Assessments - 3, GPA: 4
(
)
)
|
por este dispositivo também tem outras instruções :
Facilidade de uso
• Time required to charge fully depleted Nickel-Metal Hydride batteries (supplied) at a temperature of 25°C (77°F) is approximately 6 hours. Charging may take longer under certain circumstances or conditions. • The CHARGE lamp may remain lit longer than six hours, but this is not a malfunction. 1 Battery charger 2 Connect the power cord (mains lead). 3 To wall outlet (wall socket) Power cord (mains lead) 1 Insert the batteries. CHARGE lamp Light on: Charging Light off: Completed (Remove the batteries.) Match 3/# and insert. 4 Insert the charged batteries. While pressing OPEN, open the battery cover. Match 3/# and insert. Close the cover. Bottom Using the zoom Pressing the button slightly zooms slowly and pressing the button fully down zooms fast. • When the zoom scale exceeds 12., the camera uses the Digital Zoom function. For details on the [Digital Zoom] settings and the image quality t“User’s Guide/Troubleshooting” (page 57) • Even if you press the button fully down, the camera zooms slowly while shooting a movie. 2 Shoot with the shutter button. Still image: Press and hold the shutter button halfway down to focus. AE/AF lock indicator Flashing t lit/beeps Press the shutter button fully down. The shutter sounds. Movie: Press the shutter button fully down. To stop recording, press the shutter button fully down again. AF range finder frame REC Zoom button Zoom button 5 Shoot images easily (Auto adjustment mode) Changing Image Brightness (EV) (Adjusting exposure) Before Step 2, press b ( ) on the control button. Adjust the image brightness by turning the jog dial. + (Brighter) / – (Darker). • The compensation value can be set in 1/3EV increments (+2.0EV to –2.0EV). • 0EV indicates the value judged as the most suitable by the camera. • The exposure value returns to 0EV when the mode dial position is changed or the power is turned off (Only when the mode dial is set to ). • For details on the exposure t“User’s Guide/ Troubleshooting” (page 14) • For details on the jog dial t“User’s Guide/ Troubleshooting” (page 32) Selecting a flash mode for still images Before step 2, press v ( ) on the control button repeatedly until the desired mode is selected. • The flash automatically pops up and strobes. Close the flash by hand after use. • The flash range (when [ISO] is set to [Auto]) W side: Approx. 0.3 to 9.0 m (11 7/8 inches to 29 feet 6 3/8 inches) T side: Approx. 0.9 to 6.8 m (35 1/2 inches to 22 feet 3 3/4 inches) • The flash strobes twice. The first time is to adjust the light quantity. Shooting close-up (Macro) Before step 2, press B ( ) on the control button. To cancel, press B again. • Setting the zoom all the way to the W side is recommended. • The in-focus range becomes narrow, and the complete subject may not entirely be in focus. • The Auto Focus speed drops. Shortest shooting distance from the lens surface Setting all the way to the W side: Approx. 2 cm (13/16 inches) Setting all the way to the T side: Approx. 90 cm (35 1/2 inches) Using the self-timer Before Step 2, press V ( ) on the control button repeatedly until the desired mode is selected. Press the shutter button, the self-timer lamp flashes, and a beep sounds until the shutter operates. To cancel, press V until the indicator disappears. • If you use the 2-second delay self-timer, you may prevent blur. No indicator Flash Auto Strobes when there is insufficient light or backlight (default setting) Flash forced on Slow synchro (Flash forced on) The shutter speed is slow in a dark place to clearly shoot the background that is out of flash light. Flash forced off Toward – Toward + No indicator Not using the self-timer Setting the 10-second delay selftimer Setting the 2-second delay selftimer Self-timer lamp If you shoot a still image of a subject that is difficult to focus on • The shortest shooting distance is 50 cm (19 3/4 inches) (W)/90 cm (35 1/2 inches) (T). Shoot in the close-up (Macro) mode (left) when shooting a subject closer than the shortest shooting distance. • When the camera cannot focus on the subject automatically, the AE/AF lock indicator changes to flashing slowly and the beep does not sound (except for Continuous AF, t“User’s Guide/Troubleshooting” (page 57)). Recompose the shot and focus again. Subjects difficult to focus on are: Anti-blur function The anti-blur function is equipped with the camera. To cancel the anti-blur function, set the mode dial to other than , then press the (STEADY SHOT) button (above) to display the indicator. To turn on the anti-blur function, press the (STEADY SHOT) button again. • When the mode dial is set to , you cannot cancel the anti-blur function. • You can change the anti-blur mode t“User’s Guide/Troubleshooting” (page 61). To brighten up the display (DSC-H2: Finder only) If you view images in bright light such as in an outdoor location, adjust the brightness of the backlight up. However, the battery power may decrease faster under such condition. If you press the (Screen display switch) button l...
Este manual também é adequado para os modelos :Câmaras - DSC-H2 (2.99 mb)