Assessments - 5, GPA: 4.2 ( )

Fabricante : Bush Hog Arquivo Tamanho: 2.97 mb Arquivo Nome : edf88f06-0c9b-4f47-99cf-9a197bc21d55.pdf Língua de Ensino:

Caution! VAlways read the operating instructions before using your Turbotrimmer. Danger! Risk of electric shock! VKeep your Turbotrimmer away from water and rain! Danger! Risk of injury to other people! VKeep other people out of the area where you are working. Danger! Tool does not stop immediately when turned off! VKeep your hands and feet out of the area where you are working until the cutting filament is stationary! Danger! Risk of injury to eyes! VAlways wear eye pro tection! 9 Filament feed (Tip mechanism Risk of injury! for automatic filament feed) : 11 GB 10 GB Connecting the Turbotrimmer: Setting the Turbotrimmer to the working position: 1. Push the extension cable 1 into the cable lock 2 on the handle 3. 2. Plug the plug 4 of the Turbotrimmer into the socket 5 of the extension cable. Working position: Position the additional handle 6 so that the cutting head 7 is tilted slightly forward when you hold the Turbotrimmer in the working position. 1. Unscrew the tightening nut 8, move the additional handle 6 to the correct position and tighten the nut 8 by hand. 2. Unscrew the adjusting nut 9, set the additional handle 6 to the correct angle and tighten the adjusting nut 9 by hand. 3. Unscrew the tightening nut 0, adjust the handle A to the correct length and tighten the nut 0 by hand. 4. Press and hold down the adjusting button B, set the cutting head 7 to the correct angle, then release the adjusting button B. 1. Press the start button C on the handle 3. The Turbotrimmer starts. 2. Release the start button C on the handle 3. The Turbotrimmer switches off. 1. For vertical cutting, loosen the tightening nut 8, turn the additional handle 6 180° and then tighten the nut 8 again by hand. 2. Swivel the plant guard D backwards to the park position until it clicks into place. 3. Lift the Turbotrimmer by the handle 3 and additional handle 6 and turn to the cutting position. 4. When trimming between paving stones, hold the Turbotrimmer so that the cutting filament moves slightly above the paved ground. The filament is lengthened automatically when the motor is running using a tip mechanism. A clean cut is only achieved with the maximum filament length. 3 2 2 1 4 5 6 7 6 B 9 8 A 0 Check your Turbotrimmer before each use v Always visually inspect your Turbotrimmer before each use. v Check that the ventilation slots are not obstructed in any way. Do not use your Turbotrimmer if the safety devices (push button, safety cover) and/ or the filament cassette are damaged or worn. v Never bypass the safety devices. v Inspect the area to be cut before you begin work. Remove any foreign objects (such as stones). Look out for foreign objects (such as stones) while you are working. v If you should come across an obstacle while cutting, turn off the Turbotrimmer. Remove the object and check the Turbotrimmer for any damage. If necessary have your Turbotrimmer repaired. Use / responsibility The Turbotrimmer can cause serious injuries. v Use the Turbotrimmer only for t...

Baixe o seu

Para fazer o download, introduza 2 dígitos :