Assessments - 3, GPA: 5 ( )

Fabricante : Gillette Arquivo Tamanho: 2.1 mb Arquivo Nome : Língua de Ensino:

We hope you enjoy your new Gillette Shaver. Warning Your shaver is provided with a special cord set, which has an integrated Safety Extra Low Voltage power supply. Do not exchange or tamper with any part of it, otherwise there is risk of electric shock. Description 1 Foil protection cap 2 Shaver foil 3 Cutter block 4 Long hair trimmer (model 150 only) 5 On switch («power») 6 «off» switch 7 Power LED 8 Shaver power socket 9 Special cord set Charging The best environmental temperature for charging is between 5 °C and 35 °C. Do not expose the shaver to temperatures higher than 50°C for extended periods of time. • Using the special cord set (9), connect the shaver to an electrical outlet with the motor switched off. • To make sure that the shaver is switched off, press the «off» switch (6) before you start charging. • When charging for the first time, leave the shaver to charge continuously for 16 hours. • The power LED (7) indicates that the shaver is connected to an electrical outlet. • Subsequent charges will take about 8 hours. • A full charge provides up to 20 minutes of cordless shaving time. This may vary according to your beard growth. • Maximum battery capacity will only be reached after several charging/ discharging cycles. Shaving Press the on switch (5) to operate the shaver. Model 150 only: To trim sideburns, moustache or beard, slide the long hair trimmer (4) upwards. Tips for the perfect shave For best shaving results, we recommend you to follow 3 simple steps: 1. Always shave before washing your face. 2. At all times, hold the shaver at right angles (90°) to your skin. 3. Stretch your skin and shave against the direction of your beard growth. Cleaning The shaver head is suitable for cleaning under running tap water. Warning: Detach the shaver from the power supply before cleaning the shaver head in water. 7 Regular cleaning ensures better shaving performance. Rinsing the shaving head under running water after each shave is an easy and fast way to keep it clean (A): • Switch the shaver on and rinse the shaver head under hot running water. You may use liquid soap without abrasive substances. Rinse off all foam and let the shaver run for a few more seconds. • Next, switch off the shaver, remove the shaver foil (2) and cutter block (3). Then leave the disassembled shaving parts to dry. • If you regularly clean the shaver under water, then once a week apply a drop of light machine oil onto the long hair trimmer and shaver foil. Alternatively, you may clean the shaver using the brush provided (B): • Switch off the shaver. Remove the shaver foil and tap it out on a flat surface. • Using the brush, clean the cutter block and the inner area of the shaver head. However, do not clean the shaver foil with the brush as this will damage the foil. Environmental notice This appliance contains ''fwT* rechargeable batteries. In the JqL interest of protecting the environment, please do not dispose of the produ...

Baixe o seu

Para fazer o download, introduza 2 dígitos :