Assessments - 14, GPA: 3.9
(
)
)
|
Facilidade de uso
2 Using the directional buttons, select "Yes" and then press the button. The screen for entering the password is displayed. 3 Select a number, and then press the button. Repeat step 3 to enter the four-digit password. After entering the password, playback will begin again. When DVD playback is stopped, the Parental Control level returns to the original setting. Notes • If you forget your password, see "Troubleshooting" ( page 51). • If you do not set a password, you cannot change the Parental Control settings. • Some DVDs with the Parental Control feature do not allow use of playback modes ( pages 26 to 27). Setting sound options Setting sound options Audio Digital Out You can switch the method of outputting the audio signal when you connect the following audio devices to the DIGITAL OUT (OPTICAL) connector. Caution When the console is connected to an audio device without a Dolby Digital, DTS or MPEG decoder, set "Dolby Digital", "DTS" and "MPEG" to "Off". If you set these options to "On" without the necessary decoder, you may have no sound or an extremely loud noise may be emitted. Digital Out (Optical) This option sets the type of output for the DIGITAL OUT (OPTICAL) connector. On Select this option when you want sound (audio signal) to be output through the DIGITAL OUT (OPTICAL) connector. Settings for "Dolby Digital", "DTS" and "MPEG" are displayed. Off Select this option when you do not want sound to be output through the DIGITAL OUT (OPTICAL) connector. Settings for "Dolby Digital", "DTS" and "MPEG" are not displayed. Dolby Digital This option sets Dolby Digital as the output signal for the DIGITAL OUT (OPTICAL) connector. On Select this option when the console is connected to an audio device with a built-in Dolby Digital decoder. Off Select this option when the console is connected to an audio device without a built-in Dolby Digital decoder. GB DTS This option sets DTS as the output signal for the DIGITAL OUT (OPTICAL) connector. DVDs On Select this option when the console is connected to an audio device with a built-in DTS decoder. Off Select this option when the console is connected to an audio device without a built-in DTS decoder. MPEG This option sets MPEG AUDIO as the output signal for the DIGITAL OUT (OPTICAL) connector. On Select this option when the console is connected to an audio device with a built-in MPEG decoder. Off Select this option when the console is connected to an audio device without a built-in MPEG decoder. Adjusting DVD player settings 33 Audio Track Auto Select Mode This setting gives priority to the audio track that contains the highest number of channels when you play a DVD on which multiple audio formats (PCM, Dolby Digital, DTS or MPEG) are recorded. If PCM, Dolby Digital, DTS and MPEG have the same number of channels, the console selects PCM, Dolby Digital, DTS and MPEG audio tracks in that order. On Priority given Off No priority given Notes • If you set "DTS" to "Off" in "Audio Digital Out" ( page 33), the DTS audio track is not played. • Depending on the DVD, the audio channel with priority may be predetermined. In this case, the audio track will be selected based on the DVD's order of priority. DVD Volume You can set this option if the audio output level of the DVD is low. You can set this only when "Digital Out (Optical)" is set to "Off" in "Audio Digital Out" ( page 33). +2 Turns up the volume (maximum) +1 Turns up the volume Standard Normally select this option. Caution If you set this option to "+1" or "+2", the sound may become distorted. If this happens, change the setting to "Standard". Also note that if you set the volume too high, it may harm your hearing or damage the speakers. 34 Adjusting DVD player settings Main menu Displaying the main menu Using the Browser screen From the main menu, you can access information and change various settings. You can also move to the following screens from the main menu. The main menu is displayed when you turn on the console without a disc inserted. • Browser screen ( page 35) • System Configuration menu ( page 36) • Version Information screen ( page 39) 1 Turn on the console ( page 14). The main menu is displayed. Note that it may take some time for the main menu to be displayed. Note If you turn on the console with a disc inserted, the main menu will not be displayed. To display the main menu, press the A (open) button on the console front and remove the disc. Then press the =/1 (on/standby)/RESET button to reset the console. You can do the following from the Browser screen: • Copy or delete game data saved on a Memory Card • Start a game • Start playback of an audio CD • Start playback of a DVD 1 Display the main menu ( page 35). 2 Using the directional buttons, select "Browser" and then press the button. The Browser screen is displayed. 3 Insert a disc or Memory Card. The icon for the inserted item is displayed on the Browser screen. \ GB Main menu Displaying the main menu 35 4 Select an icon, and then press the butto...