Assessments - 0, GPA: 0
(
)
)
|
por este dispositivo também tem outras instruções :
Speakers - RDP-X200IPN (2.26 mb)
Speakers - RDP-X200IPN (1.18 mb)
Speakers - RDP-X200IPN (2.21 mb)
Speakers - RDP-X200IPN (2.2 mb)
Facilidade de uso
Do not place the unit anywhere near water. guaranteed. adaptor. compliance with the essential requirements and other — A device featuring Bluetooth function is required to NOTES ON LITHIUM BATTERY relevant provisions of Directive 1999/5/EC. For details, conform to the Bluetooth standard specified by 2 Connect the AC adaptor to the DC IN 20V jack . Wipe the battery with a dry cloth to assure a good please access the following URL: Bluetooth SIG, Inc. and be authenticated. contact. on the back of this unit firmly and plug it into a — Even if the connected device conforms to the above . Be sure to observe the correct polarity when installing wall outlet. mentioned Bluetooth standard, some devices may not the battery. be connected or work correctly, depending on the . Do not hold the battery with metallic tweezers, features or specifications of the device. otherwise a short-circuit may occur. . Depending on the device to be connected, it may require some time to start communication. When to replace the battery With normal use, the battery (CR2025) should last for about 6 months. When the remote can no longer operate the unit, replace the battery with a new one. Operations How to handle an iPod To set an iPod To remove an iPod Notes . An iPod in a case or cover can be set in this unit. However, if the case or cover interferes with the connection, remove the case or cover before setting the iPod on the Dock Connector. . When placing or removing the iPod, hold it at the same angle as the Dock Connector on the unit. Do not pull the iPod forward too far. . When placing or removing the iPod, hold the unit securely. . Do not twist or bend the iPod, as this may result in connector damage. . Remove the iPod when transporting it; otherwise, a malfunction may result. To turn the unit on/off Press ... (On/Standby). The power indicator lights up when the unit is turned on. Adjusting the volume Press VOLUME +/. (VOL +/. on the remote). Tip . The power indicator flashes three times in green when the sound is set to either maximum or minimum volume. Operating an iPod on the Dock 1 Set the iPod on the Dock Connector. The Dock Connector can be tilted slightly. For details, see “How to handle an iPod.” 2 Press .... 3 Press iPod to activate the function for iPod. The iPod indicator lights up. 4 Press .. The iPod begins to play back. If the iPod does not start playing back, operate directly on the iPod. You can operate the connected iPod via this unit or the iPod itself. To Press Pause playback . To resume play, press again. Go to the next track . (forward) on the remote Go back to the previous track . (backward)* on the remote Locate a point while listening to the sound . (forward) or . (backward) on the remote while playing and hold until you find the desired point. Go back to the previous menu MENU on the remote Select a menu item or a track for playback . (up)/. (down) on the remote To Press Exe...