Assessments - 4, GPA: 4.3 ( )

Fabricante : Black & Decker Arquivo Tamanho: 1.76 mb Arquivo Nome : 945149EN.pdf Língua de Ensino:

It is on immediately when the appliance starts to heat. Reset the Count Up Timer: touch again and again until flashes in the display. Touch until the display shows "00:00" and the Count Up Timer starts to count up again. You can not use Count Up Timer when Duration or End is set. Setting the DURATION 1. Activate the appliance and set an oven function and temperature. 2. Touch again and again until the display shows . flashes in the display. 3. Use or to set minutes for DURATION. 4. Touch to confirm 5. Use or to set hours for DURATION. If you touch or during setting hours for DURATION, the appliance goes to setting of the END function. 16 16 Clock functions 6. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. The appliance deactivates. Touch any sensor field or open the oven door to stop an acoustic signal. 7. Deactivate the appliance. Setting the END 1. Activate the appliance and set an oven function and temperature. 2. Touch again and again until the display shows . flashes in the display. 3. Use or to set END (first you set minutes and then hours) and or to confirm. 4. When the set time ends, an acoustic signal operates for two minutes. symbol and time setting flash in the display. The appliance deactivates. 5. Touch any sensor field or open the oven door to stop an acoustic signal. 6. Deactivate the appliance. Setting the SET+GO To start of the appliance with necessary settings with only one touch of the sensor field, any time later. 1. Set an oven function (or programme) and temperature (refer to "Setting the oven function" and "Changing the oven temperature"). 2. Set DURATION (refer to "Setting the DURATION"). 3. Touch again and again until will flash in the display. 4. Touch to set the SET+GO function. The display shows and with a dot. This dot shows which clock function is activated. 5. Touch any sensor field (apart from ON/OFF) to start the SET+GO function. You can use SET+GO function only if DURATION is set. Check result (selected models only) If you set END or DURATION function, 2 minutes before end of cooking an acoustic signal sounds and lamp activates. The appliance goes to the setting of the END or DURATION function. During these two minutes you can examine the cooking results and, if necessary, add END or DURATION time. Setting the MINUTE MINDER Use the MINUTE MINDER to set a countdown (maximum 23 h 59 min). This function has no effect on the operation of the oven. You can set the MINUTE MINDER any time, also if the appliance is off. 1. Touch . and "00" flash in the display. Automatic programmes 17 2. Use or to set MINUTE MINDER. First you set seconds and then minutes and hours. 3. Touch or the MINUTE MINDER starts automatically after five seconds. 4. When set time ends, an acoustic signal operates for two minutes and "00:00" and flash in the display. 5. Touch any sensor field or open the oven door to stop an acoustic signal. Setting the Time delay function DURATION and END can be used at the same time, if the oven is to be switched on and off automatically later. In this case first set DURATION and then END function (refer to "Setting the DURATION" and "Setting the END "). When the Time delay function is activated the display shows static symbol of the oven function, with a dot and . The dot shows which clock function is on in the Clock/ Residual heat display. AUTOMATIC PROGRAMMES WARNING! Refer to "Safety information" chapter. There are 20 automatic programmes and recipes. Use an automatic programme or recipe when you do not have a knowledge or experience how to prepare a dish. You can find the recipes for the automatic programmes in the "Recipe book". There are three types of automatic programmes: • Automatic recipes; • Automatic programmes with weight input; • Automatic programmes with core temperature sensor; Automatic recipes Setting an automatic recipe: 1. Touch two times until the display shows . The display shows symbol and number of the automatic programme. 2. Touch or to choose the automatic recipes. 3. Touch or the automatic recipe activates automatically after five seconds. 4. When set time ends, an acoustic signal operates for two minutes. Symbol flashes. The appliance deactivates. 5. Touch any sensor field or open the oven door to stop an acoustic signal. Automatic programmes with weight input If you set the weight of the meat, the appliance calculates the roasting time. 18 18 Using the accessories 1. Touch again and again until the display shows . 2. Touch or to set the weight programme (refer to "Recipe book"). The display shows: cooking time, duration symbol , a default weight, a unit of measurement (kg, g). 3. Touch or the settings save automatically after five seconds. 4. The appliance starts. A symbol of the weight unit flashes in the display. During this time you can change the default weight value with or . Touch . 5. When set time ends, an acoustic signal operates for two minutes. flashes. The appliance d...

Baixe o seu

Para fazer o download, introduza 2 dígitos :