Assessments - 0, GPA: 0 ( )

Fabricante : Philips Arquivo Tamanho: 847.03 kb Arquivo Nome : Língua de Ensino:

Product highlights Your surge protector may be equipped with any of the following features. Power Blocker™ protection Cuts off all power to AC outlets in the event of an electrical or power surge that overwhelms its protection. Solid State phone/fax/modem protection Provides maximum protection against surges present on standard two-wire “dial-up” phone service. 2 Your surge Protector Splitter phone line protection Splits incoming phone line into two outs, supporting and protecting phone and modem. Coaxial cable protection Provides maximum protection against surges present on standard coax/broadband lines. LED “protection working” indicator Alerts you to the operating status of the surge protector. This section helps you with the first time installation of your surge protector. 3.1 Connect your surge protector Warning Carefully read the safety precautions in section 1 Important before you connect your surge protector. Caution Do not use any extension cords, adapters, other grounding wires or electrical connections with your surge protector. Doing so will void all Philips warranties. To connect your surge protector: 1. Plug power cord into a properly grounded outlet. 2. Plug components’ power cords directly into your surge protector. 3.2 Connect your surge protector to a phone/fax/ modem Your surge protector may offer Solid State phone/fax/modem protection. This requires you to connect your phone/fax/modem to the protected jacks on your surge protector instead of connecting directly to the wall jack. Philips surge protectors with telephone protection are designed to provide maximum protection from surges present on two-line or “dial-up” telephone service. Other communications networks which happen to use modular jacks may not benefit from this protection. Caution The telephone feature of this surge protector could be rendered inoperable if improperly installed. Caution If you fail to connect the phone/fax/modem protection, your connected equipment will not be covered by the Philips Connected Equipment Warranty. Most modem damage can be prevented if you take the time to connect the phone/fax/modem protection. To connect phone/fax/modem protection: 1. Connect your phone/fax/modem line from your wall jack to the “input” jack on your surge protector. 2. Connect a phone cord into the “output” jack on the surge protector. 3. Connect the other end of the phone cord to the phone/fax/modem jack of the device you want to protect. Note To claim damage under the Philips Connected Equipment Warranty as a result of telephone service line transients, your equipment must be properly connected to a Philips surge protector which offers telephone line protection, and your telephone service equipment must include a properly installed and operating “primary protection” device at the service entrance. (Such devices are normally added during telephone line installation.) Your surge protector may offer “splitter” phone line protection. This works by splitting a single inc...

Baixe o seu

Para fazer o download, introduza 2 dígitos :