Assessments - 4, GPA: 3.8
(
)
)
|
Facilidade de uso
You will find the correct indications for the best installation, use and maintenance of the product. • Very important: keep this instruction booklet with the appliance in case you pass it on to someone else. • This appliance is designed for non professional use by private individuals at home. It must be used by conscious adults, do not allow children to play with it. The front accessible parts of the equipment could overheat during use. • Supervise children and non self-sufficient people when it is being used so that they do not touch hot surfaces and are not near the appliance while it is in use. • Don’t touch the heating elements inside the oven. • The product installation must be performed by competent and qualified installers who are aware of the installation regulations in force. • Before maintenance or cleaning disconnect the appliance from the mains and wait for it to cool down. • The user must not change the appliance supply cable. For replacement contact only a qualified engineer. • Never line the oven with aluminium sheets as the slots preset for keeping fast the thermic exchange may clog, thus damaging the enamel. • WARNING: accessible parts may become hot during use. Young children should be kept away. • For any repairs always contact an authorised Technical Customer Service Centre and ask for original spare parts. Repairs by untrained people can lead to damage. NOTES FOR THE INSTALLATION GB ELECTRICAL CONNECTION The appliances are provided with a three-pole feeding cable and work with alternate current and single-phase voltage indicated on the “rating plate of the product “report at the end of the instruction manual and on the product. The grounding conductor of the cable is marked with the colours yellow/green. CONNECTION OF THE FEEDING CABLE TO THE MAINS Connect the feeding cable of the oven to a plug suitable for the load indicated on the rating plate of the product. In case of a direct connection to the mains (cable without plug), it is necessary to insert a suitable omnipolar switch before the appliance, with minimum opening between contacts of 3 mm (the grounding wire should not be interrupted by the switch). Before connecting to the mains, make sure that: • the electrical counter, the safety valve, the feeding line and the socket are adequate to withstand the maximum load required (see rating plate). • the supply system is regularly grounded, according to the regulations in force. • the socket or the omnipolar switch can easily be reached after the installation of the oven • after carrying out the connection to the mains, check that the supplying cable does not come into contact with parts subject to heating. • never use reductions, shunts, adaptors which can cause overheating or burning. The manufacturer is not liable for any direct or indirect damage caused by faulty installation or connection. It is therefore necessary that all installation and connection operations are carried out by qualified personnel complying with the local and general regulations in force. This appliance complies with EEC Specification: -73/23 + 93/68 (low voltage equipment) -89/336 (electromagnetic compability) -89/109 ( components coming in conctact with foodstuffs) -2002/96 ( WEEE) NOTES FOR THE INSTALLATION GB INSERTION AND ASSEMBLY Insert the oven into the opening of the furniture, resting it on the base and pushing it as far as the ledge of the side stanchions against the shoulder of the piece of furniture. For the dimensions of the oven see furniture and technical data. •Open the door and fix the oven withfour wood screws to be screwed upthrough the holes in the side stanchions of the oven. Pay attention to fix the oven in an absolutely firm way, as above indicated, and to insulate the electrical elements in order to avoid an eventual contact with metallic parts . Moreover, the bonding agent joining the rolled sections to the piece of furniture has to stand temperatures no lower than 90°C to avoid deformations and coating disjunction. In case a plane is inserted, the electrical connection of the plane and that of the oven should be carried out separately, both for electrical reasons and to facilitate the frontal extractibility of the oven. Once the electrical connection has been carried out, apply voltage to the oven only after installing it. Before using the oven, we suggest to: • remove the special film covering the oven door glass (when provided) • heat the empty oven at max. temperature for 45 minutes (to remove unpleasant smell and smoke caused by working residues and by the thermal insulation) • carefully clean inside the oven with soapy water and rinse it . IMPORTANT: When running, the front side of the appliance gets quite hot. See that children do not get near the oven. INSTRUCTIONS FOR USE GB The selector A and thermostat B control is used to select the various oven functions and to choose the cooking temperatures best corresponding to the food to be cooked. During oven operation the lamp will a...