Assessments - 4, GPA: 4.8
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
About one third of picture is shown superimposed on view through lens (if pan direction is left to right, picture will appear on left side of monitor). [ [[ 8] 8]8] 42 [ 8][ 8] [ 8][ 8] Take next shot. Repeat End series. steps 6 -7 until all shots • Shooting will also end in series have been tak if changing mode en. using the Mode Dial or entering standby mode. Panorama Assist The pan direction, Flash mode, Self-timer mode, Macro close-up mode, and Exposure compensation can not be changed after the first picture is taken. To change the pan direction, press the Button to end shooting and repeat steps 1 - 3. Full-Screen Playback When you press the Button after starting shooting, Panorama assist mode is terminated and the most recent picture will be displayed in the monitor. Use a Tripod Using a tripod makes it easier to compose overlapping shots. Compose the next shot to overlap with the previous picture. Panorama Assist Folder Each time you take pictures in Panorama assist mode, a “P_xxx” folder (e.g., “101P_001”) is automatically created, and a series of pictures are stored in the folder. 43 Scene Mode More on Photography When Lighting Is Poor: Using the Flash More on Photography When Lighting Is Poor: Using the Flash The following five flash modes are available: Mode How it works When to use it Auto Flash fires when lighting is poor. Best choice in most situations. Auto with red- eye reduction Pre flash is used before the main flash fires to reduce “red-eye.” If “red-eye” is detected after an image is taken, the camera will correct “red-eye” when storing the picture. Use for portraits (works best when subject is well within range of flash and looking at pre-flash). Not recommended when quick shutter response is required. More on Photography Use to capture natural lighting under dim light or where use of flash is pro- Flash will not fire even when Flash Cancel hibited. If (camera shake) icon lighting is poor. (off) appears, care should be taken to avoid blurring. Flash fires whenever picture Use to “fill-in” (illuminate) shadows and Anytime Flash is taken. back-lit subjects. (fill flash) Use to capture both subject and back- Auto flash combined with ground at night or under dim light. Slow sync slow shutter speeds. Care should be taken to avoid blurring. To select the flash mode: Display Flash menu. Flash :Confir :Confir:Confir:Confir:Confir m mm Highlight desired mode and press . Flash mode is displayed in monitor (to exit without changing mode, wait two seconds without pressing Button). :Confir :Confir:Confir:Confir:Confir m mm Flash 44 Flash Range • Flash range varies with zoom position. When the camera is zoomed all the way out, the flash has a range of approx. 0.3 -4.5 m/1' -14'8". When the camera is zoomed all the way in, the flash has a range of approx. 0.3 - 3.5 m/1' -11'5" with Auto in Sensitivity. • The flash may not be able to light the entire subject at distances of less than 30 cm (1'). When taking close-ups, play each picture back after shooting to check the results. Selecting Flash Mode While Displaying Focus Area Selection Guide When AF area mode ( 98) is set to Manual ( 100) and focus area selection guide is displayed in the monitor, press to hide focus area selection guide and select the Flash mode. The (Camera Shake) Icon When lighting is poor and the Flash is off ( ), shutter speeds will slow and pictures may be blurred. If the shutter speed required for exposure is very slow, a (camera shake) warning will appear in the monitor. Use of a tripod or support is recommended. [ 8][ 8][ 8] Using the Built-In Speedlight Light from the flash reflected from particles of dust or other matter in the air may appear in pictures as bright specks. If this occurs, turn the Flash off or zoom in and try again. Flash Mode Selection Flash mode is not available in the following cases: • Continuous is set to Continuous, 5 shot buffer or Multi-shot 16. • BSS is set to On. • Auto bracketing is set to On. • Taking a picture in some assist modes ( 30 -35) or scene modes ( 36 -41). Red-Eye Reduction The “Red-eye reduction” flash function of the E7900/E5900 uses an advanced red-eye reduction method. Several pre-flashes are fired before the main flash fires to reduce “red-eye.” In addition to this function, if “red-eye” is detected the camera will automatically correct it when storing the picture (“In-Camera Red-Eye Fix”). Using this function there is slight delay before you can press the shutter release again for the next shot. Depending on the situation, red-eye reduction may not always produce the desired results. In some rare cases, other picture areas may be affected as well as the “redeye” area. In this case, choose another flash mode and try again. More on Photography 45 Taking a Self-Portrait: Using the Self-Timer Taking a Self-Portrait: Using the Self-Timer When the self-timer is on, pictures are taken ten or three seconds after the Shutter-release Button is pressed. This can be used to allow you to appear ...
Este manual também é adequado para os modelos :Câmaras - COOLPIX 5900 (4.91 mb)