Assessments - 1, GPA: 5
(
)
)
|
Facilidade de uso
An AV system is recommended for those persons using power tools on a regular or sustained basis. : Wear gloves and keep your hands warm. : Keep the AV system well maintained. An edger with loose components or with damaged or worn AV buffers will tend to have higher vibration levels. : Maintain a firm grip at all times, but do not squeeze the handles with constant, excessive pressures, take frequent breaks. All the above mentioned precautions do not guarantee that you will not sustain whitefinger disease or carpal tunnel syndrome. Therefore continual and regular users should monitor closely the condition of their hands and fingers. If any of the above symptoms appear, seek medical advice immediately. !Warning! The ignition system of your unit produces an electromagnetic field of a very low intensity. This field may interfere with some pacemakers. To reduce the risk of serious or fatal injury, persons with pacemaker should consult their physician and the pacemaker manufacturer before operating this tool. Proper Clothing !Warning! Edger operation can cause serious injury to eyes, ears and person. The deflector and skirt provided with your edger may not protect the operator from all foreign objects (gravel, glass, wire, etc.) thrown by the rotating cutting attachment. Thrown objects may also ricochet and strike the operator. To reduce the risk of injury to your eyes never operate an edger unless wearing goggles or properly fitted safety glasses with adequate top and side protection complying with ANSI Z 87.1 (or your applicable national standard). To reduce the risk of injury to your face STIHL recommends that you also wear a face shield or face screen over your goggles or safety glasses. FC 95 English / USA !Warning! Edger noise may damage your hearing. Wear sound barriers (ear plugs or ear mufflers) to protect your hearing. Continual and regular users should have their hearing checked regularly. Wear proper protective clothing. Protect your hands with gloves when handling the edger and the cutting tool. Heavy-duty, nonslip gloves improve your grip and protect your hands. Clothing must be sturdy and snug-fitting, but allow complete freedom of movement. Avoid loose- fitting jackets, scarfs, neckties, jewelry, flared or cuffed pants, unconfined long hair or anything that could become caught on branches, brush or moving parts of the unit. Wear long pants made of heavy material to protect your legs. Do not wear shorts. Good footing is most important in edger work. Wear sturdy boots with nonslip soles. Do not operate edger when barefoot or wearing open sandals. Steel-toed safety boots are recommended. Wear an approved safety hard hat to reduce the risk of injury to your head when there is a danger of head injuries. THE EDGER For illustrations and definitions of the edger parts see the chapter on “Parts and Controls“! !Warning! Never modify an edger in any way. Only attachments supplied by STIHL or expressly approved by STIHL for use with the specific STIHL edger models are authorized. Although certain unauthorized attachments are useable for the STIHL edger, their use may, in fact, be extremely dangerous. THE USE OF THE EDGER Transporting the edger !Warning! Always turn off the engine and make sure the cutting attachment has stopped before putting an edger down. When transporting your edger in a vehicle, properly secure it to prevent turnover, fuel spillage and damage to the edger. FC 95 English / USA 245BA002 KN Preparation for the use of the edger Adjust carrying harness and hand grip to suit your size before starting work. The machine should be properly balanced as specified in your owner's manual for proper control and less fatigue in operation. Always check your edger for proper condition and operation before starting, particularly the throttle trigger, throttle trigger interlock (and if applicable, stop switch, cutting tool, deflector and harness). An arrow on the deflector shows the correct direction of rotation of the cutting blade. The arrow on the deflector must always face away from you, so that cuttings and other dedris will be diverted away from the machine and your position (see chapter "Operating Instructions"). The throttle trigger must move freely and always spring back to the idle position. The cutting tool must be properly tightened and in safe operating condition. Inspect for loose parts (nuts, screws, etc.) and for cracked, bent, warped or damaged blades. Fueling Your STIHL edger uses an oil-gasoline mixture for fuel (see the chapter on “Fuel“ of your owner's manual). !Warning! Gasoline is an extremely flammable fuel. If spilled or ignited by a spark or other ignition source, it can cause fire and serious burn injury or property damage. Use extreme caution when handling gasoline or fuel mix. Do not smoke or bring any fire or flame near the fuel. Fueling Instructions Fuel your edger in well-ventilated areas, outdoors. Use a fuel container acceptable for the purpose. !Warning! Never attempt to fu...