Log:
Downloads : 0   Arquivo Tamanho: 2 mb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under copyright laws. © Copyright 2000 Agilent Technologies All Rights Reserved. Reproduction, adaptation, or translation without prior written permission is prohibited, except as allowed under copyright laws. Agilent Technologies Lightwave Division 1400 Fountaingrove Parkway Santa Rosa, CA 95403-1799, USA (707) 577-1400 Notice. The information contained in this document is subject to chang

Downloads : 14   Arquivo Tamanho: 2 mb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

Failure to comply with these precautions or with specific warnings elsewhere in this manual violates safety standards of design, manufacture, and intended use of the instrument. Agilent Technologies assumes no liability for the customer's failure to comply with these requirements. SAFETY SYMBOLS BEFORE APPLYING POWER. Verify that the product is set to match the available line voltage ! Instruction manual symbol; the product will and that the correct fuse is installed. be marked with this symbol

Downloads : 1   Arquivo Tamanho: 2 mb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

Test Equipment Required The following Table A-1 lists the equipment required to perform the tests and adjustments of this section. You can separately identify the equipment for performance tests, calibration, and troubleshooting in the USE column of the table. Operation Verification Tests The following tests assure that the power supply is performing properly. They do not, however, check all the specified parameters tested in the complete performance test described below. Proceed as follows: A-2

Downloads : 0   Arquivo Tamanho: 2 mb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

Replaceable Parts List Reference Designator Agilen Part Number Q'ty Description Model Mfr. P/N Mfr. Code E3614A 1 60W BENCH POWER SUPPLY -E3614A MODEL E3615A 1 60W BENCH POWER SUPPLY -E3615A MODEL E3616A 1 60W BENCH POWER SUPPLY -E3616A MODEL E3617A 1 60W BENCH POWER SUPPLY -E3617A MODEL E3614-60005 1 MAIN BODY ASSY 14 28480 E3615-60005 1 MAIN BODY ASSY 15 28480 E3616-60005 1 MAIN BODY ASSY 16 28480 E3617-60005 1 MAIN BODY ASSY 17 28480 0371-3806 1 KEY CAP -WHT ALL 28480 0371-8624 1 KEY CAP -GRA

Downloads : 3   Arquivo Tamanho: 2 mb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

You can set up the unit for remote operating modes by changing the settings of the rear panel switch and connecting the leads from the rear panel terminals to the load or the external voltage. Solid conductors of 0.75 to 1.5 mm2 can be connected to the rear panel terminals by simply push fitting. Thinner wires or conductors are inserted into the connection space after depressing the orange opening lever. Turn off the supply while making changes to rear panel switch settings or connections. This

Downloads : 1   Arquivo Tamanho: 797 kb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

This document contains proprietary information that is protected by copyright.All rights are reserved. No part of this document may be photocopied, reproduced, or translated to another language without the prior written consent of the Agilent Technologies. Agilent Technologies Japan, Ltd. Component Test PGU-Kobe 1-3-2, Murotani, Nishi-Ku, Kobe-shi, Hyogo, 651-2241 Japan Copyright © 1990, 1998, 1999, 2000 Agilent Technologies Japan, Ltd. Manual Printing History The manual’s printing date and part

Downloads : 1   Arquivo Tamanho: 746 kb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

Some general operating information is included in this chapter to help you understand how the power supply operates under various load conditions. This information applies whether you are operating the supply via the front panel or the GP-IB. Output Ranges Figure 4-1 identifies the output combinations that are available on the power supply. Each output can operate as a constant voltage (CV) or constant current (CC) source over a wide variety of output voltage and current combinations. In additio

Downloads : 0   Arquivo Tamanho: 746 kb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

28 Installation FIRE HAZARD. Make sure the replacement fuse is one of the same type (size) and rating (amps) that is consistent with the voltage level you are operating at. Do not use a substitute fuse; use a fuse with the same Agilent Part number listed in Table 2-2. 6. Close the door of the line module and insert the power cord in the ac input socket. Your power supply is now configured to operate at the voltage you selected. GP-IB Interface Connector The GP-IB connector on the rear panel conn

Downloads : 7   Arquivo Tamanho: 746 kb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

Setting the Supply’s GP-IB Address As described in page 40, before you can operate the supply remotely, you must know its GP-IB address. You can find this out locally from the front panel by pressing: ADDR The supply’s present address will appear in the display. Address 5 is the factory set address. If you want to leave the address set at 5, you can return to the metering mode by pressing the METER key or you can press another function key. If you want to change the address, you can enter a new

Downloads : 0   Arquivo Tamanho: 746 kb   Fabricante : Agilent Technologies  
Categoria : Fonte de alimentação e fonte de alimentação
@name

This chapter contains all the information required to control your power supply remotely and discusses in greater detail how each of the commands can be implemented. The material covered is intended for any controller capable of using the GP-IB interface functions mentioned in Interface Functions on page 63. Four major sub-sections are discussed. These are: 1. GP-IB Operation 2. Programming Syntax 3. Initial Conditions 4. Power Supply Commands The GP-IB section briefly describes the GP-IB interf





categorias