Log:
Assessments - 4, GPA: 3.8 ( )

Instruções de Operação Panasonic, Modelo ES8067

Fabricante : Panasonic
Arquivo Tamanho: 543.15 kb
Arquivo Nome : ES8068.PDF
Língua de Ensino: enesfr
Ir para baixar



Facilidade de uso


pJoase read Vi«»*. Inductions ccmpie’.eJy. V es1 rowrnwde de Ire anontrvw^nf oe тагчю! avart Гаррагой IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should always be followed, including the following: Read all instructions before using this appliance. DANGER To reduce the risk of electric shock: 1. Do not install the base unit where it can fall into a tub or sink. 2. Never attempt to retrieve the charging adaptor if it has fallen into water. Unplug the appliance immediately. 3. Do not place, or store, the charging adaptor where it can fall into a tub or sink. Do not place, or drop it, into water or other liquid. WARNING 1. Do not use this shaver with damaged shaving blades and/or foil, as facial injury may occur. 2. Close supervision is necessary when this shaver is used by, on or near children or invalids. 3. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by the manufacturer. 4. Never operate the charging adaptor if it has a damaged cord or plug, if it is not 4. Before charging the shaver, wipe off any moisture from the shaver and charging adaptor. Always handle with dry hands. 5. Always charge the shaver in a cool, dry place. 6. Except when charging, always unplug the charging adaptor from the electrical outlet. 7. Unplug this appliance before cleaning. To reduce the risk of burns, fire, electric shock, or injury to persons: working properly, if it has been dropped or damaged or dropped into water. Return the appliance to a servicentre for examination and repair. 5. Never drop or insert any object into any opening. 6. Keep the cord away from heated surfaces. 7. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 8. Periodically inspect the wall unit for secure mounting. SAVE THESE INSTRUCTIONS Index ENGLISH Page 7 FRANÇAIS Page 11 ESPAÑOL Pagina 16 3 4 5 Before use This Wet/Dry shaver can be used for wet shaving with shaving lather or for dry shaving. You can use this watertight shaver in the shower and clean it in water. Treat yourself to wet lather shaves for at least three weeks and notice the difference. Your Panasonic Wet/Dry shaver requires a little time to get used to because your skin and beard need about a month to adjust to any new shaving method. Charge the shaver for at least 8 hours before using it for the first time or when it has not been in use for more than six months. Parts identification (see fig. 1) ® Protective cap ® System outer foil © System outer foil release buttons © Foil frame © Inner blades © Foil frame release buttons © On/Off switch © Switch lock button (D-a Battery capacity monitor (ES8068) ®-b Recharge lamp (ES8067) 0 Charge status lamp ®-a Rubberized side grips (ES8068) ®-b Side grips (ES8067) © Trimmer <8> Trimmer handle Charging adaptor with auto- matic voltage adjustment @ Wall mount Wood screws © Travel pouch How to use the wall mount DANGER-To reduce risk of death by electric shock, do not install where unit can fall into a tub or sink. The charging adaptor can be hung on the wall using wood screws (included). 1. Select an appropriate location on the wall where the screws can go in. 2. Attach the wall mount to the wall as shown with the wood screws, making sure that the arrow points up. 3. Slide the charging adaptor grooves into the wall mount until it clicks in. To remove the charging adaptor from the wall mount, slide the adaptor upward. Charging (see fig. 2 for ES8068, see fig. 3 for ES8067) Place the charging adaptor upright on a flat surface or mount it on a wall. Plug the adaptor into an AC outlet. It will adjust automatically to voltages between 100-120 and 220-240V AC. In some areas, a special plug adaptor may be required. Switch the shaver to the "0 • charge” position and place it upright into the 7 charging adaptor with the switch facing toward the front. The charge status tamp will glow red when the shaver is placed on a right charging position. It will flicker red when the charging is completed. At the same time for the ES8068, the battery capacity monitor will display the fully charged condition (see fig. 2A).The system will turn off in about 10 minutes after the charging has been completed (see fig. 2B). You can fully charge the shaver in one hour if the battery capacity monitor flashes down to the 20% level (ES8068), or if the recharge lamp flashes green (ES8067, see fig. 3A). A full charge will supply enough power for about 14 shaves (three minutes per shave for a normal beard). You can always store your shaver in the charging adaptor to maintain full power capacity. This shaver cannot be overcharged. Before traveling, charge it fully for one hour if you will not be taking the charging adaptor with you. In case your shaver is discharged, you may quick charge it for one shave in about five minutes. For a ...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias