Assessments - , GPA:
(
)
)
Fabricante : Radio Shack
Arquivo Tamanho: 110.46 kb
Arquivo Nome : 6001192_PM_EN.pdf
Língua de Ensino: 
O documento está colocado, por favor, espere
 |
O documento está colocado, por favor, espere
Facilidade de uso
60-1192 Your RadioShack Robot Lazer Battle game lets you enjoy the excitement of laser tag using two infrared remote controlled robots. It’s great fun for players age 5 and up. In the game, the robots Chaos and Disabler engage in a fierce battle to disable each other. Use the infrared controller from up to 20 feet away to move your robot and fire his laser gun at the rival robot’s chest. A robot loses 25% of his power each time he is hit in the chest. When a robot receives four hits, he is disabled and the game is over. INSTALLING BATTERIES You need a total of 14 AA batteries (not supplied) — four in each robot and three in each controller. For the best operation, we recommend RadioShack alkaline batteries. Cautions: • Use only fresh batteries of the required size and recommended type. • Do not mix old and new batteries, different types of batteries (standard, alkaline, or rechargeable), or rechargeable batteries of different capacities. • Never leave dead or weak batteries in the robots and controllers. Warning: Dispose of old batteries promptly and pr operly. Do not bury or burn them. Note: If you do not plan to play with the robots for a week or more, remove the batteries. In the Robots 1. Slide ON/OFF to OFF. 2. Use a Phillips screwdriver to loosen the battery compartment cover screw, then lift and remove the cover. 3. Install the batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside. 4. Replace the cover and tighten the screw. When the robot moves slowly or not at all, replace the batteries. © 1999 Tandy Corporation. All Rights Reserved. RadioShack is a registered trademark used by Tandy Corporation. 60-1192.fm Page 2 Friday, July 9, 1999 3:27 PM In the Controllers 1. Use a Phillips screwdriver to loosen the battery compartment cover screw. Then lift and remove the cover. 2. Install the batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside. 3. Replace the cover and tighten the screw. When the controller’s range decreases, replace the batteries. MOVING THE ROBOTS To turn on a robot, slide ON/OFF on the back of the robot to ON. The robot’s eyes light, he says “Power up,” and announces his name. Then the four power indicators on his chest light. Press the reset button on the robot’s head to verify that all four power indicators are on. Use the red controller for the red robot and the green controller for the green robot. The controller’s buttons move the robot as follows: Left Control Forward Backward Forward Backward Right Contol Forward — Press both the left and right forward control buttons together. Backward — Press both the left and right backward control buttons together. Left Turn — Press the right forward control button. Right Turn — Press the left forward control button. Rotate Clockwise — Press both the left forward and right backward control buttons together. Rotate Counterclockwise — Press both the right forward and left backward control buttons together. Notes: • Keep the robot within 15 to 20 feet of the controller. • Make sure there are no obstructions between the robot and the controller. 2 60-1192.fm Page 3 Friday, July 9, 1999 3:27 PM PLAYING ROBOT LAZER BATTLE You must move the robot to shoot the other robot and win the game. To shoot the other robot, press either one of the shooting buttons on the front of the controller. Fire the laser gun when the other robot’s chest is in front of your robot. When a robot is hit in the chest, an explosion sounds. His chest and eyes light and his power indicator flashes. Then the robot turns around and announces how much power remains. One of his power indicators turns off, showing he has lost 25% of his power. When a robot loses all his power, the lights in his eyes turn off, all four power indicators flash, and the robot does not respond to the controller. RESETTING THE ROBOT To reset the “dead” robot, press the reset button on the robot’s head. The robot comes back to life, announces his name, and the four power indicators light. When you finish playing, slide ON/OFF to OFF. CARE To enjoy Robot Lazer Battle for many battles to come: • Keep the robots and controllers dry. • Use and store the robots and controllers only in normal temperature environments. • Handle the robots and controllers gently and carefully. • Keep the robots and controllers away from dust and dirt. • Wipe the robots and controllers with a damp cloth occasionally to keep them looking new. Modifying or tampering with the robot and controller’s internal components can cause a malfunction and might invalidate its warranty. If a robot or controller does not perform as it should, take both sets to your local RadioShack store for assistance. 3 60-1192.fm Page 4 Friday, July 9, 1999 3:27 PM THE FCC WANTS YOU TO KNOW This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference rec...