Assessments - , GPA:
(
)
)
Fabricante : Nikon
Arquivo Tamanho: 4.57 mb
Arquivo Nome :
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
por este dispositivo também tem outras instruções :
Facilidade de uso
2 Frame the picture. Position the main subject near the center of the monitor. 161616 Using the Zoom Use the zoom buttons to activate optical zoom. Press f (h) to zoom out, increasing the area visible in the frame, or g (i) to zoom in so that the subject fills a larger area of the frame. Zoom out Zoom in Press the zoom button and a monitor indicator will show the current zoom ratio. Optical Digital zoom zoom Basic Photography and Playback: Auto Mode 22 Step 2 Frame a Picture Digital Zoom When the camera is zoomed in to the maximum magnification (4.), holding down g (i) triggers digital zoom. The subject is magnified up to 4., for a total magnification of 16.. Basic Photography and Playback: Auto Mode The focus area will not be displayed and focus will be on the center of the screen when digital zoom is in effect. Optical zoom Digital zoom is in effect. (up to 4.). If the crop would be smaller than the current image size, additional pixels are added through a process known as interpolation, creating a slightly “grainy” image. Interpolation will not be applied before the position of the V on the screen; the zoom indicator changes to yellow when interpolation is in effect. B Maximum zoom ratio without interpolation If possible, digital zoom will create a picture by cropping the area visible in the monitor to the current Image mode (A 76), increasing magnification without affecting quality, and changing the position of V. The amount of zoom available before interpolation is used depends on the option currently selected for image size, as shown in the following table. The camera pauses temporarily in its zooming operation when it reaches the maximum zoom ratio possible before interpolation is used, during which the zoom indicator changes from white to yellow. Image Mode Zoom rate , ,hiK 4. (maximum optical zoom) L 5.6. (1.4 digital zoom) Image Mode Zoom rate M 6.4. (1.6 digital zoom) N 13.6. (3.4 digital zoom) O 16. (4 digital zoom) Digital zoom can be turned off (A 104) 23 Step 3 Focus and Shoot 1 Press the shutter-release button halfway. Camera automatically selects the focus area (one of nine) containing the subject closest to the camera. When the subject is in focus, the active focus area glows green. F2.7F2.71/601/601/60 F2.7 Shutter Aperture Speed When digital zoom is in effect, the focus area will not be displayed and the camera will focus on the subject in the center focus area. The focus indicator will glow green and the focus area will not be displayed. Press the shutter-release button halfway to display the shutter speed and aperture. Focus and exposure remains locked while the shutter-release button is pressed halfway. When the camera is unable to focus while the shutter-release button is pressed halfway, the focus area or focus display will blink red. Change the composition and try again. 2 Press the shutter-release button the rest of the way down. The picture will be recorded to the memory card or internal memory. Basic Photography and Playback: Auto Mode 24 Step 3 Focus and Shoot C During Recording While pictures are being recorded, the O(wait) icon will be displayed and the number of exposures remaining display or the movie length display will blink. Do not turn the camera off, open the battery-chamber/memory card slot cover, or remove or disconnect the power source while these icons are displayed. Cutting power or removing the memory card in these circumstances could result in loss of data or in damage to the camera or card. C Autofocus Autofocus may not perform as expected in the following situations. In some rare cases, the subject may not be in focus despite the fact that the active focus area or the focus indicator glow green: • Subject is very dark • Objects of sharply differing brightness are included in the scene (e.g. the sun is behind the subject and is in deep shadow) • No contrast between the subject and surroundings (e.g. when the subject is standing in front of a white wall, wearing a white shirt) • Several objects are at different distances from the camera (e.g. the subject is inside a cage) • Subject is moving rapidly In the situations noted above, try pressing the shutter-release button halfway to refocus several times, or focus on another subject and use focus lock (A 85). When using focus lock, be sure that the distance between the camera and the subject with which focus was locked is the same as that for the actual subject. D Shutter-release Button The camera features a two-stage shutter-release button. To set focus and exposure, press the shutter-release button halfway, stopping when you feel resistance. Focus and exposure lock while the shutter-release button is held in this position. To release the shutter and take a picture, press the shutter-release button the rest of the way down. Do not use force when pressing the shutter-release button, as this may result in camera shake and blurred pictures. Press the shutter-Press the shutter- release button release button the halfwa...