Assessments - 2, GPA: 4
(
)
)
|
Facilidade de uso
26-446 8 Fire Button Digital/Analog Gamepad Your RadioShack 8 Fire Button Digital/Analog Gamepad lets you take control of the latest MS-DOSa and Windowsa computer games! The gamepad’s advanced features include: Analog/Digital Control — lets you switch between analog and digital control for different types of games. Analog control provides better response for driving and flight simulation games, while digital control provides better performance for action and fighting games. Analog Throttle — lets you easily control throttle functions in many driving and flight simulation games. Dual Triggers and 6 Control Buttons — give you the flexibility you need to play games with multiple controls. You can disable individual pairs of control buttons, letting you use an additional gamepad or joystick in some 2-player games. Analog Joystick — allows precise control in an almost infinite number of directions. Thumb-Control Pad — allows precise control in eight directions. Independent/Automatic Fire Selectors — let you fire a continuous or single high-speed blast from one button while manually controlling the others. COMPATIBILITY Hardware — Your gamepad works with IBM® and compatible PCs equipped with a joystick port, using the industry-standard 15-pin D subminiature connector. Joystick ports are also available on game cards and enhanced sound cards. Important Notes: • To take advantage of all of your gamepad’s features, you must have a game card with a single dual port installed in your computer. (A dual-port game card is designed to run two 2-button joysticks or gamepads at the same time using a Y- connector). • Make sure you have only one game card (such as a sound card or multi I/O card with a built-in game port) enabled at once. If you have multiple game cards enabled, they might conflict with one another, causing your gamepad to operate erratically. If you have a dedicated game card, you must disable your sound card’s or multi I/O card’s game port. Check your computer’s documentation or contact your computer dealer for more information, if necessary. • You must have DirectX® 5.0 or above installed on your computer to properly test the gamepad with the included driver. If necessary, you can download DirectX at Software — You can use your gamepad with any PC-compatible software that supports a gamepad. Note: The function of each of the gamepad’s buttons depends on the game you are playing. Consult your game’s owner’s manual for more information. INSTALLING THE SUPPLIED DRIVER If you are using Windows 95 or 98 and want to set up all 8 of your gamepad’s fire buttons for one player, you must install the driver from the supplied diskette. 1. Close all programs in use, then insert the supplied diskette into your computer’s floppy disk drive. 2. Set the A, B, C, D, R1/R2, and T1/T2 switches to NORMAL. 3. From the Start Menu, select Settings, then click on Control Panel. 4. Double click Add/Remove Programs. 5. Click Install, then follow the instructions that appear. © 1999 Tandy Corporation. All Rights Reserved. RadioShack is a registered trademark used by Tandy Corporation. USING THE GAMEPAD Cautions: • Always turn off your computer before connecting or disconnecting the gamepad from the game port. • When disconnecting the gamepad from the computer, hold and gently pull on the connector plug. Do not pull the cable. Your gamepad has two triggers (A and B) and six buttons (R1, R2, T1, T2, C, and D). It also has two turbo/auto firing control switches (marked A and B) which correspond to the A and B triggers, and four turbo control switches (marked R1/R2, C, D, and T1/T2) which correspond to the buttons of the same name. AUTO DIGITAL ANALOG C NORMAL TURBO TURBO NORMAL R1/R2 OFF T1/T2 THROTTLE D T1/T2 C R1 D R2 T2 T1 A THRO LEB A BR1/R2 C D T1/T2 Notes: • If you are playing a 2-player game and you get unexpected results when you press your gamepad’s buttons, try setting the C, D, T1/T2, and R1/R2 switches to OFF. Some 2-player games use these controls for the second player. • In many games, you can use the R1 and R2 buttons for rudder control and the T1 and T2 buttons for throttle control. Follow these steps to use the gamepad. 1. Turn off the computer. 2. Insert the gamepad’s connector into game port A on your computer, then turn on the computer. 3. For R1/R2, T1/T2, C, and D, set OFF/NORMAL/ TURBO to OFF (if your game does not use the button), NORMAL (for normal fire), or TURBO (for high or low-speed turbo fire when you hold down the button). For A and B, set AUTO/NORMAL/TURBO to AUTO (for automatic fire), NORMAL (for normal fire), or TURBO (for high or low- speed turbo fire when you hold down the button). Notes: • You can set the turbo speed by setting the speed selector on the back of the gamepad to 1 (high) or 2 (low). However, turbo speed works only with games that support it. If your game does not support turbo speed, set any buttons you use in the game to NORMAL. • Depending on the g...