Assessments - , GPA: ( )

Instruções de Operação Craftsman, Modelo C944.511571

Fabricante : Craftsman
Arquivo Tamanho: 906.98 kb
Arquivo Nome :

Língua de Ensino:

O documento está colocado, por favor, espere

Baixe o seu Fechar

O documento está colocado, por favor, espere

Baixe o seu Fechar

etc. _ ThrownObjects Safety Boots __" Glasses Blades move Allow blades to stop momentarilyafter the before removing themfrom the cut. trigger is --^-'"_l_atl_uaii°n _ Safety Decals TRANSPORTING AND STORAGE • Do not grasp or hold exposed blade. • Stop powerhead before leaving work area, • Allow powerhead and gearbox to cool before storing or transporting it in a vehicle. • Store unit and fuel in area where fuel vapors cannot reach sparks or open flames from water heaters, electric motors or switches, furnaces, etc. • Store attachment so blade cannot accidentally cause injury. • Store attachment indoors, out of reach of children. If situations occur which are not covered in this manual, use care and good judgment. If you need assistance, call 1-800-235-5878. • Do not force the unit. Use only for jobs explained in this manual. Use only for edging. Do not abuse unit. Do not use in rain or wet locations. • To reduce the risk of fire, do not allow excessive grass, leaves, or grease to accumulate on the attachment. • Objects struck by the cutting member can cause serious injuries to persons. The lawn should always be carefully examined and cleared of all objects prior to edging. • Never operate without blade shield in place. WARNING: Blades can throw objects violently • You can be blinded or injured. • Wear safety glasses and boots. WARNING: Hazard zone for thrown objects • Blades can throw objects violently. • Others can be blinded or injured. • Keep people and animals 50 feet (15 m) away. WARNING: Blades move momentarily after the trigger is released. • The blades can seriously cut you or others, • Allow blades to stop before removing them from the cut. ,_ WARNING: Read instruction Manual • Follow all warnings and instructions, • Failure to do so can result in serious injury. SPECIAL NOTICE: Exposure to vibra tions through prolonged use of gasoline powered hand tools could cause blood vessel or nerve damage in the fingers, hands, and joints of people prone to cir culation disorders or abnormal swell ings. Prolonged use in cold weather has been linked to blood vessel damage in otherwise healthy people. If symptoms occur such as numbness, pain, loss of strength, change in skin color or texture. or loss of feeling in the fingers, hands, or joints, discontinue the use of this tool and seek medical attention. An anti- vibration system does not guarantee the avoidance of these problems. Users who operate power tools on a continual and regular basis must monitor closely their physical condition and the condi tion of this unit. SAVE THESE INSTRUCTIONS 5 CARTON CONTENTS Check carton contents against the fol* lowing list. Model C944.511571 Edger Attachment Handlebar (with clamp and knob) Clamp Base (with spacer tabs) Clamp screws (4) Attachment hanger Rex wrench Examine parts for damage. Do not use damaged parts. NOTE: If you need assistance or find parts missing or damaged, call 1-800-235-5878. ASSEMBLY _ WARNING: If received as sembled, repeat all steps to ensure your unit is properly assembled and all fasteners are secure. * A hex wrench (provided) is required for assembly. HANDLEBAR ASSEMBLY _l_ DANGER: RISK OF CUT. To avoid serious in ury, the barrier portion of the hand ebar must be nsta ed as shown on the upper tube of the powerhead to provide a barrier between operator and the spinning blade. Attach tube clamp above arrow on safedtywarning decal on the upper tube powerhead end of unit). Ensure han lebar is positioned on handlebar clamp between the arrows on the handlebar decal. NOTE: The tube clamp base has four spacer tabs attached. These tabs are provided to adapt this attachment for use with powerheads that have a 1" diameter upper tube (the tube clamp will not tighten down securely on the 1" diameter upper tube without using these spacer tabs). The tabs must be broken off completely before use and placed over the screw holes on the clamp base. These tabs are not needed for powerheads with a 7/8" upper tube. HANDLEBAR CLAMP BASE Spacer T._ =4_lb.,_ Spacer Tabs _ _,P posi!ioned foruse- upper tube _I 1. Place the tube clamp over the upper tube above the arrow on the safety decal. 2. Position the clamp base under the upper tube and align the tube clamp and clamp base screw holes (use spacer tabs between tube clamp and clamp base if necessary to secure clamp, i.e. for 1" diameter upper tube). Handlebar POWERHEAD END Handlebar Clamp between arrows on handlebar decal Knob SCOWS Arrow on Safety Decal ATTACHMENT END 3. Insert the four screws into the screw holes. 4. Secure tube clamp by tightening screws with the hex wrench. 5. Position the handlebar as shown, ensuring the handlebar is positioned on the handlebar clamp between the arrows on the handlebar decal. 6. Retighten handlebar by turning clamp knob clockwise until handlebar is secure and stationary in clamp (clamp knob cannot be overtightened). 6 KNOW YOUR EDGER ATTACHMENT READ THIS INSTRUCTIONMANUALAND SAFETY RULES BEFOREOPERATINGYOUR EDGER ATTACHMEN. Compare t...