Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Câmaras - SAL75300 (2.09 mb)
Câmaras - SAL75300 (2.66 mb)
Facilidade de uso
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: – Reorient or relocate the receiving antenna. – Increase the separation between the equipment and receiver. – Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. – Consult the dealer or an experienced radio/TV technician for help. For the customers in Canada This Class B digital apparatus complies with Canadian ICES-003. Notes on use • Do not leave the lens in direct sunlight. If sunlight is focused onto a nearby object, it may cause a fi re. If circumstances necessitate leaving the lens in direct sunlight, be sure to attach the lens cap. • Be careful not to subject the lens to mechanical shock while attaching it. • Always place the lens caps on the lens when storing. • Do not keep the lens in a very humid place for a long period of time to prevent mold. • After attaching the lens, do not carry the camera by holding the lens. • Do not touch the lens contacts. If dirt, etc., gets on the lens contacts, it may interfere or prevent the sending and receiving of signals between the lens and the camera, resulting in operational malfunction. Vignetting When you use lens, the corners of the screen become darker than the center. To reduce this phenomena (called vignetting), close the aperture by 1 to 2 stops. Condensation If your lens is brought directly from a cold place to a warm place, condensation may appear on the lens. To avoid this, place the lens in a plastic bag or something similar. When the air temperature inside the bag reaches the surrounding temperature, take the lens out. Cleaning the lens • Do not touch the surface of the lens directly. • If the lens gets dirty, brush off dust with a lens blower and wipe with a soft, clean cloth (Cleaning Cloth KK-CA (optional) is recommended). • Do not use any organic solvent, such as thinner or benzine, to clean the lens or the camera cone. . Names of parts 1…Zooming ring 2…Focal-length index 3…Lens contacts 4…Mounting index 5…Focal-length scale 6…Focusing ring . Attaching/detaching the lens To attach the lens (See illustration .–..) 1 Remove the rear and front lens caps and the camera body cap. • You can attach/detach the front lens cap in two ways, (1) and (2). When you attach/detach the lens cap with the lens hood attached, use method (2). 2 Align the orange index on the lens barrel with the orange index on the camera (mounting index), then insert the lens into the camera mount and rotate it clockwise until it locks. • Do not press the lens release button on the camera when mounting the lens. • Do not mount the lens at an angle. To remove the lens (See illustration .–..) While pressing and holding the lens release button on the camera, rotate the lens counterclockwise until it stops, then detach the lens. . Attaching lens hood It is recommended that you use a lens hood to reduce fl are and ensure maximum image quality. Fit the hood into the mount on the end of the lens barrel and rotate the hood clockwise until it clicks. • When using a built-in camera fl ash, make sure to remove the lens hood to avoid blockage of the fl ash light. • When storing, turn over the lens hood and place it onto the lens backwards. . Zooming Rotate the zooming ring to the desired focal length. . Focusing When using the auto focus, the camera focuses the lens automatically. When focusing manually, set your camera to the manual focus and rotate the focusing ring while looking through the viewfi nder. The focus signal in the viewfi nder indicates the current degree of the focus. Specifi cations Name (Model name) Equivalent 35mm-format focal length*1 (mm) Lens groupselements Angle of view 1*2 Angle of view 2*2 Minimum focus*3 (m (feet)) Maximum magnifi cation (X) Minimum f-stop Filter diameter (mm) Dimensions (maximum diameter . height) (mm (in.)) Mass (g (oz.)) 75-300mm F4.5-5.6 (SAL75300) 112.5-450 10-13 32°-8°10’ 21°-5°20’ 1.5 (4.9) 0.25 f/32-38 55 Approx. 71.122 (2 13/16.4 13/16) Approx. 460 (16 1/4) *1 The value for equivalent 35mm-format focal length is based on Digital Single Lens Refl ex Cameras equipped with an APS-C sized image sensor. *2 The value of angle of view 1 is based on 35mm-format cameras, and that of angle of view 2 is based on Digital Single Lens Refl ex Cameras equipped with an APS-C sized image sensor. *3 Minimum focus is the shortest distance from the image sensor to the s...