Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
Make sure stabilizer bar is properly in place before starting any work on tractor. • Read and understand all safety and operating instructions before using the tractor lift. Never allow anyone unfamiliar with these instructions to use the tractor lift. • Read and understand all safety and operating instructions provided by the tractor's manufacturer before using tractor lift. • Never lay under the tractor or mowing deck. • When using lift, keep all bystanders, including children, away. • This tractor lift must be only used for lifting and lowering to and from a level and stable surface. • Never use in wet conditions. • Do not attempt to lift the front and back of the tractor at the same • Do not use tractor lift as an automotive lift, or for any other use for whist is not intended or designed. • If tractor lift is bowing while lifting or lowering your tractor, which indicates an overload condition, remove the tractor immediately. • Do not attempt to lift or lower any power equipment while motor is running. • Never engage blades while using tractor lift. • Always disconnect spark plug wire from tractor before beginning any work on tractor. • Do not exceed the rated capacity of the tractor lift -270#. • Failure to follow these warnings may result in property damage and/or serious bodily injury. • Be sure to read and follow all safety instructions and warnings. Failure to follow these instructions may result in damage to the product and/or serious personal injury. • Danger of serious personal injury exists. Serious personal injury can occur when using a lifting device. • Never attempt to ride any vehicle up or down the tractor lift. • Do not climb onto tractor while tractor is in the elevated position. • When working on the front of the tractor always place wheel chocks in back of the rear wheels/tires. • Always raise and lower tractor lift in a controlled fashion; do not allow the tractor to drop too quickly, damage could occur. • Make sure lifting arms are aligned and set to the proper distance apart so that the equipment being loaded is well balanced on the lift. • Do not remove warning decals from product. • Before each use, always check for any worn, loose, or damaged parts on the tractor lift. If any damage is present, DO NOT USE THE TRACTOR LIFT. • Periodically check the fasteners to make sure they are still tight and in place. • Keep lift surface clean by occasionally cleaning with water and any mild detergent. • Do not add to or try to modify the tractor lift in any way. Any modifications will void any warranties. • Failure to abide by the warnings and read the safety instructions may result in loss of load, damage to lift and/or property, serious personal and/or fatal injury. FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 2. Carton Contents ;:.C_L&C:.C,:_ .............. 6-...% REF NO QTY PART NUMBER DESCRIPTION 1 1 51001 Angle Frame Assembly 2 1 51002 Handle Top 3 1 51003 Handle Bottom 4 2 41009 Lift Tube Assembly 6 1 51005 Lift Cross Tube OPERATION Tractor Lift can be used out of the box on all Craftsman tractors with bumpers or brush guards. Tractor Lift mounting hardware is provided if your tractor does not have a bumper or brush guard. TOOLS REQUIRED FOR ASSEMBLY 9/16" Wrench and/or Socket Adjustable wrench 1 lO REF NO QTY PART NUMBER DESCRIPTION 7L 1 410131 Tractor Mounting Bar -Left 7R 1 410132 Tractor Mounting Bar-Right 8 1 51006 Stabilizer Bar 10 1 310031 Hardware Bag 11 1 310041 Assembly Manual MAINTENANCE Store unit in a clean dry place. Recommended tire pressure -30 PSI. Before each use: • Always check tire pressure. • Always inspect unit for damage. • Always check fasteners for tightness. FOR MISSING PARTS, Call 1-800-652-2321, Monday -Friday, 8 a.m. -5 p.m.E.S.T. Page 3. Hardware Contents f r-' -iiliiliiliiliiliiliiliiliililil c,__ 34 38 @ 37 35 / m 29 23 27 m _-I 39 33 36 25 m m m m 22 26 24 28 REF NO QTY PART NUMBER DESORIPTION REF NO QTY PARTNUMBER DESCR IPTION 22 3 310051 3/8"-16 x 2-3/4" Hex Bolt 29 6 310055 3/8"-16 x 1-1/4" Hex Bolt 23 6 310072 3/8" Split Lock Washer 33 1 310053 318"-16 x 2-1/4" Hex Bolt 24 8 310073 3/8" USS Flat Washer 34 4 310052 1/4"-20 x 1" Hex Bolt 25 6 310062 3/8"-16 H ex Nut 35 4 310065 1/4"-20 l'./Iok Hex Nut 26 2 300082 Hair Pin Cotter .148 D ia. 36 4 310075 1/4" USS Flat Washer 27 4 310061 3/8"-16 l',,_ylokHex Nut 37 2 310182 Vinyl Handle Grip 28 2 310054 3/8"-16 x 1-1/2" Self-thread Bolt 38 4 310221 Tube Plug RT8-1 39 1 31026 Scuff Pad FOR MISSING PARTS, Cattl-800-652-2321, Monday-Friday, 8 a.m.-5 p.m.E.S.T. Page 4. Setting up Lift Mounting Hardware -Tractor Front Tractor Lift can be used out of the box on all Craftsman tractors with bumpers or brush guards. Tractor Lift mounting hardware is provided. If your tractor does not have a bumper or brush guard, follow the steps below: Note: Left and Right sides are determined by standing behind tractor looking forward. 7R Remove, add washer (24), Step 1. replace. Step , Remov...