Assessments - 0, GPA: 0
(
)
)
|
Facilidade de uso
• Select a field: Press JK(changes between D, M, Y, hour, and minute). • Edit the date and time: Press HI. • Confirm the settings: Select the minute field and press the kbutton. The Basics of Shooting and Playback 20140101 00 00 Date and time Edit D M Y h m 7 Select Yes and press the kbutton. • When settings are finished, the lens extends and the camera switches to shooting mode. Date and time Edit Yes No OK? 15/05/2014 15 30 The Basics of Shooting and Playback C Changing the Language or the Date and Time Setting • You can change these settings using the Language and Time zone and date settings in the z setup menu (A73). • You can enable or disable daylight saving time in the z setup menu by selecting Time zone and date followed by Time zone. Press the multi selector K and then H to enable daylight saving time and move the clock forward one hour, or I to disable daylight saving time and move the clock back one hour. C The Clock Battery • The camera’s clock is powered by a built-in backup battery. The backup battery charges when the main battery is inserted into the camera or when the camera is connected to an optional AC adapter, and it can run the clock for several days after about ten hours of charging. • If the camera’s backup battery becomes exhausted, the date and time setting screen is displayed when the camera is turned on. Set the date and time again. See step 3 (A16) of “Preparation 4 Setting the Display Language, Date, and Time” for more information. C Imprinting the Shooting Date on Printed Images • You can permanently imprint the shooting date on images as they are captured by setting Print date in the setup menu (A73). • You can use the ViewNX 2 software (A77) to print the shooting date on images that were captured without using the Print date option. Step 1 Turn the Camera On 1 Press the power switch. • The monitor turns on. • To turn the camera off, press the power switch again. 2 Check the battery level indicator and the number of exposures remaining. Battery Level Indicator Number of exposures remaining Display Description b The battery level is high. B The battery level is low. P Battery exhausted. The camera cannot capture images. Recharge the battery. 14001400 8m0s8m 0s Battery level indicator Number of Exposures Remaining The number of images that can be taken is displayed. • Cis displayed when no memory card is inserted in the camera, and images are saved in the internal memory. The Basics of Shooting and Playback C The Auto Off Function Flashes 14001400 8m 0s0s No operations performed No operations performed 3 min Camera enters standby mode. Camera turns off. • The time that elapses before the camera enters standby mode is about one minute. The time can be changed using the Auto off setting in the setup menu (A73). • While the camera is in standby mode, the monitor turns back on if you perform any of the following operations: - Press the power switch, shu...