Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
2. Keep safety interlock B pressed down and pull starting lever C on the upper handle 3. The Lawn Scarifier starts. 3. Release safety interlock B. When in operation, the extension cable 0 must always be guided in the direction you are working and to the side of the area to be worked on. Always work away from the connection cable. 14 Blockage Protection: If the aerator cylinder is blocked, e.g. by a foreign body, immediately release the starting lever. If the blockage lasts longer than 10 seconds and the starting lever has not been released, blockage protection is activated. In this case immediately release the starting lever. The Lawn Scarifier can be switched on again after cooling down for approx. 1 minute. Danger of injury! A If blockage protection is activated and the starting lever is not released, the Lawn Scarifier starts again automatically after approx. 1 minute. 6. Maintenance GB Cleaning Lawn Scarifier: Adjusting for wear: D Danger! The aerator cylinder can cause injuries! AV Prior to maintenance, unplug from the mains and wait until the Scarifier drum has stopped. V Wear working gloves for performing maintenance. The Lawn Scarifier should be cleaned after each time it is used. Risk of injury and physical damage! AV Do not clean Lawn Scarifier under running water (particularly under high pressure). V Do not use hard or pointed objects for cleaning the Lawn Scarifier. v Remove grass and deposits from wheels, aerator cylinder and housing. The Lawn Scarifier is subject to wear in use due to the way in which it works. The more intensively the Lawn Scarifier is used, the greater the wear on the spring tines. Hard or very dry ground accelerates wear as does excessive use of the Lawn Scarifier. If the results of your work with the Lawn Scarifier become increasingly worse due to wear of the spring tines, the aerator cylinder can be adjusted twice. The aerator cylinder has 4 adjustment positions: • Transport position • Aerating position 1 : • Aerating position 2 : If the springs are worn (the scarifier roller is lowered by 3 mm). • Setting 3 : Second setting for worn springs (the scarifier roller is lowered by a further 3 mm). Push wear compensation lever D gently away from the housing and move to the position required. Note:Wear adjustment is not used for height adjustment. Adjustment of the aerator cylinder without visible wear can cause damage to the aerator cylinder or overload the motor. 15 7. Trouble-Shooting GB Replacing spring tines: EFGHIJ LKJ Danger! The aerator cylinder can cause injuries ! AV Prior to rectifying faults, unplug from the mains and wait until the aerator cylinder has stopped. V Wear working gloves when rectifying faults. If the aerator cylinder is not yet worn but individual springs have broken, these must be replaced. Only original GARDENA replacement springs may be used. • Replacement spring tines for Electric Aerator GARDENA ES 500 Art. 4094 1. Unscrew two screws E on the underside of the housing. 2. Lift aerator cy...
Este manual também é adequado para os modelos :Cortadores de grama - ES 500 (547.12 kb)
Cortadores de grama - ES 500 (547.12 kb)
Cortadores de grama - ES 500 (547.12 kb)
Cortadores de grama - ES 500 (547.12 kb)