Assessments - 4, GPA: 3.5
(
)
)
|
Facilidade de uso
Smoke may appear air or steam to escape. through the oven vent. If heavy spillovers are not wiped up before cleaning, they may flame and cause DO NOT force the more smoke and odor than usual. This is normal and safe and should not cause alarm. If available, use an exhaust fan during the self-cleaning cycle. oven door open. This can damage the automatic door locking system, Self-Clean Cycle time length Use caution and avoid possible For satisfactory results, use a 2 hour Self-Clean cycle for light soils and a 3 hour burns when opening the door after cycle for average or a 4 hour cycle for heavy soils. NOTE: The kitchen area the Self-Cleaning cycle has should be well ventilated using an open window, ventilation fan or exhaust hood completed, The oven may still be during the Self-Clean cycle. This will help eliminate the normal odors associated VERY HOT. with the Self-Clean cycle. To Set the Controls for a Self-Clean Cycle or a Delayed Start Self-Clean Cycle: (Note: If you do not want to start a Delayed Self-Clean Cycle, skip steps 2 & 3.) 1. Be sure that the clock is set with the correct time of day and the oven door is closed. 2. Press _. "DELAY" will flash. 3. Press and hold the A pad to scroll to the time to start the delayed Self-Clean cycle. Release the pad when the desired time is displayed. 4. Press _I_. " " appears in the display. v 5. Press thej_or Vonce. "3:00" appears in the display for a 3 hour cycle. To change to a 2 hour cycle press v. "2:00" appears in the display or to select a 4 hour cycle press j_. "4:00" appears in the display. As soon as the controls are set, the motor driven lock will begin to close automatically and the "DOOR LOCKED" indicator light will appear. DO NOT open the oven door while the light is flashing (it takes about 15 seconds for the oven door to lock). 6. "CLn" will appear in the display during the Self-Clean cycle and the "DOOR LOCKED" light will glow until the Self- Cleaning cycle is complete or cancelled and the oven temperature has cooled. When the Self=Clean Cycle is Completed: 1. The time of day or "End" will appear in the display window and the "Clean" and "DOOR LOCKED" light will continue to glow. 2. Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED" light has gone out, the oven door can be opened. 3. If "End" is in the display and the Select Clean indicator light remains ON, press ). The time of day will appear in the display. NOTE: When the oven is cool, wipe away any residue or powdered ash with a damp cloth or paper towel. Stopping or Interrupting a Self-Cleaning Cycle If it becomes necessary to stop or interrupt a Self-Cleaning cycle: 1. Press _. 2. Once the oven has cooled down for about 1 HOUR and the "DOOR LOCKED" light has gone out, the oven door can be opened. 3. Restart the Self-Clean cycle once all conditions have been corrected. 18 General Care & Cleaning Cleaning Various Parts of Your Oven Before cleaning any part of the oven, be sure all controls are turned OFF and the oven is COOL. REMOVE SPILLOVERS AND HEAVY SOILING AS SOON AS POSSIBLE. REGULAR CLEANINGS NOW WILL REDUCE THE EXTENT AND DIFFICULTY OF MAJOR CLEANING LATER. Surfaces Aluminum (Trim Pieces) & Vinyl Painted and Plastic Control Panel, Body Parts, and Decorative Trim Stainless Steel, Chrome Control Panel, Decorative Trim Porcelain Enamel Broiler Pan and Insert (some models), Door Liner, Body Parts Oven Racks How to Clean Use hot, soapy water and a cloth. Dry with a clean cloth. Do not scour or use all- purpose cleaners, ammonia, powdered cleaners or commercial oven cleaner. They can scratch and discolor aluminum. For general cleaning, use hot, soapy water and a cloth. For more difficult soils and built-up grease, apply a liquid detergent directly onto the soil. Leave on soil for 30 to 60 minutes. Rinse with a damp cloth and dry. DO NOT use abrasive cleaners on any of these materials; they can scratch. To remove control knobs, turn to the OFF position; grasp firmly and pull straight off the shaft. To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place. Before cleaning the controlpanel, turn all controls to OFF and remove the control knobs. To remove, pull each knob straight off the shaft. Clean using hot, soapy water and a dishcloth. Rinse with a clean water using a dishcloth. Be sure to squeeze excess water from the cloth before wiping the panel; especially when wiping around the controls. Excess water in or around the controls may cause damage to the appliance.To replace knobs after cleaning, line up the flat sides of both the knob and the shaft; then push the knob into place. Clean stainless steel with hot, soapy water and a dishcloth. Rinse with clean water and a cloth. Do not use cleaners with high concentrations of chlorides or chlorines. Do not use harsh scrubbing cleaners. Only use kitchen cleaners that are especially made for cleaning stainless steel. Always be sure to rinse the cleaners from the surf...
Este manual também é adequado para os modelos :Fornos Elétricos - 4777 (3.39 mb)
Fornos Elétricos - 4787 (3.39 mb)
Fornos Elétricos - 790.4773 (3.39 mb)