Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Hotpoint, Modelo BD81

Fabricante : Hotpoint
Arquivo Tamanho: 1.57 mb
Arquivo Nome : HBBD81.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


If there is a problem with your appliance then contact your Service Centre by using the table below to identify the appropriate phone number. Please have the following information available when you call: 1. (a) Your name. (b) Your address and postcode. (c) Your telephone number. 2. The date and the name of the shop/retailer where the appliance was purchased. Shop / Retailer: Date : The Model number and Serial number of your appliance (See Features page for Rating plate location). Model Number : Serial Number: 4. Clear and concise details of the fault. 5. Details of any Extended Warranty or Service Insurance Schemes. Your In-Guarantee Service Telephone Number The arrangements for In-Guarantee Service depend upon which Retail Outlet you purchased your product from. Shop / Retailer from where your appliance was Telephone Number for purchased In-Guarantee Service Just Rentals 01443 441 111 Hydro Electric / Scottish Hydro 0800 300 000 Any Other Shop / Retailer - UK 0541 500 500 - Republic of Ireland 1850 302 200 If you have any other queries regarding Service or Parts, our Parts and Service division will be pleased to help. You should write to : Hotpoint Service,Customer Service Department, Morley Way, Peterborough. PE2 9JB For Parts and Accessories, please telephone our Parts Order Hotline on 0541 530 530 (UK) or 01 842 6836 (Republic of Ireland). Note 1 : if under guarantee, our Engineers will need to see a copy of your purchase receipt when they call. Note 2 : Our Engineers will use every effort to avoid damage to floor coverings and adjacent units when carrying out repair/service work, but in locations where the Engineer advises you that it will be impossible to move the appliance without risk of damage, he will only proceed with your approval that no liability will be accepted. PRINTED BY SIMLEX ■ FOUR ASHES, WOLVERHAMPTON. November 1998 Part No. 481600024-02 FULL INSTRUCTIONS FOR INSTALLING AND OPERATING YOUR HOTPOINT DOUBLE OVEN MODEL BD81 Retention of this Instruction Book This Instruction Book must be kept handy for reference as it contains important details on the safe and proper use of the appliance. If you sell or pass the appliance to someone else, or move house and leave it behind, make sure this Book is also provided so the new owner can become familiar with the appliance and safety warnings. Before you operate your new Hotpoint Double Oven Please read these instructions fully. ; ENSURE THAT THE OVEN IS INSTALLED BY A QUALIFIED ELECTRICIAN | FOLLOWING THE INSTRUCTIONS BELOW. 1. Your oven should not be located adjacent to a gas hob/heater or eye level grill as flames from the burners could cause damage to your oven. 2. For your own safety and to get the best results from your oven it is important to read through this Handbook before using your oven for the first time including the Always and Never on pages 8 and 9. Electrical Requirements • For your own safety, we recommend that your cooker is installed by a competent person - such as one who is registered with NICEIC (National Inspection Council for Electrical Installation Contracting). The cooker should be installed in accordance with the latest Edition of the IEE Regulations. i WARNINGS - INCORRECT INSTALLATION COULD AFFECT THE SAFETY OF THE OVEN. - THIS APPLIANCE MUST BE EARTHED. - BEFORE CONNECTING OR INSTALLING THE OVEN THE _ELECTRICITY SUPPLY MUST BE SWITCHED OFF._ • THE INSTALLER MUST check that the voltage shown on the rating plate corresponds with the house electricity supply. • The oven must be supplied via a suitable double pole isolating switch, having a contact separation of at least 3 mm in all poles placed in a readily accessible position adjacent to the unit. • The maximum loading for your oven is 5.2kW. • If the oven is to be wired into a connector unit this may be positioned behind the oven provided the following requirements are met: i) The connector unit must not project from the wall more than 25 mm. ii) The top of the connector must not be more than 350 mm above the base of the oven recess. • After unpacking the oven stand it on the packing base in order to avoid damage. Electrical Connections • Remove the terminal cover at the rear base of the oven. Pass the cable through the cable clamp and connect to the appropriate terminals provided. Allow sufficient cable so that the oven can be set down on the floor whilst still connected up. Tighten the screws on the cable clamp and replace the terminal cover. Make mains connections. This appliance conforms to EN55014 regarding suppression of Radio and Television reception interference. Where a double oven is used a 20 amp double pole control switch should be used to feed the unit using a suitable rated cable. We recommend that a minimum of 4mm2 PVC insulated twin and earth cable conforming to B.S. 6004. • Where a hob is fitted adjacent to an oven then a 45 amp Double Pole control switch should be used to feed both units via se...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias