Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
10/2000 TP 400-2392-00-AT-SMA Attachment Illustrated Parts List © Copyright 2000 Simplicity Manufacturing, Inc.All Rights Reserved. MANUFACTURING, INC. 500 N Spring Street / PO Box 997 Port Washington, WI 53074-0997 USA Hitch 42” Blade NOTE: Unless noted otherwise, 985750 use the standard hardware torque specification chart. Top of RH Footrest Replaces #11 when using snow cabs. Secure to cross bar above hood. 2 1 3 5 6 7 40 8 8 4 4 3 8 22 21 25 19 24 23 8 20 37 38 30 34 35 31 32 39 8 36 19 28 19 33 27 21 28 34 109 13 11 12 14 16 13 15 18 13 17 26 19 29 The above parts group applies to the following Mfg. Nos.: 1693755 Hitch 42” Blade © Copyright 2000 Simplicity Manufacturing, Inc. All Rights Reserved. 2 TP-400-2392-00-AT-SMA Hitch 42” Blade REF NO. PART NO. QTY. DESCRIPTION 1 1709813 2 BAR 2 1960373 2 CAPSCREW, Taptite, 5/16-18 x 1 3 1928721 2 SCREW, Set, 5/16-18 x 1/2 4 8031007 2 COLLAR 5 171679 1 GUIDE ASSEMBLY 6 171011 1 SPRING 7 1665887 1 ROD 8 1960033 5 HAIR PIN 9 172162 1 EYEBOLT 10 1920397 1 LOCKNUT, Hex, 1/4-20 11 1721057 1 BRACKET, Control Rod 12 1960223 2 CARRIAGE BOLT, 5/16-18 x 1-1/4 13 1919326 4 WASHER, 5/16 14 1923362 2 NUT, Centerlock, 5/16-18 15 1917372 1 NUT, Hex, 5/16-18 16 1917356 1 LOCKWASHER, 5/16 17 1921221 2 CAPSCREW, Hex Head, 5/16-18 x 1-1/2 18 1721278 1 BRACKET, Control Rod (Used With Snow Cab) 19 176012 5 RETAINER, Pin 20 1928352 1 NUT, Whizlock, 3/8-16 21 1911386 2 WASHER 22 1707455 1 SUPPORT ASSEMBLY 23 3299100 1 SPACER 24 108717 1 SPACER 25 960361 1 CAPSCREW, Hex Head, 5/16-18 x 2 26 105249 1 PIN, Round Head, Drilled 27 1704703 1 PUSH BAR ASSEMBLY 28 1715757 2 STOP 29 1715758 1 ROD 30 1919381 2 WASHER, 5/16 31 1715012 1 BRACKET 32 1655651 1 PIN 33 1921176 1 CAPSCREW, Hex Head, 1/2-13 x 1-1/4 34 156306 2 PIN 35 1916966 1 LOCKWASHER, 1/2 36 1916951 1 NUT, Hex, 1/2-13 37 1669241 1 CHAIN 38 1675232 1 SPRING 39 1721045 1 PUSH BAR ASSEMBLY 40 1603602 1 PIN Footnotes: The above parts group applies to the following Mfg. Nos.: 1693755 Hitch 42” Blade TP-400-2392-00-AT-SMA 3 Hardware Identification & Torque Specifications Common Hardware Types Hex Head Capscrew Washer Lockwasher Carriage Bolt Hex Nut Standard Hardware Sizing When a washer or nut is identified as 1/2” , this is the Nominal size, meaning the inside diameteris 1/2 inch; if a second number is present it represent the threads per inch When bolt or capscrew is identified as 1/2 - 16 x 2” , this means the Nominal size, or body diameteris 1/2 inch; the second number represents the threads per inch(16 in this example, and the final number is the body lengthof the bolt or screw (in this example 2 inches long). The guides and ruler furnished below are designed to help you select the appropriate hardware and tools. Nut, 1/2” Inside Diameter 01234 1/2 1/2 1/2 1/2 1/4 3/4 1/4 3/4 1/4 3/4 1/4 3/4 Screw, 1/2 x 2 Body Diameter Body Length Wrench & Fastener Size Guide 1/4 5/16 Torque Specification Chart FOR STANDARD MACHINE HARDWARE (Tolerance ± 20%) Hardware Grade SAE Grade 2 No Marks SAE Grade 5 SAE Grade 8 Size Of in/lbs in/lbs in/lbs Hardware ft/lbs Nm. ft/lbs Nm. ft/lbs Nm. 8-32 19 2.1 30 3.4 41 4.6 8-36 20 2.3 31 3.5 43 4.9 10-24 27 3.1 43 4.9 60 6.8 10-32 31 3.5 49 5.5 68 7.7 1/4-20 66 7.6 8 10.9 12 16.3 1/4-28 76 8.6 10 13.6 14 19.0 5/16-18 11 15.0 17 23.1 25 34.0 5/16-24 12 16.3 19 25.8 27 34.0 3/8-16 20 27.2 30 40.8 45 61.2 3/8-24 23 31.3 35 47.6 50 68.0 7/16-14 30 40.8 50 68.0 70 95.2 7/16-20 35 47.6 55 74.8 80 108.8 1/2-13 50 68.0 75 102.0 110 149.6 1/2-20 55 74.8 90 122.4 120 163.2 9/16-12 65 88.4 110 149.6 150 204.0 9/16-18 75 102.0 120 163.2 170 231.2 5/8-11 90 122.4 150 204.0 220 299.2 5/8-18 100 136 180 244.8 240 326.4 3/4-10 160 217.6 260 353.6 386 525.0 3/4-16 180 244.8 300 408.0 420 571.2 7/8-9 140 190.4 400 544.0 600 816.0 7/8-14 155 210.8 440 598.4 660 897.6 1-8 220 299.2 580 788.8 900 1,244.0 1-12 240 326.4 640 870.4 1,000 1,360.0 NOTES 1. These torque values are to be used for all hardware excluding: locknuts, self-tapping screws, thread forming screws, sheet metal screws and socket head setscrews. 2. Recommended seating torque values for locknuts: a. for prevailing torque locknuts - use 65% of grade 5 torques. b. for flange whizlock nuts and screws - use 135% of grade 5 torques. 3. Unless otherwise noted on assembly drawings, all torque values must meet this specification. 3/8 1/2 DIA. 7/16 DIA. 1/4” Bolt or Nut 5/16” Bolt or Nut 3/8” Bolt or Nut 7/16” Bolt or Nut 1/2” Bolt or Nut Wrench—7/16” Wrench—1/2” Wrench—9/16” Wrench (Bolt...