Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• Do not subject the video light to extreme shock. It may cause the light bulb to burn out or shorten the life of the bulb. • If the voltage drops to a certain extent due to operation of the function to prevent extreme discharge of battery capacity, the light may go out. This is normal. In this case, turn off the power, and recharge the battery or use another charged battery. • Be sure to turn off the power when you change the battery. • Battery life of the battery is shorter in cold climates because battery efficiency is reduced in cold weather (10°C/50°F or less). For longer battery life, we recommend the following: – To warm the battery, put it in your pocket. (Do not put the battery together with a pocket heat pad.) Just before recording, insert the battery into the camcorder. – Charge the battery using the AC power adaptor at room temperature (from 10°C/50°F to 30°C/86°F). After use • Be sure to turn off the power. • After the light cools, put it into a case. • Be sure to remove the battery when the light is not in use or before you put it into a case. Cleaning Clean the video light with a soft dry cloth. If you clean it with a soft cloth lightly moistened with a mild detergent solution, wipe it with a soft dry cloth after cleaning. Do not use a damp cloth or any type of solvent, such as alcohol or benzine, which might damage the finish. Specifications Power source 3.6 V DC Power consumption 10 W Centre luminous intensity Approx. 400 cd Lighting direction Horizontal Lighting angle Approx. 30 degrees Continuous lighting time Battery NP-F20 NP-F30 Approx. 25 min. Approx. 40 min. (The table is an approximation of lighting time with a fully charged battery pack.) Lighting distance Approx. 1 m (3 1.5 ft.) 400 lux Approx. 3 m (9 4.5 ft.) 40 lux Approx. 5 m (16 1.2 ft.) 15 lux Color temperature 3,000°K Average life of bulb Approx. 100 hours Dimensions Approx. 47 . 87 . 65 mm (w/h/d) (1 7.8 . 3 3.8 . 2 5.8 inches) Mass Approx. 100 g (3.5 oz) (excluding the battery) Supplied sccessory Carrying pouch (1) Optional accessory XB-10DC halogen lamp Design and specifications are subject to change without notice. If you have any questions about this video light, consult your nearest Sony dealer. This mark indicates that this product is a genuine accessory for Sony video products. When purchasing Sony video products, Sony recommends that you purchase accessories with this “GENUINE VIDEO ACCESSORIES” mark. Lighting tips Arrange proper lighting to get a clear and beautiful colour picture. • A realistic picture is composed of natural light and shade. • Fluorescent lights may produce flickering in pictures. Using the video light will help you produce good pictures without colour blurs and flickering. How to direct the video light When the subject is lit from behind (backlighting) by other light sources, use the video light to illuminate the front part of the subject you want to shoot. Be sure not to directly shoot the sun with your video camera recorder. Using the video light (See Fig. A) Use the NP-F20/F30 lithium ion battery. The NP-F10 cannot be used with the video light. Be sure to set the POWER switch to OFF before attaching the battery. 1 Attach a fully charged battery to the video light as shown in the illustration. 2 Turn the light attachment knob anticlockwise to loosen. 3 Attach the video light to the accessory shoe. 4 While pressing the small button on the POWER switch, set it to ON. The video light will gradually turn on. Note on the power source You cannot operate the video camera recorder with the video light’s battery. Attach another battery to the video camera recorder. Removing the battery (See Fig. B) 1 Set the POWER switch to OFF. 2 While pressing the BATT RELEASE button on the video light, slide out the battery in the direction of the arrow. Replacing the bulb (See Fig. C) Use a Sony XB-10DC halogen lamp (not supplied). 1 While pressing the top part of the video light, open the cover towards you. 2 Remove the used bulb holding it at the base then insert a new bulb. When removing the bulb, turn it so that the indented part on the bulb guard and the projection on the holder align, and then pull it out. When inserting the bulb, align the indented part on the bulb guard and the projection on the holder, and then turn the bulb while pushing in it. 3 Replace the cover. Cautions • The surface of the cover becomes hot when in use. Be sure that the cover is cool enough to handle before removing. • The bulb becomes hot when it is burnt out. Be sure that the bulb is cool enough to handle. • Do not touch the reflector of a new bulb with bare hands. Wrap it with a soft dry cloth when replacing. Clean off fingerprints or dirt if necessary. • Insert a new bulb into its socket at a straight angle. AVERTISSEMENT Afin d’eviter tout risque d’incendie ou d’electrocution, ne pas exposer l’appareil a la pluie ni a l’humidite. Pour eviter tout risque de decharge electrique, ne pas ouvrir le boitier. Ne confier l’entretien qu’a...