Assessments - 3, GPA: 3.3
(
)
)
|
Facilidade de uso
Hood installation notes: See Figure 4.8. NOTE: Use this procedure for more extensive repairs. Typical reasons may include dash panel removal, or the need for more working room than simply removing the hood will provide. 4.1. Remove the battery: See Figure 4.1. Figure 4.1 • Disconnect the negative battery cable (black) first, using a 7/16” wrench. • Disconnect the positive battery cable (red) using a 7/16” wrench. • Remove the battery hold-down. • Lift the battery from the tractor. 4.2. Disconnect the headlight harness. (Plug secured to the hood lift cylinder). 4.3. Support the hood with an improvised prop-rod to prevent damage. 4.4. Remove screws holding hinge support bar to dash support using a 1/2” wrench. 4.5. Disconnect and remove the hood lift cylinders using a small straight-blade screwdriver. 4.6. Remove screws & flat washers holding hinge support bar to dash panel using a 3/8” wrench. 4.7. Lift hood and hinge assembly off of the tractor, and remove it to a safe place. Figure 4.8 Position the hinge support bar over the two spacers that partially cover the threads of the balls that the that hood support struts attach to. The slots in the ends of the bar will fit over the spacers. Support the hood with an improvised prop rod. Install the screws that hold the hinge support bar to the dash support and instrument panel. Snap the hood support cylinder into place, and remove the prop rod. The remainder of the installation process is simply the reversal of the removal steps. 6...
Este manual também é adequado para os modelos :Cortadores de grama - 1500 Series (97.03 kb)
Cortadores de grama - 1000 (97.03 kb)