Assessments - 3, GPA: 3.7 ( )

Fabricante : Bolens Arquivo Tamanho: 809.13 kb Arquivo Nome : F8208301en.pdf Língua de Ensino:

(149 mm) 6.03 in. (153 mm) 6.27 in. (159 mm) 7.15 in. (182 mm) F 8.82 in. (224 mm) 8.82.in. (224 mm) 8.82.in. (224 mm) 8.82.in. (224 mm) 8.82 in. (224 mm) G 15.10 in. (384 mm) 15.19 in. (386 mm) 15.15 in. (385 mm) 19.85 in. (504 mm) 21.62 in. (549 mm) H 15.6 in. (396 mm) 15.6 in. (396 mm) 15.65 in. (398 mm) 20.35 in. (517 mm) 26.12 in. (663 mm) I 1.58 in. (40 mm) 1.18 in. (30 mm) 1.47 in. (37 mm) 1.34 in. (34 mm) 0.97 in. (25 mm) J 30.21 in. (767 mm) 34.57 in. (878 mm) 39.72 in. (1009 mm) 42.54 in. (1081 mm) 51.5 in. (1308 mm) K 25.5 in. (648 mm) 30.42 in. (773 mm) 35.28 in. (896 mm) 38.23 in. (971 mm) 47.52 in (1207 mm). L 23.01 in. (584 mm) 24 in. (610 mm) 26 in. (660 mm) 26.38 in. (670 mm) 30.91 in. (785 mm) M 17 in. (432 mm) 17 in. (432 mm) 17.74 in. (451 mm) 18.12 in. (460 mm) 20.77 in. (528 mm) N 14.38 in. (365 mm) 14 in. (356 mm) 14.56 in. (370 mm) 14.94 in. (379 mm) 17.91 in. (455 mm) O 26 in. (660 mm) 29 in. (737 mm) 30.63 in. (778 mm) 34.06 in. (865 mm) 41.5 in. (1054 mm) P 1.5 in. (38 mm) 1.5 in. (38 mm) 1.5 in. (38 mm) 1.5 in. (38 mm) 1.5 in. (38 mm) Q 42 in. (1067 mm) 44.95 in. (1142 mm) 47.20 in. (1199 mm) 49.89 in. (1267 mm) 56.16 in. (1426 mm) R 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) 9 in. (229 mm) F8208301 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Specifications and Dimensions CHM2279N 1 Dry Chemical Dispenser (Optional) 6 Hot Water Inlet 2 Input Power Block Compartment 7 Liquid Chemical Inlet 3 Fans 8 Steam Inlet (Optional) 4 Valve Panel 9 Drain Outlet 5 Cold Water Inlet P 6 1 4 7 A B C D E F O 5 125 POUND CAPACITY MACHINES 82 3 QH G N J K L M 9 I Figure 4 Machine Capacity Dimensions for 125 Pound Models through 1/31/11 A 78.8 in. (2002 mm) J 61.28 in. (1557 mm) B 14.62 in. (371 mm) K 70.81 in. (1799 mm) C 6.27 in. (159 mm) L 50.2 in. (1275 mm) D 29.56 in. (751 mm) M 38.96 in. (990 mm) E 41.28 in. (1049 mm) N 35.74 in. (908 mm) F 51.26 in. (1302 mm) O 60 in. (1524 mm) G 75.15 in. (1909 mm) P 9.92 in (252 mm) H 83.4 in. (2118 mm) Q 88.09 in. (2237 mm) I 2.86 in. (73 mm) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208301 Specifications and Dimensions CHM2345N 1 Dry Chemical Dispenser (Optional on OPL 5 Cold Water Inlet Models) 6 Hot Water Inlet 2 Input Power Block Compartment 7 Liquid Chemical Inlet 3 Fans 8 Steam Inlet (Optional) 4 Valve Panel 9 Drain Outlet P 6 1 4 7 A B C D E F O 5 125 POUND CAPACITY MACHINES 82 3 QH G N J K L M 9 I Figure 5 Machine Capacity Dimensions for 125 Pound Models starting 2/1/11 A 63.04 in. (1601 mm) J 49.02 in. (1245 mm) B 11.69 in. (297 mm) K 56.06 in. (1424 mm) C 5.01 in. (127 mm) L 40.16 in. (1020 mm) D 23.65 in. (601 mm) M 30.16 in. (766 mm) E 33.03 in. (839 mm) N 28.28 in. (718 mm) F 39.28 in. (998 mm) O 48 in. (1219 mm) G 60.21 in. (1529 mm) P 7.94 in (202 mm) H 65.77 in. (1671 mm) Q 70.47 in. (1790 mm) I 2.29 in. (58 mm) F8208301 © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT Specifications and Dimensions Dimensional Clearances CHM2280N CHM2280N A B C FRONT Figure 6 Machine Capacity Dimensional Clearances Dimensions 20 30 40 60 80 125 A 2 in. (51 mm) 2 in. (51 mm) 2 in. (51 mm) 2 in. (51 mm) 6 in. (152 mm) 24 in. (600 mm) B .5 in. (12.5 mm) .5 in. (12.5 mm) .5 in. (12.5 mm) .5 in. (12.5 mm) .5 in. (12.5 mm) .5 in. (12.5 mm) C Recommended 24 in. (610 mm) 24 in. (610 mm) 24 in. (610 mm) 24 in. (610 mm) 24 in. (610 mm) 36 in. (914 mm) Minimum 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 12 in. (305 mm) 18 in. (457 mm) 24 in. (610 mm) © Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT F8208301 Installation Machine Foundation NOTE: Do not mount on wooden floors, tile floors, above ground level, or over basements or crawl spaces because of the high extract speed and the G-forces exerted. Thoroughness of detail must be stressed with all foundation work to ensure a stable unit installation, eliminating possibilities of excessive vibration during the extract cycle. The floor and foundation must be minimum 4000 psi reinforced concrete set firmly in clean, compacted fill dirt. The machine must be anchored to a smooth, level surface so that the entire base of the machine is supported and rests on the mounting surface. (Do not support the machine on only four points.) Grouting is required. An elevated foundation must not exceed 8 inches (203 mm). Refer to Table 1 for foundation and anchoring requirements. Machine Foundation Requirements Models Foundation Thickness (minimum) MountingBolt depth Installation Foundation Method(s) Anchoring Method(s) Requirement* Anchoring Bolt Diameter Size (minimum) 2 Speed and F-Speed (20-60 Models) 4 in. (102 mm) 2.75 in. (70 mm) Direct-to-floor, elevated base frame, or concrete foundation Expansion bolt or Epoxy bolt 5/8 in. Variable-Speed (20-60 Models) 6 in. (152 mm) 2.75 in. (70 mm) Direct-to-floor, elevated base frame or concrete foundation Epoxy bolt 5/8 in. Variable- Speed 80 Models 9 in. (229 mm) 3.25 in. (83 mm) D...

Baixe o seu

Para fazer o download, introduza 2 dígitos :