Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
• Safety • Assembly • Operation • Maintenance • Parts PRINTED IN U.S.A. FORM NO. 49526 (2/05) Sears, Roebuck and Co., Hoffman Estates, IL 60179 U.S.A. IMPORTANT - READ THIS FIRST!!! For Missing Parts or Assembly Questions Please Call 866-576-8388 Mon.-Fri. 7 am - 5 pm CST. FAX 217-728-2032 or e-mail info@agri-fab.com Missing parts will be sent UPS in 24 hours directly to your home. TABLE OF CONTENTS SAFETY RULES..........................................................2 FULL SIZE HARDWARE CHART................................3 CARTON CONTENTS.................................................3 ASSEMBLY..................................................................4 OPERATION................................................................5 MAINTENANCE/STORAGE ........................................6 REPAIR PARTS ILLUSTRATION................................7 REPAIR PARTS LIST ..................................................7 PARTS ORDERING/SERVICE .....................Back Page WARRANTY LIMITED ONE YEAR WARRANTY For one year from the date of purchase, when this product is maintained and lubricated according to the operating and maintenance instructions in the owner's manual, Sears will repair any defect in material or workmanship free of charge. If this product is used for commercial or rental purposes, this warranty applies for only 90 days from the date of purchase. This warranty does not cover repairs necessary because of operator negligence or abuse, including the failure to maintain the equipment according to instructions contained in the owner's manual. WARRANTY SERVICE IS AVAILABLE BY CONTACTING THE NEAREST SEARS SERVICE CENTER/DEPARTMENT IN THE UNITED STATES. This warranty applies only while this product is in the United States. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co. D/817 WA. Hoffman Estates, Chicago, IL 60179 MODEL NUMBER: 486.24537 SERIAL NUMBER: __________________ DATE OF PURCHASE: __________________ The model number and serial numbers will be found on a decal attached to the hitch assembly. You should record both the serial number and the date of purchase and keep in a safe place for future reference. SAFETY Any power equipment can cause injury if operated improperly or if the user does not understand how to operate the equipment. Exercise caution at all times, when using power equipment. • Read this owners manual and your vehicle and sleeve • Vehicle braking and stability may be affected with the hitch owners manuals before using this rake. attachment of this rake. Drive slowly with the rake in • Do not allow children to operate the vehicle or rake. transport position. Stay off of steep slopes. • Do not allow adults to operate the vehicle or rake • Stop and inspect for damage after striking an object. without proper instructions. Repair any damage before continuing operation. • Do not allow anyone to ride on the rake. • Keep all nuts and bolts tight and be sure the • Before lowering and operating the rake, be sure no equipment is in safe operating condition. one is near the area of operation. • Always place the sleeve hitch in the lowered position • Lower the rake when leaving the vehicle unattended. when installing or removing the rake. Look for this symbol to point out important safety precautions. It means--Attention!! Become alert!! Your safety is involved. 2 3 HARDWARE PACKAGE CONTENTS REF. QTY. DESCRIPTION REF. QTY. DESCRIPTION A 24 Hex Bolt, 3/8" x 1" B 24 Nylock Hex Nut, 3/8" C 1 Slotted Hex Nut, 1" D 1 Haircotter Pin E 1 Pivot Pin F 1 Cotter Pin CARTON CONTENTS 1. Hitch Assembly 2. Rake Pivot Assembly 3. Rake Tines (24) A C B D E F SHOWN FULL SIZE 1 2 3 4 ASSEMBLY TOOLS REQUIRED FOR ASSEMBLY (2) 9/16" Wrenches (2) 1-1/2" Wrenches or 14" Adjustable Wrenches REMOVAL OF PARTS FROM CARTON • Remove all parts and hardware packages from the carton. Lay out all parts and hardware and identify. ASSEMBLING THE RAKE • Attach the 24 rake tines to the rake pivot assembly using a 3/8" x 1" hex bolt and 3/8" nylock hex nut for each tine. Insert the ends of the tines through the slots in the rear of the rake pivot assembly. Make sure all nuts and bolts are securely tightened. See fi gure 1. • Align the hitch assembly (pointing in direction shown) and the rake assembly. Place the hitch assembly down onto the threaded stud on the rake assembly and install the 1" slotted hex nut onto the threaded stud. Tighten the nut until it is just snug. See fi gure 2. FIGURE 1 FIGURE 2 • Back the slotted nut off until the fi rst slot in the nut lines up with the hole in the threaded stud. If the hitch assembly will not pivot on the threaded stud, back the nut off to the next slot. Install the cotter pin through the stud and spread the ends of the pin. See fi gure 3. FIGURE 3 3/8” x 1” HEX BOLT 3/8” NYLOCK NUT RAKE TINE RAKE PIVOT ASSEMBLY 1" SLOTTED HEX NUT COTTER PIN STUD HOLE 1" SLOTTED HEX N...