Log:
Assessments - 3, GPA: 4 ( )

Instruções de Operação Conair, Modelo MN252CSC

Fabricante : Conair
Arquivo Tamanho: 368.69 kb
Arquivo Nome : 5825ada4-c661-4518-8068-f18a509484a6.pdf
Língua de Ensino: enfr
Ir para baixar



Facilidade de uso


11. This product is for household use only. SAVE THESE INSTRUCTIONS TROUBLESHOOTING There are several things to look for if your trimmer fails to operate: 1. Be sure the trimmer is turned ON. 2. Check the blades to see if they are clogged with hair clippings; if so, use the cleaning brush to remove hair. 3. If the trimmer still fails to operate, take or send it to a Conair Service Centre (see warranty procedure and addresses). If your rechargeable trimmer does not seem to be taking a charge, take the following troubleshooting steps before returning it for repair: 1. Be sure the electrical outlet is working, by plugging in another appliance to test it. 2. Make sure the electrical plug is not connected to a switch which turns power off when lights are turned off. 3. Be sure you have inserted the trimmer properly into the charging stand, that all connections are secure, and that the trimmer switch is in the “OFF” position. FOR HOUSEHOLD USE ONLY OPERATING INSTRUCTIONS FOR YOUR RECHARGEABLE TRIMMER Check to be sure which model you have purchased. 1. Before using your trimmer for the first time, insert the trimmer in the charging base and then plug into wall outlet and charge it for 16 hours. Always place the trimmer in the stand with the ON/OFF switch in the OFF position. Attempting to charge the unit in the ON position can cause damage to the unit and it will not charge. 2. Always check to see if the charging light is on when the cord is connected to the trimmer and the unit is not in use. 3. Plug unit into any 120V, 60Hz wall outlet. 4. The trimmer can remain plugged into the power source at all times without damage to the battery. 5. To use your trimmer, push ON/OFF switch upwards to “ON” position. 6. After you finish using your trimmer, push down on the ON/OFF switch to turn the trimmer off. 7. If, while trimmer is in use, the charge seems to be running down, simply put ON/OFF switch in OFF position. Then, insert the trimmer in the charging base and plug into wall outlet. Allow battery to recharge for several hours. 8. To maintain the full charging capacity and extend the life of the battery, it must be periodically run down during normal use until it stops, then recharge. 9. The charge base may become warm while charging – this is normal. 10. To charge the unit when traveling, you do not need to take the stand with you. Just plug the cord directly into the unit and the unit will begin charging. (Remember switch must be in the “OFF” position, Remove the battery cap and push the batteries out. Bring the batteries to the nearest collection centre for proper disposal. DO NOT throw the battery into the normal municipal waste system. TURBO FEATURE This product is equipped with a turbo boost button. When activated, this will proved 15% more cutting power. This is especially useful for cutting through thicker hair. To activate the turbo feature: 1. Turbo the power switch to the “ON” position 2. Press the Turbo button, it is the round button located on the side of the trimmer 3. Continue to press the Turbo button for as long as you need the extra power 4. Release the Turbo button to return to normal power PIVOTING HEAD To make it easier to trim hard to reach areas, the trimmer has a multi position pivoting head. To pivot the head: 1. Press the release buttons on the side of the trimmer and rotate the pivoting head. (see image) 2. Press bottom of the trimmer head until it clicks into the position that is most comfortable for trimming your face. TYPES OF BEARDS/MUSTACHES GROWING A BEARD OR MUSTACHE There are three key factors that determine which beard or mustache style is most suitable for your face: 1. The shape and dimensions of your face. 2. The natural growth of your beard/ mustache. 3. The thickness of your beard/mustache. If you are unsure of the type of beard or mustache that most suits your face, speak with a professional hair stylist and ask for an opinion on what style would be best. Once your beard or mustache has been styled, it is essential that you maintain its appearance. To do this, use your shaper to trim your beard/mustache weekly. For the best trimming results, your beard should be slightly damp (not wet) before using the trimmer. This will prevent the trimmer from removing more hair than desired. GETTING STARTED TO SWITCH TRIMMER HEADS Hold the trimmer handle with the back of the trimmer facing you. Attach the beard trimmer head by aligning both arrows on the foil frame and on the head until it clicks into place. (Fig.1) Attach another head by pushing it down on the top of the trimmer until it snaps into place. USING THE SHAVER ATTACHMENT Attach the foil shaver head by snapping it in place. Turn unit on. Gently press the foil head against your skin where you want to completely shave the skin clean. Gently pull your skin taught and move the shaver in a circular motion over your skin. When you are finished, or if you have a lot of stubble to remove, press the release buttons on the side of the shav...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias