Assessments - 1, GPA: 3
(
)
)
|
Facilidade de uso
The Enable VIN Mode command toggles the VIN mode on and off. When a check box displays next to the Enable VIN Mode command, the VIN recording capabilities on the CarChip data logger are turned on. If a check box does not display, the CarChip data logger alarm has been turned off. Note: The Enable VIN Mode command is not available for the serial versions (# 8210, 8220) of CarChip. To toggle the CarChip VIN Mode on and off: 1. Select Enable VIN Mode from the CarChip menu. The CarChip software takes a moment to initialize the VIN setting. The CarChip VIN mode is now on and will record the VIN information on a vehicle the next time it is connected to a vehicle. 2. Select Enable VIN Mode a second time. The CarChip software take a moment to initialize the VIN setting. The CarChip VIN mode is now off. To view CarChip VIN status: 1. View Enable VIN Mode from the CarChip menu. If a check displays next to the command, the CarChip VIN Mode has been enabled on the CarChip data logger. If a check does not display, the CarChip VIN Mode is turned off. Back to CarChip Menu Home | File | Setup | CarChip | Tools | View | Help | Shortcuts Set Speed Bands Set Speed Bands Use the Set Speed Bands dialog box to enter the threshold speeds for the CarChip data logger. The threshold speeds help you identify how much time is spent in each speed band. The time spent in each band shows up on the Trip Report and the thresholds are displayed as horizontal dotted lines in the Trip Speed Plot. To set speed bands: 1. Select Set Speed Bands... from the CarChip menu. The CarChip / Set Speed Bands dialog box displays. 2. Enter the maximum threshold speed for each of the first three speed bands. The fourth speed band consists of all speeds greater than the last threshold, or click Default to use the software default threshold settings. 3. Click OK to save the new speed band settings. Click Cancel to exit the dialog box without saving changes to the settings. Note: The speed threshold displayed in the fourth speed band is also the threshold that triggers the audible alarm in the CarChip Pro, CarChip Fleet Pro, CarChip E/X with Alarm, and CarChip Fleet with Alarm models. When this speed band is exceeded in a vehicle, the alarm sounds until the vehicle is no longer over the speed band threshold. See Enable CarChip Alarm for more information on using the CarChip Alarm feature. Back to Walkthrough - Full Setup | CarChip Menu Home | File | Setup | CarChip | Tools | View | Help | Shortcuts Speed Bands Right-Click Menu The Draw Speed Bands check box in the Setup / Plots dialog box contain a right-click menu with options regarding the options available for each check box. Using the mouse right-click when the cursor is in the Draw Speed Bands edit box displays the following menu choices: • Requirements... Ctrl+R • Errors... Ctrl+E • Unit Systems... Ctrl+U • Help F1 Home | File | Setup | CarChip | Tools | View | Help | Shortcuts Set Braking Thresholds Set Braking Thresholds Use the Set Braking Thresholds dialog box to enter the rates of deceleration that define hard braking and extreme braking. Accident Logs are created based on the thresholds set in this dialog box. Any time the car's braking threshold exceeds these set limits, the event is logged in the Trip Report. To set braking thresholds: 1. Select Set Braking Thresholds from the CarChip menu. The CarChip / Set Braking Thresholds dialog box displays. 2. Enter your desired hard and extreme braking thresholds or click Default to use the software default threshold settings. The default braking thresholds are: 0.35 and 0.50 G (US & Metric) and 3.4 and 4.9 m/s2 (S.I.). 3. Click OK to save the new settings. Click Cancel to exit the dialog box and retain the previous settings. Note: The extreme braking threshold is also the threshold that triggers the audible alarm on the CarChip Pro, CarChip Fleet Pro, CarChip E/X with Alarm, and CarChip Fleet with Alarm models. When this braking threshold is exceeded in a vehicle, the alarm sounds five times. See Enable CarChip Alarm for more information on using the CarChip Alarm feature. See Also: Hard Braking Threshold Extreme Braking Threshold Back to Walkthrough - Full Setup | CarChip Menu Home | File | Setup | CarChip | Tools | View | Help | Shortcuts Hard Braking Threshold The Hard Braking Threshold box in the Set Braking Thresholds dialog box is the lower of two braking thresholds in the CarChip Software. The default hard braking threshold for each standard measurement system is: • 0.35 G - For U.S. measurement system. • 0.35 G - For Metric measurement system. • 3.4 m/s2 - For S.I. measurement system. See Also: Extreme Braking Threshold Back to Set Braking Thresholds Home | File | Setup | CarChip | Tools | View | Help | Shortcuts Extreme Braking Threshold The Extreme Braking Threshold box in the Set Braking Thresholds dialog box is the higher of two braking thresholds in the CarChip software. The default extreme braking threshold for each standard measurement sys...
Este manual também é adequado para os modelos :As consolas de jogos - CAR CHIP 8246 (1.23 mb)
As consolas de jogos - CAR CHIP 8245 (1.23 mb)
As consolas de jogos - CAR CHIP 8241 (1.23 mb)
As consolas de jogos - CAR CHIP 8225 (1.23 mb)