Log:
Assessments - 0, GPA: 0 ( )

Instruções de Operação Olympus, Modelo FE-115

Fabricante : Olympus
Arquivo Tamanho: 5.67 mb
Arquivo Nome :
Língua de Ensino: en
Fotos e especificações  Olympus  FE-115
Ir para baixar



por este dispositivo também tem outras instruções :
Câmaras - FE-115 (2.98 mb)es
Câmaras - FE-115 (2.99 mb)de
Câmaras - FE-115 (3.07 mb)ru
Câmaras - FE-115 (2.56 mb)hu

Facilidade de uso


CARD-COVER OPEN The battery compartment/card cover is open. Close the battery compartment/card cover. The card is not formatted. Format the card. All data on the card will be deleted. 8 Appendix 89 Troubleshooting Troubleshooting (Preparatory operations Possible cause Corrective action Ref. page The camera does not turn on or function buttons do not respond. The power is off. Press the power switch to turn the camera on. P. 8 The batteries are loaded incorrectly. Reload the batteries correctly. – The batteries are exhausted. Replace the batteries with new ones, or charge the batteries. – The batteries are temporarily unable to function because of the cold. Warm the batteries by putting them in your pocket for a while. – The camera is in the sleep mode. Operate the camera with the shutter button, l, or k. P. 55 There is condensation* inside the camera. Wait until the camera dries before turning it on again. – The camera is connected to a computer. The camera will not operate while it is connected to a computer. – (Shooting 8 Appendix Possible cause Corrective action Ref. page No picture is taken when the shutter button is pressed. The batteries are exhausted. Replace the batteries with new ones, or charge the batteries. – The camera is in the playback mode. Press l or the shutter button to switch to the shooting mode. P. 9 The power is off. Press the power switch to turn on the camera. P. 8 The flash has not finished charging. Remove your finger from the shutter button, and wait until the # (flash charge) indication stops blinking before taking the picture. P. 33 The internal memory or card is full. Erase unwanted pictures or insert a new card. Before erasing, download important images to a computer. P. 47 90 Troubleshooting The batteries ran out of power during shooting or while the images were being written to the internal memory or card. (Monitor turns off.) There is a problem with the card. Possible cause Replace the batteries with new ones, or charge the batteries. (Wait until the orange lamp turns off when blinking.) See “Error codes”. Corrective action – P. 89 Ref. page Vertical lines appear on the monitor screen during shooting. The monitor is hard to see. The monitor is exposed to direct sunlight. Block the sunlight with your hand. The date recorded with the image data is wrong. Aiming the camera at a bright subject in sunlight may cause vertical lines to appear on the screen. This is not a malfunction. – – The camera has been left with the batteries removed. The date/time is not set. If the camera is left for 1 day with the batteries removed, the date/time setting is canceled. Set the date/time again. Set the date/time. The clock adjustment is not factory-preset. P. 52 P. 52 The subject was too close. The picture is out of focus. Auto focus is not possible. There is condensation* on the lens. The monitor goes off. The camera is in the sleep mode. The flash does not fire. The flash is set to [$]. The subject is illuminated. Movie mode or super macro shooting is set. Move further away from the subject. To take pictures closer than 20 cm (7.9") with the zoom in the maximum WIDE position, use the super macro mode. Use focus lock to focus on the subject and then shoot. Turn the camera off and wait until it dries before turning it on again. Press the shutter button or l. Select a flash mode other than [$]. If you want the flash to fire on a brightly illuminated subject, set the flash to [#]. The flash does not fire in the movie mode or super macro shooting. P. 31 P. 18 – P. 55 P. 32 P. 32 P. 34 8 Appendix * Condensation: When it is cold outside, the water vapor in the air is rapidly cooled and turns to droplets of water. Condensation occurs when the camera is suddenly taken from a cold place into a warm room. 91 Troubleshooting You are using the camera in a cold environment. Panorama mode is set. The battery run time is brief. Possible cause Corrective action Battery performance deteriorates in low temperatures. Keep the camera warm by putting it inside your coat or clothing. The flash does not fire in the panorama mode. – P. 36 Ref. page The remaining battery power is not indicated correctly. The batteries are exhausted. When battery consumption fluctuates considerably, the camera may turn off without displaying the battery warning indicator. Replace the batteries with new ones, or charge the batteries. The green and orange lamps on the camera blink simultaneously. Replace the batteries with new ones, or charge the batteries. – – 8 Appendix 92 Troubleshooting (Playback of recorded images Possible cause Corrective action Ref. page The picture is out of focus. A subject unsuited to AF was taken. Use focus lock to focus on the subject and then shoot. P. 18 The camera moved when the shutter button was pressed. Hold the camera correctly and press the shutter button gently. Camera movement occurs easily with slower shutter speeds. When you take a picture with [$] in a night scene or a dark situation, use a tr...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias