust, or corrosive gases. 21 Basic Photography and Playback: A(Auto) Mode Step 1 Turn the Camera On and Select A(Auto) Mode Basic Photography and Playback: A(Auto) Mode Step 1 Turn the Camera On and Select A(Auto) Mode This section describes taking pictures in A(auto) mode, an automatic, “point-andshoot” mode recommended for first-time users of digital cameras. 1 Press the power switch to turn on the camera. The power-on lamp (green) will light for a moment and the monitor will turn on. The lens will also extend. Proceed to step 4 when Ais displayed. Basic Photography and Playback...