Assessments - , GPA:
(
)
)
Fabricante : Shindaiwa
Arquivo Tamanho: 2.12 mb
Arquivo Nome : a9741d4c-681f-43df-8059-975d1bcddf2d.pdf
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
LE242 IMPORTANT Safety and Operation Information Labels: Make sure all information labels are undamaged and readable. Immediately replace damaged or missing information labels. New labels are available from your local authorized Shindaiwa dealer. Figure 3 Product Description Using the accompanying illustrations as a guide, familiarize yourself with this unit and its various components. See Figure 4. Understanding your unit helps ensure top performance, long service life, and safer operation. LE242 LAWN EDGER Throttle Interlock Ignition Switch Grip Handle Cutting Attachment Shield WARNING! Do not make unauthorized modifications or alterations to any of these units or their components. Outer Tube Fuel Tank Throttle Trigger IMPORTANT! The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal operation. Gear case Cutting Attachment Prior to Assembly Before assembling, make sure you have all the components required for a complete unit: . Engine and outer tube assembly with handle . Gearcase/Debris shield assembly . Kit containing this manual and tool kit for routine maintenance. Tool kits vary by model and may include a hex wrench, a spark plug/screwdriver combination wrench, and a scraper. Carefully inspect all components for damage. Figure 4 Specifications LE242 dry weight (Including attachments)...........................................12.8 lb./5.8 kg Engine model..........................................................................S242E Engine type.......................................................2-cycle with catalyst Bore x stroke.............................................1.3 x 1.1 in./33 x 28 mm Displacement.......................................................1.5 cu. in./ 23.9 cc Maximum power......................................................1.0 HP/0.8 kW @ 8000 rpm (min-1) Fuel/oil ratio..............................50:1 with ISO-L-EGD or JASO FC class 2-cycle mixing oil* Carburetor type...............................Walbro WYK, diaphragm-type Fuel tank capacity....................................................22.3 oz./670 ml Ignition............................................................One-piece electronic, transistor-controlled Spark plug.....................................................................NGK BPMR6A Air cleaner type..............................................................Non-reversible Foam Filter Element Starting method ............................................................................Recoil Stopping method ................................................................Slide switch Transmission type.................................Automatic, centrifugal clutch w/bevel gear EPA Emission Compliance Period**..........................................................Category A ** The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operating hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125 hours (Intermediate) and A = 300 hours (Extended). * meets or exceeds these specifications and is recommended for all Shindaiwa products. Specifications are subject to change without notice. Assembly and Adjustments Install Gearcase Assembly 1. Loosen gearcase clamp screw. 2. Remove the gearcase index screw. 3. Slide the gearcase oriented as shown in Figure 5 onto the shaft tube insuring that the flex drive is engaged in the gearcase. NOTE: It may be necessary to pull the flex cable out from the shaft tube, engage into the gearcase and then slide the assembly onto the shaft tube. 4. Reinstall the index screw and tighten securely. 5. Tighten the clamp screw and torque to 52 – 69 inch pounds. Figure 5 Assembly and Adjustments Adjust Throttle Lever Free Play The throttle lever free play should be approximately 3/16-1/4 inch (4-6 mm). See Figure 6. Make sure that the throttle lever operates smoothly without binding. If it becomes necessary to adjust the lever free play, follow the procedures and illustrations that follow. 3. Turn the cable adjuster in or out as required to obtain proper free play 3/16-1/4 inch (4-6 mm). See Figure 8. 4. Tighten the locknut. Cable Adjuster Lock Nut 251043 Figure 7 1. Loosen the air cleaner cover knob and remove the air cleaner cover. See Figure 7. 2. Loosen the lock nut on the cable adjuster. See Figure 8. Figure 8 3/16-1/4 inch (4-6 mm) Throttle Free Play Figure 6 5. Reinstall the air cleaner cover. Mixing Fuel Examples of 50:1 mixing quantities n 1 gallon of gasoline to 2.6 oz. mixing oil n 5 liters of gasoline to 100 ml. mixing oil CAUTION! This engine is designed to operate on a 50:1 mixture consisting of unleaded gasoline and ISO-L-EGD or JASO FC class 2-cycle mixing oil only. Use of non-approved mixing oils can lead to excessive carbon deposits. CAUTION! Some types of gasoline contain alcohol as an...
Este manual também é adequado para os modelos :Cortadores de grama - LE242 (2.12 mb)