Assessments - 0, GPA: 0 ( )

Fabricante : Philips Arquivo Tamanho: 3 mb Arquivo Nome : Língua de Ensino:

3). -These Philips appliances comply with all standards regarding electromagnetic fields (EMF). If handled properly and according to the instructions in this impor tant information booklet and in the usage information booklet packed with the shaver, the appliances are safe to use based on scientific evidence available today. the display Note: Before you use the shaver for the first time, remove the protective foil from the display. English The three shaver types (RQ1180, RQ1160 and RQ1150) have different displays, which are shown in the figures below. -RQ1180 (Fig. 4) -RQ1160 (Fig. 5) -RQ1150 (Fig. 6) charging -Charging takes approx. 1 hour. RQ1180 -When the shaver is charging, first the bottom charging light flashes, then the second charging light, and so on until the shaver is fully charged (Fig. 7). -Quick charge: When the shaver contains enough energy for one shave, the bottom charging light alternately flashes orange and white. RQ1160/RQ1150 -When the shaver is charging, the batter y symbol flashes until the shaver is fully charged. (Fig. 8) -Quick charge: When the shaver contains enough energy for one shave, the plug symbol and batter y symbol flash alternately. Note:The displays of types RQ1160 and RQ1150 look different, but work in the same way. Battery fully charged RQ1180 -When the batter y is fully charged, all charging lights light up continuously. After approx. 30 minutes the display automatically switches off again. (Fig. 9) RQ1160/RQ1150 -When the batter y is fully charged, the batter y symbol lights up continuously. After approx. 30 minutes the display automatically switches off again. (Fig. 10) Note:The displays of types RQ1160 and RQ1150 look different, but work in the same way. Battery low RQ1180 -When the batter y is almost empty (when there are only 5 or fewer shaving minutes left), the bottom charging light flashes orange. (Fig. 11) -When you switch off the shaver, the bottom charging light continues to flash for a few seconds. RQ1160/RQ1150 -When the batter y is almost empty (when there are only 5 or fewer shaving minutes left), the plug symbol flashes (Fig. 12). -When you switch off the shaver, the plug symbol continues to flash for a few seconds. Note:The displays of types RQ1160 and RQ1150 look different, but work in the same way. Remaining battery capacity RQ1180 -The remaining batter y capacity is indicated by the number of charging lights that are on. (Fig. 13) travel lock You can lock the shaver when you are going to travel. The travel lock prevents the shaver from being switched on by accident. activating the travel lock 1 Press the on/off button for 3 seconds to enter the travel lock mode (Fig. 14). The lock symbol lights up on the display. -tekening-(Fig. 15) , Note:The displays of types RQ1180, RQ1160 and RQ1150 look different, but show the same symbol. Deactivating the travel lock 1 Press the on/off button for 3 seconds. The motor starts running to indicate that the travel lock has been deactivated. , The shaver is now ready for use again. Note:When you place the shaver in the plugged-in charger or Jet Clean System, the travel lock is automatically deactiv...

Baixe o seu

Para fazer o download, introduza 2 dígitos :