Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
#FULL Manual flash (FULL) 1st curtain #1/4 Manual flash (1/4) #1/16 Manual flash (1/16) #1/64 Manual flash (1/64) *1 When the flash is set to the Super FP mode, it detects backlight with longer duration than for normal flash before emitting light. g “Super FP flash” (P. 37) *2 AUTO, !, # cannot be set in / mode. Setting the flash mode Direct button #..Control dial Control panel screen i..p: FLASH MODE..i 34 EN Using the built-in flash If you shoot a subject using a lens that is wider than 14 mm (equivalent to 28 mm on a 35 mm filmcamera), the light emitted by the flash may produce a vignette effect. Whether or not vignetting occurs also depends on lens type and shooting conditions (such as distance to the subject). 1 Press the # button to raise the built-in flash. • The built-in flash will pop up automatically and fire in low light conditions under the following modes. AUTO / i / & / / / I / U / G/ J/ r/ g # button 2 Press the shutter button halfway. • The # (flash stand-by) mark lights when the flash is ready to fire. If the mark is blinking, the flash is charging. Wait until charging is complete. Flash stand-by mark 3 Press the shutter button all the way. .. TIPS Viewfinder When you do not want the flash to pop up automatically: • Set [AUTO POP UP] on the [Y] menu to [OFF]. g “Auto pop up” (P. 68) Flash intensity control 3 Shooting functions Various shooting This adjusts the amount of light emitted by the flash. In some situations (e.g., when shooting small subjects, distant backgrounds, etc.), you may get better results by adjusting light emission. It is useful when you intend to increase the contrast (distinction between light and dark) of images to make the images more vivid. MENU..[X]..[w] Use bd to set the compensation value. .. TIPS To call up the flash compensation screen quickly: • Hold down the # button and the F (exposure compensation) button at the same time until the w screen appears. Use the control dial to set. xNotes • This does not work when the flash control mode on the electronic flash is set to MANUAL. • If light emission is adjusted on the electronic flash, it will be combined with the camera’s light emission setting. • When [w+F] on the [Y] menu is set to [ON], it will be added to the exposure compensation value. EN 35 Flash bracketing The camera shoots multiple frames, changing the amount of light emitted by the flash for each shot. MENU..[X]..[FL BKT] [OFF] / [3F 0.3EV] / [3F 0.7EV] / [3F 1.0EV] • You can change the EV step interval in the custom menu. g “EV step” (P. 68) • In sequential shooting, when the shutter button is pressed, the camera shoots 3 frames at a time in the following order: frame with optimum amount of light emission, frame adjusted in – direction and frame adjusted in + direction. In single-frame shooting, the amount of light emitted by the flash changes every time the shutter button is pressed. External electronic flashes (optional) 3 Shooting functions – Various shooting functions In addition to the camera’s built-in flash capabilities, you can use any of the external flash unitsspecified for use with this camera. This enables you to take advantage of a wider variety of flash shooting techniques to suit different shooting conditions. The external flashes communicate with the camera, allowing you to control the camera’s flash modeswith various available flash control modes, such as TTL-AUTO and Super FP flash. The flash can be mounted on the camera by attaching it to the camera’s hot shoe. Refer to the external flash’s manual as well. Functions available with external flash units Optional flash FL-50 FL-36 FL-20 RF-11 TF-22 Flash control mode TTL-AUTO, AUTO, MANUAL, FP TTL AUTO, FP MANUAL TTL-AUTO, AUTO, MANUAL TTL-AUTO, MANUAL GN (Guide number) (ISO100) GN50 (85 mm*) GN28 (24 mm*) GN36 (85 mm*) GN26 (24 mm*) GN20 (35 mm*) GN11 GN22 * The focal length of the lens that can be covered (Calculated based on 35 mm film camera) xNotes • The FL-40 optional flash cannot be used. Using the external electronic flash Be sure to attach the flash to the camera before turning on the flash’s power. 1 Remove the hot shoe cover by sliding it in thedirection indicated by the arrow in the illustration. • Keep the shoe cover in a safe place to avoid losing it, and put it back on the camera after flash shooting. 2 Attach the electronic flash to the hot shoe on the camera. • If the lock pin is protruding, turn the shoe lock ring as far as it will go in the direction opposite to LOCK. This will pull the lock pin back inside. Lock pin Lock ring 36 EN 3 Turn on the flash. • When the charge lamp on the flash lights up, charging is complete. • The flash will be synchronized with the camera at a speed of 1/180 sec. or less. 4 Select a flash mode. 5 Select the flash control mode. • TTL-AUTO is recommended for normal use. 6 Press the shutter button halfway. • Shooting information such as ISO sensitivity, aperture value, and shutter speed is communicated between the camera and flash. 7 Press ...