Assessments - 5, GPA: 4
(
)
)
|
Facilidade de uso
Close supervision is necessary when this appliance is used by, on or near children or individuals with certain disabilities. 2. Use this appliance only for its intended use as described in this manual. Do not use attachments not recommended by Andis. 3. Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an Andis Authorized Repair Station for examination or repair. 4. Keep the cord away from heated surfaces. 5. Never drop or insert any object into any opening. Insert only recharging transformer plug into trimmer receptacle. 6. Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered. 7. Do not use this appliance with a damaged or broken blade, as injury to the skin may occur. 8. Always attach plug to appliance first, then to outlet. To disconnect, turn all controls to “off” then remove plug from outlet. SAVE THESE INSTRUCTIONS THIS PRODUCT INTENDED FOR PROFESSIONAL USE OPERATING INSTRUCTIONS Please read the following instructions before using your new Andis Shaver. Give it the care that a fine precision built instrument deserves and it will give you years of service. RECHARGING SHAVER Remove Andis shaver and cord adapter from carton. Plug adapter into a 120V AC electrical outlet. Note that the shaver’s ON/OFF switch must be in the OFF position for the battery to charge. Plug cord adapter directly into the cord inlet located on the bottom of the shaver. The charging indicator light on the shaver will turn on. The shaver is not charged at the factory. Please recharge shaver for 16 hours before first use for maximum performance. The adapter will maintain the battery at full charge and the green light will stay on. The shaver can not be overcharged even when you leave it plugged in. However, we recommend that you charge the shaver only when it is completely discharged. This will help to elongate the life of the battery. Recharging generally takes 14-16 hours. A fully charged shaver will provide approximately one week of shaving operation time. ATTENTION: The product you have purchased contains a rechargeable battery. The battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of this battery into the municipal waste stream. Check with your local solid waste officials (or call 1-800- 822-8837) for details in your area for recycling options or proper disposal. For Shaving To maximize shaving comfort, be sure to clean the shaver thoroughly after use. 1. Remove the protective plastic headguard. 2. Ensure that the outer foil and inner cutter are not damaged. Replace damaged parts before using. For more information on replacement parts, contact Andis or the nearest Andis Authorized Repair Station. 3. For shaving, ensure that the battery is charged. 4. Depress the switch lock button and slide the ON/OFF switch up to the ON position. 5. Gently stretch the skin of your face with your free hand while moving the shaver slowly and smoothly against the grain of your beard. Hold the razor at a 90 degree angle to your face while maintaining contact with the foil. 6. To shave the chin area, gently pull the skin upward and stroke the razor in an easy up and down motion. To avoid damaging the delicate foils, do not apply high pressure. For Trimming 1. Use the trimmer adjustment lever to adjust the length of the trimmer head. Slide the trimmer up into its locked position and stroke gently against the hairs to be cut (Diagram 2). 2. To trim sideburns, hold so that the trimmer lightly touches the skin at a 90 degree angle and move downwards. Avoid draining the battery by keeping the trimmer in its off position when not in use. Shaving Tips 1. Keep the unit clean and dry at all times. 2. Wash and dry your skin thoroughly prior to shaving. 3. In order to achieve the closest shave and avoid unnecessary wear on the foils, be sure that both foils contact the skin simultaneously. Do not hold the shaver at an angle where only one foil contacts the skin – this will cause distortion of the foil and may result in skin irritation. 4. Stretch your skin with your free hand while using short, circular strokes. This will make the hairs stand out from your face and allow the cutting heads to reach them more easily. 5. To facilitate cutting and avoid foil wear, do not apply the razor to your skin with high pressure. USER MAINTENANCE If shaver is to remain unused for a long period of time, store in a safe, cool, dry place. Do not wrap cord tightly around appliance. Do not hang the unit by the power cord. Other than the recommended maintenance described in this manual, no other maintenance should be performed, except by Andis Company or an Andis Authorized Repair Station. IMPORTANT: For best shaver performance and results, it is recommended that you replace your shaver’s cutters and foils every six months. TO ...