Assessments - 3, GPA: 4.3
(
)
)
|
Facilidade de uso
bracing Note: Cabinets installed adjacent to wall ovens to support must have an adhesion spec of at least a 194°F runners temperature rating. Door handle protrudes 3" from door face. Cabinets and drawers on adjacent 45° and 90° walls should be placed to avoid interference with the handle. Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. Electric wall ovens are not approved for installation with a plug and receptacle. They must be hard wired in accordance with installation instructions. Side-by-side installations require at least 2" between cutouts. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. CL 21-5/8" over centerline of cabinet (must support 275 lbs.) Cutout width 2 x 4 or equivalent runners 28-1/2'' MIN. 28-5/8'' MAX. 29-3/4 C 30 Recommended cutout location 32-1/2" from floor 21 Junction box location Allow minimum of 21'' for clearance to adjacent corners, drawers, walls, or etc. A=Allow 1" overlap of oven over top and bottom edges of cutout. B=Allow 11/16"–3/4" for overlap of oven over side edges of cutout. C=28-1/4" without trim and 28-3/4" with trim. Conduit 48-1/2" 5 27-1/4'' MIN. 27-5/16'' MAX. Cutout height A B 23-1/2'' MIN. Cutout depth 22'' MIN. Listed by Underwriters Laboratories Specification Created 5/09 320227 JTP70SP GE® 30" Built-In Single Convection Wall Oven Optional Undercounter Installation Dimensions Optional Undercounter Installation With Electric Cooktop (in inches) Dimensions (in inches) 1-1/2" Typical countertop 3-1/4 Power cord 3-1/2" MIN. Free space oven & radiant cooktop 22" from floor 30" built-in 4" To 4-1/2" Power cord for cooktop Junction box for oven Junction box in adjacent cabinet for cooktop hook-up 2 (two) 90°elbows & sufficient pipe to connect in adjacent cabinet Right cabinet side 3/4" Support Shut-off valve Pressure regulator 1/2" Black iron pipe Union Conduit 48-1/2" oven 22 Side View 4-3/4" to 5-1/4" 36" Typical Countertop height 30-3/4" to 31-3/4" 1-1/2" MIN. Free space Side View 22 27-5/16" MAX. Cutout height 27-1/4" MIN. Junction box(s) for Add suitable filler to match adjacent cabinets when needed to maintain toe kick alignment This installation is to achieve minimum gap between bottom of countertop and control panel. Undercounter Installation Note: For this installation, the bottom trim will not be flush with a typical 4" toe kick. Gas or electric cooktops may be installed over Note: Cabinets installed adjacent to wall ovens must have an adhesion spec of at least a 194°F temperature rating. Note: 36" radiant and induction cooktops are approved for use over GE 30" single wall ovens only. 30" radiant and induction cooktops are approved for use over GE 30" and GE 27" single wall ovens. Refer to cooktop and wall oven installation information packed with products for current dimensional data. Installation Information: Before installing, consult installation instructions packed with product for current dimensional data. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at ge.com or call GE Answer Center® service, 800.626.2000. Listed by Underwriters Laboratories 5 24 25 this oven. See cooktop installation instructions for cutout size. See label on top of oven for approved cooktop models. Gas (including the pressure regulator) and electrical connections for gas cooktop must be located in an adjacent accessible location. For a 30" gas cooktop, the connections are more conveniently made to the right. 120 Volt Outlet Gas connection Junction box location 240/208V 36'' MIN. 4'' To 4-1/2 '' Toe kick allowable Match toe kick height front and two sides 22'' MIN. above support platform Top and/or side fillers may be necessary if unit is positioned between existing cabinets 28-1/2'' MIN. 28-5/8'' MAX. 27-1/4'' MIN. 27-5/16'' MAX. Cutout height 3/4'' Support platform required 23-1/2" MIN. Cutout depth Allow 11/16'' overlap over side edges of cutout 1-1/2" Countertop Specification Created 5/09 320227 JTP70SP GE® 30" Built-In Single Convection Wall Oven Dimensions and Installation Information (in inches) Features and Benefits • PreciseAir™ Convection System -A reversing fan circulates heat and air for evenly browned and baked foods • Glass Touch Oven Controls -Feature a smooth glass design that is both easy-to-operate and easy-to-clean • Convection Bake (Multi-Mode) -Offers three specialized modes for different cooking needs: single-rack convection baking, multi-rack convection baking and convection roasting • Convection Roast -Optimal for larger cuts of meat, this setting rotates the heat around all sides, sealing in the juices, producing rotisserie results at up to 25% faster than a conventional oven • Flat Back Convection -Convection fan system is only 1” deep to provide additional room for cookware • Hidden Bake Oven Interior -Conceals the lower oven bake el...