Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Make sure the TV or other component is unplugged from the electrical outlet prior to connecting it to the system. • Any TV or component connected to the system must be functioning properly and free of defects. If a TV or component connected to the system is faulty or defective, it may cause damage to the TV or component, or to the system itself. As with all electrical products, connection to faulty or defective components, or the failure to connect to a properly wired outlet, may cause sparking and pose a fi re hazard. • The socket-outlet shall be installed near the equipment and shall be easily accessible. Connecting to a TV using an HDMI cable Connect the system to the TV using an HDMI cable (sold separately). An HDMI cable can output both video and audio and enables you to enjoy digital-quality video and audio with minimal loss of picture quality. TV HDMI IN connector HDMI cable (sold separately) HDMI OUT connector Connecting with other types of cables Connect cables other than the HDMI cable to the AV MULTI OUT connector on the system. VIDEO AUDIO L R TV VIDEO IN connector AV cable (supplied) AV MULTI OUT connector Example: When using the supplied AV cable Hint If you change the type of cable used to connect the system, video may not be displayed. If this happens, turn off the system and then turn it on again by touching the power button on the system front for at least fi ve seconds (until the system beeps twice). The video output setting will then be reset to the standard resolution. 9 US FR ES Step 2: Connect digital audio devices You can connect audio devices that support digital audio output, such as an AV receiver for home entertainment use. Hint When connecting a digital audio device to the system, go to (Settings) (Sound Settings) "Audio Output Settings", and then adjust the settings as necessary for the audio device. Audio output on the PS3™ system The supported channels may vary depending on the output connector to be used. PS3™ system output connectors Channels that can be used for output 2 Ch. 5.1 Ch. 7.1 Ch. AV MULTI OUT connector . . . Digital out (optical) connector . . . HDMI OUT connector . . . * * A device compatible with Linear PCM 7.1 Ch. is required to output 7.1 Ch. audio from the HDMI OUT connector. Connecting with an optical digital cable Audio will be output from the optical digital cable. Video will be output from the video output cable. Optical digital cable for audio (sold separately) Digital audio device such as an AV receiver TV Video output cable for the TV in use ( page 7) Hint Normally, audio cannot be output simultaneously from multiple output connectors. For example, if your PS3™ system is connected to a TV via an HDMI cable and to an audio device via an optical digital cable and “Digital Out (Optical)” is set under “Audio Output Settings”, audio will no longer be output from the TV and will only be output from the audio device. Getting started Setting up the PS3™ system 10 Getting started Setting up the PS3™ system Connecting with an HDMI cable Both audio and video will be output from the HDMI cable. You can output the TV picture via an audio device. HDMI cable (sold separately) Digital audio device such as an AV receiver HDMI cable (sold separately) TV Hints • If your TV is not equipped with an HDMI input connector, use a video output cable of the correct type for your TV ( page 7) to connect it to the PS3™ system directly. • If a device is connected to the PS3™ system via an HDMI cable, do not turn off the device while the system is turned on (power indicator is lit solid green). Doing so may cause sound distortions or produce abnormal sounds. Step 3: Connect an Ethernet cable Using a commercially available Ethernet cable, you can connect the system to the Internet. For details on network settings, see "Adjusting network settings" ( page 24). Caution The system supports 10BASE-T, 100BASE-TX and 1000BASE-T networks. Do not connect a standard telephone line or other types of cords or cables that are not compatible with the system directly to the LAN connector on the system, as this may cause heat build-up, fi re or malfunction. LAN connector Commercially available Ethernet cable LAN access indicator Hint You can connect to the Internet without using an Ethernet cable. For details, see "Using a wireless connection" ( page 25). 11 US FR ES Getting started Setting up the PS3™ system Step 4: Connect the AC power cord Connect the AC power cord. Caution • Do not plug the AC power cord for the system into an electrical outlet until you have made all other connections. • To avoid possible damage to the system or to a connected TV or component, the AC power cord must be plugged into a polarized, threeprong, electrical outlet that is properly wired and grounded. As with all electrical products, connection to faulty or defective components, or the failure to connect to a properly wired outlet, may cause sparking and pose a fi re hazard. • The socket-outlet shall be installed nea...
Este manual também é adequado para os modelos :As consolas de jogos - 80GB Playstation 3 4-117-133-41 (3.35 mb)