Assessments - , GPA:
(
)
)
Fabricante : Sony
Arquivo Tamanho: 3.46 mb
Arquivo Nome :
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
por este dispositivo também tem outras instruções :
Facilidade de uso
(Center weighted) While emphasizing the central area of the screen, this mode measures the average brightness of the entire screen. (Spot) This mode measures light only in the spot metering circle in the center of the frame. Shooting techniques • Use (Multi segment) metering for general shooting. • When shooting a subject with strong contrast in the focus area, measure the light of the subject you want to shoot with the proper exposure using Spot metering, then perform AE lock shooting (page 83). Setting ISO Sensitivity to light is expressed by the ISO number (recommended exposure index). The larger the number, the higher the sensitivity. 1 Press the ISO button to display ISO button the ISO screen. 2 Select the desired value with v/V on the controller. • The larger the number, the higher the noise level. Notes • When ISO is set to [AUTO], ISO is automatically set as follows. Recording mode ISO AUTO, Scene Selection The range differs depending on the mode P, A, S 100 – 400 • The [AUTO] setting is not provided in recording mode M. If you change the recording mode to M with the [AUTO] setting, it is switched to [100]. Set the ISO according to your shooting conditions. Adjusting the color tones (White balance) The color tone of the subject changes depending on the characteristics of the light source. The table below shows how the color tone changes based on various light sources, compared with a subject that appears white under the sunlight. Weather/ lighting Daylight Cloudy Fluorescent Incandescent Characteristics of light White Bluish Green-tinged Reddish White balance is a feature that adjusts the color tone to approximate what you see. Use this feature when the color tone of the image did not come out as you expected, or when you want to change the color tone on purpose for photographic expression. Note • If the only light source available is a mercury lamp or a sodium lamp, the camera will not be able to acquire the accurate white balance because of the characteristics of the light source. Use the flash in such cases. Adjusting the white balance to suit a specific light source (Auto/Preset white balance) Using the function Fn button t [White balance] t Select the desired setting • When [AWB] is not selected, you can finely adjust the color tone with b/ B on the controller. Adjusting it toward + turns the image reddish and adjusting it toward – turns the image bluish. AWB (Auto WB) The camera automatically detects a light source and adjusts the color tones. (Daylight) If you select an option to suit a specific light source, the color tones are adjusted for the light source (preset white balance). (Shade) (Cloudy) (Tungsten) (Fluorescent) (Flash) Shooting techniques • Use the white balance bracket function if you cannot get the desired color in the selected option (page 100). • When you select [5500K] (ColorTemperature) or [00] (Color filter), you can adjust the value to the desired value (below). • When you select (Custom), you can register your setting (page 93). Setting the color temperature and a filter effect (Color Temperature/Color filter) Fn button t [White balance] t [5500K] (ColorTemperature) or [00] (Color filter) • To set the color temperature, select the value with b/B. • To set the color filter, select the compensation direction with b/B. Note • Since color meters are designed for film cameras, the values differ under fluorescent/ sodium lamp/mercury lamps. We recommend that you use the custom white balance or do a test shooting. 5500K*1 (ColorTemperature) Sets the white balance by the color temperature. The higher the number, the more reddish the image and the lower the number, the more bluish the image. 00*2 (Color filter) Achieves the effect of CC (Color Compensation) filters for photography. Based on using the set color temperature as the standard, the color can be compensated to G (Green) or M (Magenta). *1 The value is the color temperature value currently selected. *2 The value is the Color filter value currently selected. Registering the color tones (Custom white balance) In a scene where the ambient light consists of multiple types of light source, use of custom white balance is recommended in order to accurately reproduce the whiteness. 1 Fn button t [White balance] t 2 Select [ SET] with b/B on the controller. 3 Hold the camera so that the white area fully covers the spot- metering circle and press the shutter button down. The shutter clicks and the calibrated values (ColorTemperature and Color filter) are displayed. Using the function 4 Press the center of the controller. The monitor returns to the recording information display with the memorized custom white balance setting retained. • The custom white balance setting is registered in this operation is effective until a new setting is registered. Note • The message “Custom WB error” indicates that the value is beyond the expected range. (When the flash is used on a subject in close proximity or a subject with a bright color is in t...
Este manual também é adequado para os modelos :Câmaras - DSLR-A300 (3.46 mb)
Câmaras - DSLR-A300K (3.46 mb)
Câmaras - DSLR-A300X (3.46 mb)
Câmaras - DSLR-A350H (3.46 mb)