The skillet must not be connected to a wall outlet during cleaning. A Warning! Do not immerse the temperature controller (7) in water or any other liquids. This may cause electric shock or damage the appliance. •32 soft cloth. • Rinse well and dry all parts thoroughly. • Place the skillet on a heat resistant work-surface. NOTE: Do not use steel wool, abrasive cleaners, or metal scouring pads on cooking surfaces as this will damage the non-stick coating. • Lightly brush cooking surface wi

The following functions are available: Function LED Function Description quick Quick Heat From normal temperature setting: Heat the product to maximum temperature for 7 minutes and return to the selected temperature. From save mode: Heat the product to maximum temperature for 8 minutes and return to low temperature. From buffet mode: Quick function does not operate. save Conserve Maintain the temperature indefinitely at 165°F to conserve or keep cooked food warm. buffet Buffet Maintain the t

DO NOT ALLOW THE CORD TO HANG OVER THE EDGE OF THE COUNTER WHERE IT MAY BE GRABBED BY CHILDREN OR BECOME ENTANGLED WITH THE USER. DO NOT USE WITH AN EXTENSION CORD. POLARIZED PLUG This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, this plug is intended to fit into a polarized outlet only one way. If plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not attempt to

Leave any servicing or repairs to qualified personnel. WARNING: Always turn the temperature control knob (12) to •. Disconnect the power plug (10) from the wall outlet before disconnecting the magnetic plug (19) from the socket. Allow all parts of the deep fryer to cool down completely. Notes: • Do not immerse the power cord with plug (10) into water or any liquids. • Do not attempt to attach the magnetic plug (19) permanently to the deep fryer. • Do not use abrasive cleaners, steel wool, o

UU), then you may resume frying. HINTS FOR USING AND STORING OIL Choosing the right cooking oil As a general rule, choose cooking oils with a high smoke point and avoid flavored oils. Suitable: Pure corn oil, blended vegetable, soybean, sunflower, or grape seed oil. Not suitable: Olive, peanut and walnut oil. Lard. 10 HINTS FOR USING AND STORING OIL Cooking with oil Cooking oil can enhance the food's flavor - or spoil its taste. As with any other food component, freshness and correct h

1 2 4 3 6 8 7 5 9 E ILLUSTRATIONS c a b 12 d e f 12 g h E how to use your skillet 1. Turn temperature control to “OFF“ a Plug temperature control probe securely into receptacle on skillet, plug into standard 120v AC outlet (ill. b) and turn temperature control to desired setting (ill. c). 2. The temperature control indicator light will come on when you set or adjust the temperature. Once the desired temperature is reached, the indicator light will cycle during use, indicating the selected temper

End Piece) 1 SK50531 Heat Spreader (LH. End Piece) 1 SK5D532 Heat Spreader (with Thermostat cut-out) 1 SK50213 Heat Spreader (Plan) 3JS 15 SK50416 Washer, Spherical 28,36 16 FA21024 Nut, 5/16-18 28,36 Use only replacement parts which are factory supplied as to preserve trie certification of Underwriters Laboratories. American Gas Association, Canadian Standards Association or Canadian Gas Association (as applicable). The use of other than factory supplied replacement parts w81 void the

It should be minimum T WC natural gas or 12" WC LP gas. If gas pressure is correct replace defective gas control valve. 3. in an operating situation and with control thermostat set at #10. does the operating (upper) pilot fight go out too early? (Burners shut off too early) Yes No Go to step # 4. Go to step # 2. 4. Immediately after operating (upper) pilot goes out turn control thermostat to #1. Can you hear or feel the thermostat “clicking" off? Yes No. Adjust or replace safety thermostat (