Assessments - 3, GPA: 3.7
(
)
)
|
Facilidade de uso
If the top cover assembly becomes jammed and will not lift off, turn the V-cutter by pushing a piece of wood through the back chute of the top hopper to rotate the Vcutter to enable the top cover assembly to be removed. Reset motor overload protection switch. (See Fig. 4-1) 4-3. FEEDING LEAVES AND SMALL GARDEN CLIPPINGS - TOP HOPPER The sloping chute of the top hopper is designed to accept leaves and small garden clippings. Shredding and mulching is achieved by natural suction of the debris through the blade chamber. Do not overfeed and do not feed wet, soggy material into the garden shredder as this may clog the blade chamber and the discharge chute. (Fig. 4-3) 4-4. FEEDING TWIGS AND SMALL BRANCHES - TOP HOPPER The smaller back chute of the top Hopper accepts medium to larger size garden clippings. Shredding and mulching is achieved through the same action as the front chute. If a finer type mulch is required than is initially achieved, re-feed the mulch through again until the desired result is obtained. (Fig. 4-4). Do not feed solid branches through the two Top Hopper chutes. 4-1 ON-OFF Switch Overload Protection Switch 4-3 4-4 Your Shredder has been designed for a low level of maintenance, involving routine cleaning and inspection. The motor of the Shredder is maintenance free and requires no attention. For the best results the blades must be kept sharp at all times. The blades have dramatically less cutting power when blunt. The Shredder will tear rather than cut when the blades are blunt. When this occurs rotate the double sided blades or replace the blades immediately. WARNING Before attempting any maintenance switch the machine off and disconnect the power cord. 5-1. BLADE MAINTENANCE • Switch the machine off and disconnect the power cord ensuring all moving parts are completely stopped. • Wear gloves when attempting any maintenance to the cutting blades. JAMMING if blades become jammed refer to disassembly instructions and then remove obstruction. (Fig. 5-1A) 1. Open Top Hopper as illustrated in Fig. 5-1B Take extreme care not to come in contact with cutting blades. 2. Remove obstruction from cutting chamber. Close Top Hopper and retighten discharge chute access knobs. If discharge chute becomes clogged or cutting blades become jammed, under no circumstances should you place your hands in discharge chute to try to clear obstruction, as this will lead to serious injury. 5-2. SHREDDING BLADES MAINTENANCE WARNING Before removing discharge chute access knobs, ensure the machine is switched off, the red safety switch extension lead (A) (Fig. 5-2A) is removed and wait until the machine comes to a complete stop. To inspect or replace the double sided shredding blades, disconnect the power cord and open the Top Hopper. To remove blades, remove the counter sunk screws with the hex wrench supplied (Fig. 5-2B) . When blades are blunt on both sides replace with McCulloch blades and make sure they are screwed in tightly. 5-3. CLEANING After use, always wipe clean the outside of the shredder to remove any build up of material with a damp cloth. Clean the inside of the cutting chamber and remove any left over material, Do not hose down with water. 5 - MAINTENANCE INSTRUCTIONS 5-1A 5-1B 5-2A 5-2B A 10 11 6 - ONE YEAR LIMITED WARRANTY 1. DURATION The duration of the warranty for this McCulloch product is as follows: ONE (1) YEAR from date of original purchase only when used for personal, family, household, farm or ranch, purposes, provided the unit is not used for rental purposes; NINETY (90) DAYS from date of original purchase when used for commercial, professional, institutional or rental purposes. This warranty gives you specific legal rights. You may also have other rights which vary from state to state. MCCULLOCH CORPORATION HEREBY DISCLAIMS ALL IMPLIED WARRANTIES AFTER THE APPLICABLE EXPIRATION DATES OF THIS EXPRESS LIMITED WARRANTY. (Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.) 2. WHO GIVES THIS WARRANTY McCulloch U.S.A 1-800-521-8559 10715 Springdale Avenue, Unit 2, Santa Fe Springs, CA 90670 USA 3. WHO RECEIVES THIS WARRANTY A. The buyer (other than for purposes of resale) of the McCulloch Product. B. Any person to whom such product is lawfully transferred within the duration of the implied or written warranty applicable to the product. C. Any other person who is entitled by the terms of the warranty or under applicable state law to enforce against the Warrantor the obligation of the warranty. (The above mentioned parties are hereinafter referred to as “User.”) 4. WHAT IS COVERED UNDER THIS WARRANTY Any failure that occurs within the applicable duration of the warranty period that is the result of defects in materials or workmanship. 5. WHAT IS NOT COVERED UNDER THIS WARRANTY A. Any incidental or consequential damages that may result from the failure or malfunction of the McCulloch product. (Some states do not allow the exclusio...
Este manual também é adequado para os modelos :Jardim Shredders - 6096-200317 (873.7 kb)
Jardim Shredders - MCS2003 (873.7 kb)