Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Câmaras - DSC-WX300 (7.88 kb)
Câmaras - DSC-WX300 (16.37 mb)
Facilidade de uso
The camera may cause a malfunction. Before turning on/off, or restarting the computer or waking the computer from sleep mode, disconnect the camera and the computer. – No guarantees are made for charging using a custom-built computer or a modified computer. x Battery life and number of images that can be recorded and played back Battery life Number of images Shooting (still images) Approx. 250 min. Approx. 500 images Typical movie shooting Approx. 80 min. — Continuous movie shooting Approx. 120 min. — Viewing (still images) Approx. 360 min. Approx. 7200 images Notes • The above number of images applies when the battery pack is fully charged. The number of images may decrease depending on the conditions of use. • The number of images that can be recorded is for shooting under the following conditions: – Using Sony “Memory Stick PRO Duo” (Mark2) media (sold separately) GB – The battery pack is used at an ambient temperature of 25°C (77°F). – – • The number for “Shooting (still images)” is based on the CIPA standard, and is for shooting under the following conditions: (CIPA: Camera & Imaging Products Association) – DISP (Display Setting) is set to [ON]. – Shooting once every 30 seconds. – The zoom is switched alternately between the W and T ends. – The flash strobes once every two times. – The power turns on and off once every ten times. • The numbers of minutes for movie shooting are based on the CIPA standard, and are for shooting under the following conditions: – Movie quality: AVC HD HQ – Typical movie shooting: Battery life based on repeatedly starting/stopping shooting, zooming, turning on/off, etc. – Continuous movie shooting: Battery life based on non-stop shooting until the limit (29 minutes) has been reached, and then continued by pressing the MOVIE button again. Other functions, such as zooming, are not operated. x Supplying power The camera can be supplied with power from the wall outlet (wall socket) by connecting to the AC Adaptor, using the micro USB cable (supplied). You can import images to a computer without worrying about draining the battery pack by connecting the camera to a computer using the micro USB cable. In addition, you can use the AC Adaptor AC-UD10 (sold separately) or ACUD11 (sold separately) for shooting to supply power when shooting. Notes • Power cannot be supplied when the battery pack is not inserted in the camera. • Shooting is not possible when the camera is connected directly to a computer or to a power outlet using the supplied AC Adaptor. • If you connect the camera and a computer using the micro USB cable while the camera is in playback mode, the display on the camera will change from the playback screen to the USB connection screen. Press (Playback) button to switch to the playback screen. GB Inserting a memory card (sold separately) Ensure the notched corner faces correctly. Inserting a memory card (sold separately) Ensure the notched corner faces correctly. 1 Open the cover. 2 Insert the memory card (sold separately). • With the notched corner facing as illustrated, insert the memory card until it clicks into place. 3 Close the cover. x Memory cards that can be used Memory card For still images For movies A Memory Stick XC-HG Duo Memory Stick PRO Duo (Mark2 only) Memory Stick PRO-HG Duo Memory Stick Duo — B Memory Stick Micro (M2) (Mark2 only) C SD memory card (Class 4 or faster) SDHC memory card (Class 4 or faster) SDXC memory card (Class 4 or faster) D microSD memory card (Class 4 or faster) microSDHC memory card (Class 4 or faster) microSDXC memory card (Class 4 or faster) • In this manual, the products in the table are collectively referred to as follows: A: “Memory Stick Duo” media B: “Memory Stick Micro” media C: SD card GB D: microSD memory card 15 Notes Notes To use a “Memory Stick Micro” media or microSD memory card with the camera, be sure to insert it into a dedicated adaptor first. x To remove the memory card/battery pack Memory card: Push the memory card in once to eject the memory card. Battery pack: Slide the battery eject lever. Be sure not to drop the battery pack. Notes • Never remove the memory card/battery pack when the access lamp (page 9) is lit. This may cause damage to data in the memory card/internal memory. Setting the clock Control Wheel ON/OFF (Power) Select items: v/V/b/B Set the numeric value of date and time: / Set: z 1 Press the ON/OFF (Power) button. Date & Time setting is displayed when you turn on the camera for the first time. • It may take time for the power to turn on and allow operation. 2 Select a desired language. 3 Select a desired geographic location by following the on-screen instructions, then press z on the control GB wheel. 4 4t [OK]. • Midnight is indicated as 12:00 AM, and noon as 12:00 PM. GB 5 Follow the instructions on the screen. • The battery pack will run out quickly when: – [Disp. Resolution] is set to [High]. Shooting still images/movies Shutter button MOVIE Mode dial W/T (Zoom) : Intelligent Auto lever : Movi...