Log:
Assessments - 2, GPA: 4 ( )

Instruções de Operação Craftsman, Modelo 247.775890

Fabricante : Craftsman
Arquivo Tamanho: 1.02 mb
Arquivo Nome : c048e0ba-d6a2-4d4b-a4f2-ec3df751321d.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


• Keep your face and body pack from chipper chute to avoid accidental bounce pack of any mstadel. • Do not transport machine while engine is running. • Ifthe cutting mechanism strikee a foreign object or if your machine should start making an unusual noise or vibration, immediately stop the engine and allow the machine to come to a complete stop. Disconnect the spark plug wire and move itaway from the spark plug. Take the followingsteps. a. Inspact for damage. b. Repair or replace any damaged parts. c. Check for any loose parts and tighten to assure continued safe operation. • Never attempt to attach or remove catcher bag when engine is running. Shut the engine off and wait for the impeller to come to a complete stop. The impeller continues to rotate for a few seconds after the engine is 3 shutoff.Neverplaceanypartofthebodyinthe impeller area until you are sure the impeller has stopped rotating. • Muffler and engine become hot and can cause a bum. Do not touch. • Do not allow leaves or other debris to build-up on engine's muffler. The debds could ignite and cause a fire. • Do not attempt to shred or chip material larger than ° specified inthis manual. Personal injuryor damage to the machine could result. • Do not operate engine if air cleaner or cover over carburetor air-intake is removed, except for adjustment. Removal of such parts could create a tim hazard. • Only use acoessodes approved for this machine by the manufacturer. Read, understand, and follow all instructions provided with the approved accessory. • If situations occur which are not covered by this manual, use care and good judgment. Contact your dealer for assistance. • Keep discharge chute deflector, chipper chute flap, and all other guards and safety devices in place and operating properly. • Only operate unit in good daylight. Do not operate unit at night or in dark areas where your vision may be impaired. CHILDREN Tragic accidents can occur ifthe operator is not alert to the presence of small children. Children are often attracted to the chipper-shredder and the chipping and shredding activity. Never assume that children will remain where you last saw them. • Keep children out of the work area and under the watchful eye of a responsible adult other than the operator. • Be alert and tum the unit off if a child enters the aree. • Never allow children under the age of 16 to operate the chipper-shredder. SERVICE Use extreme cam in handling gasoline and other fuels. They are extremely flammable and the vapors are explosive. a. Store fuel and oil in approved containers, away from heat and open flame, and out of the reach of children. Check and add fuel before starting the engine. Never remove gas cap or add fuel while the engine is running. Allow engine to cool at least two minutes before refueling. b. Replace gasoline cap securely and wipe off anl spilled gasoline before starting the engine as it may cause a fire or explosion. c. Extinguish all cigarettes, cigars, pipes and other soumes of ignition. d. Never refuel unit indoors because flammable vapors will accumulate inthe area. e. Never store the machine orfu_l cS"ntalnerinside where there is an open flame or spark such as a_ -.... gas hot water heater, space heater, clothes dryer or furnace. • Never run your machine in an enclosed area as the exhaust from the engine contains carbon monoxide, which is an odorless, tasteless and deadly poisonous gas. • To reduce fire hazard, keep engine and muffler free of leaves, grass, and other debds build-up. Clean up fuel and oil spillage. Allow unit to cool at least 5 minutes before storing. • Before cleaning, repaidng, or inspecting, make certain the impeller and all moving parts have stopped. Disconnect the spark plug wire and keep wire away from spark plug to prevent accidental starting. Do not use flammable solutions to clean air filter. • Check the blade and engine mounting screws at frequent intervals for proper tightness. Also visually inspectblades for wear and/or damage (e.g., bent, cracked). Replace with blades which meet original equipment specifications. • Keep all nuts, bolts, and screws tight to be sure the equipment is in safe working condition. Never tamper with safety devices. Check their proper operation regulady. After strikinga foreign object, immediately stop the engine, disconnect the spark plugwire from the spark plug, and thoroughly inspect the unit for any damage. Repair damage before starting and operating unit. • Do not alter or tamper with the engine's governor setting. The governor controls the maximum safe operating speed of the engine.. Ov_r-spmeding the engine is dangerous and will cause damage to the engine and to other moving parts of the machine. YOUR RESPONSIBILITY Rastdct the use of this power machine to persons who road, understand and follow the warnings and instructions In this manual and on the machine. SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE This unit is equipped with an internal combustion engine and should...

Este manual também é adequado para os modelos :
Jardim Shredders - 77589 (1.02 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias