Log:
Assessments - 4, GPA: 4.5 ( )

Instruções de Operação AEG, Modelo COMPETENCE B8920-1

Fabricante : AEG
Arquivo Tamanho: 2.11 mb
Arquivo Nome : 643013en.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Setting Ovenlevels Water via water drawer Warming food 1, 3, 5 200 ml Cleaning and care 1 Warning: For safety reasons cleaning the appliance with a steam jet cleaner or high-pressure water cleaner is not permissible! Exterior of the Appliance • Wipe the front of the appliance with a soft cloth dipped in warm soapy water. • Do not use scourers, caustic cleaners or abrasive items. • Use commercially available cleaners for metal fronts. Oven Interior Cleaning Programme 1.Pour water (approx. 150 ml) and 1 tablespoon of vinegar directly into the steam generator. 2.Start the automatic cleaning programme. A triple signal is sounded at the end of the cleaning programme. 3.Stop the signal and switch off the oven by pressing the main power switch . Wipe out the oven with a soft cloth. Remove any residual water from the steam generator. To completely dry the oven, leave the oven door open for around 1 hour. Manual Cleaning 1 Warning: When cleaning, no oven functions must be selected and the oven must have cooled down. 3 Clean the appliance after each use. In this way, dirt is easier to clean off and is not allowed to burn on. 1.Open the oven door and press the oven light button . 2.After every use, wipe the oven with a solution of washing-up liquid and allow to dry. Do not use abrasive objects. If necessary, soak any dirt first or switch on the Vigorous Steam function for a short time. 3 Clean stubborn dirt with a special oven cleaner. 1 Important: if using an oven spray, please follow the manufacturer's instructions exactly. Accessories Wash all slide-in units (shelf unit, baking tray, shelf support rails etc.) after each use and dry well. Soak briefly to make them easier to clean. Grease Filter 1.Clean the grease filter in hot water and washing up liquid or in the dishwasher. 2.If dirt has become burnt on, simmer in some water and 2-3 tablespoons of dishwasher detergent. Side Rails To clean the sides of the oven, the left and right side rails can be removed from the oven. Taking out the side rails 1.Loosen the screw. 2.Pull the rails sidewards (1). 3.Lift the rails off the rear hook (2). To remove/replace the side rails on the right, open the cover on the meat probe socket. Replacing the side rails 1.Set the rails in the rear hook and press against the screw hole (1). 2.Insert the screw and tighten (2). Steam Generation System 1 Important: Wipe the steam generator dry after each use. Soak up wa ter with a sponge. Remove any lime residue with water and vinegar. To prevent the build-up of limescale, use only distilled or decalcified water, for example, from a water filter. 1 Important: Chemical de-scaling agents can damage the oven's surface enamel. Always follow the manufacturer's instructions exactly. Water Drawer and Steam Generator 1.Water and vinegar (about 200 ml) is not poured directly into the steam generator, but into the water drawer in the control panel. Leave it for about 10 minutes in the steam generator to take effect. 2.Remove the water and vinegar with a non-abrasive sponge. 3.Rinse out the steam generator system through the water drawer using clean, decalcified water (100200 ml). 4.Soak up remaining water from the steam generator with the sponge and wipe dry. 5.Leave the oven door open to let the oven dry out completely. Oven Light 1 Danger of electric shock! Before replacing the oven light bulb: • Switch off the oven. • Take the fuses out of the fuse box or switch off. 3 To protect the oven light bulb and the glass cover, lay a cloth on the bottom of the oven. Replacing the rear oven light bulb/ Cleaning the glass cap 1.Take off the glass cap by turning it to the left. 2.Remove seals and metal ring and clean the glass cap. 3.If necessary: replace bulb with a 25 Watt, 230 V, 300°C heat-resistant oven light bulb. 4.Fit seals and metal ring to the glass cap. 5.Re-fit the glass cap. Replacing the side oven light bulb/Cleaning the glass cap 1.Take out the side rails on the left. 2.Unscrew the metal frame using a cross-tip screwdriver. 3.Take off the metal frame and seal and clean them. 4.If necessary: replace bulb with a 25 Watt, 230 V, 300°C heat-resistant oven light bulb. 5.Re-fit metal frame and seal and tighten screws. 6.Replace the side rails. Oven Door The oven door of your appliance may be removed for cleaning. Removing the oven door 1.Open the oven door completely. 2.Completely fold back the brass coloured clamping lever on both door hinges. 3.Grip the oven door with both hands on the sides and close it to about 3/4 going past the point of resistance. 4.Pull the door away from the oven (Caution: heavy!). 5.Place the door, with the outer surface downwards, on a soft, flat surface, for example a blanket, to avoid scratches. Hanging the oven door 1.With both hands take hold of the sides of the door from the side on which the handle is positioned. 2.Hold the door at an angle of approx. 60°. 3.Slide the door hinges simultaneously as far as possible into the two slots on the right and left at the bottom...

Este manual também é adequado para os modelos :
Fornos Elétricos - COMPETENCE B8920-1 (2.11 mb)
Fornos Elétricos - COMPETENCE B8920-1 (2.11 mb)
Fornos Elétricos - COMPETENCE B8920-1 (2.11 mb)
Fornos Elétricos - COMPETENCE B8920-1 (2.11 mb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias