Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
The network can accept up to 250 separate cameras - or other controlled devices - at distances up to 5000 feet without expansion modules. This unique camera control network also allows the option of additional or alternative controllers, such as Crestron touchpanels, PC-based control software, and button panel consolettes. When included in a camera control network with proper programming, the CPC-2000A permits control of camera pan/tilt and lens zoom/focus with speed adjustments. Presets that store the pan/tilt/zoom/focus positions are allowed. Software The CPC-2000A has one 256-color palette. Therefore, all custom colors are mapped to the nearest color in that palette, such that colors from the custom color dialog box may not be exactly represented. If the precise shade is not immediately achieved, the solution is to experiment with a slightly different color from the custom color dialog box in VT Pro-e. VisionTools™ Pro-e (VT Pro-e), a Windows.-based design software, permits the creation of unlimited control screen variations incorporating two and threedimensional graphics and text. A set of pages which make up a project can be designed for each CPC-2000A application. Each page contains objects such as custom control graphics, two and three-dimensional buttons, sliders, and digital readouts which allow the user to interface with the control system. The project is uploaded to the touchpanel and programmed into the flash PROM. The touchpanel uses the programmed project until another set is uploaded from the PC. The PC may be disconnected from the rack or panel, except during reprogramming. VT Pro-e also allows users the option to generate projects destined for web browsers rather than for physical touchpanels. For additional software information, consult the VT Pro-e help file. Physical Description The 5.7 inch (14.5 cm) touch sensitive viewing screen is located on the large angled portion of the top face of the CPC-2000A. The touchscreen is identical to the Crestron CT-1600 with respect to programming and configuration. The electronic hardware is housed in a black metal enclosure with silk-screened labels, shown below. Four speed adjustment knobs are located below the touchsceen area. Two joysticks are located on the horizontally level area of the top face. A RJ-type network connector is available from the back panel of the unit. There are four rubber feet on the base of the unit for stability and to prevent slippage. CPC-2000A Physical Views TOP FACE 10.07 in (25.59 cm) SIDE VIEW 9.00 in (22.86 cm) 4.09 in BACK PANEL (10.40 cm) Sensitivity Adjustment Knobs Four sensitivity adjustment knobs, located beneath the touchscreen, are used to regulate pan, tilt, focus, and zoom speeds. Turning the knobs clockwise maximizes the speed. Speed can be adjusted while using the joysticks. The knobs are panel mounted single-turn potentiometers. Joysticks Two 2-axis, spring centering joysticks, located beneath the sensitivity adjustment knobs, are used to control pan, tilt, focus, and zoom movement of a network camera/lens assembly. Vertical movement of the right-most joystick (when viewing the touchscreen) tilts the head. Horizontal movement of the right-most joystick pans the head. Vertical movement of the left-most joystick zooms the lens. Horizontal movement of the left-most joystick focuses the lens. Network Connector This 6-pin, 6-position RJ11 modular jack, located on the back panel of the CPC-2000A, is used to receive power and to communicate with the control system. Use the cable assembly (supplied) to connect the CPC-2000A to the CN-RJ11 (supplied) and, in turn, connect the CN-RJ11 to the control system per the latest revision of the network interconnection diagram (Doc. 5411). If connecting the CPC-2000A to a CNX-series control system, the CN-RJ11 is not required. Make connections per the latest revision of the modular cable requirements (Doc. 5682). Leading Specifications The two tables, shown after this paragraph, provides a summary of leading specifications for the CPC-2000A and joystick particulars. Dimensions and weight are rounded to the nearest hundredth unit. Leading Specifications of the CPC-2000A SPECIFICATION DETAILS Power Requirements 12 Watts, 24 VDC 0.5 Amp Default Network ID 03 (touchpanel) & 30H (joystick) SIMPL™ Windows® Version 1.22 or later* CNX Operating System Version 5.01.09x or later CNX Monitor Version 2.00 or later CNMS, CNRACK, CNLCOMP Version 3.16.08 or later Operating System ST-CP Operating System Version 4.00.29 or later ST-CP Monitor Version 1.29 or later VisionTools™ Pro Version 1.2.1 or later* Crestron Database Version 11.7.209 or later* Memory 768 Kbytes flash memory for display Dimensions Height: 4.09 in (10.40 cm) Width: 9.00 in (22.86 cm) Depth: 10.07 in (25.59 cm) Weight (without CN-RJ11) 3.60 lb (1.63 Kg) * The latest software versions can be obtained from the Downloads page (SIMPLWIN, TOUCHPNL, and CRESDB Libraries) on the Crestron website (New users are...