Log:
Assessments - 2, GPA: 3.5 ( )

Instruções de Operação Pelonis, Modelo HB-211

Fabricante : Pelonis
Arquivo Tamanho: 142.16 kb
Arquivo Nome : 22c33044-c38e-432e-b0bc-a36405585246.pdf
Língua de Ensino: enes
Ir para baixar



Facilidade de uso


· Check for any obstruction. If you find any obstruction, turn the heater “OFF”. Unplug the heater and wait a few minutes for it to cool down. Carefully remove the obstruction. Plug the heater in and turn it on again by referring to the OPERATING INSTRUCTIONS. NOTE: IF YOU EXPERIENCE A PROBLEM WITH YOUR HEATER, PLEASE SEE THE WARRANTY INFORMATION FOR INSTRUCTIONS. PLEASE DO NOT ATTEMPT TO OPEN OR REPAIR THE HEATER YOURSELF. DOING SO MAY VOID THE WARRANTY AND COULD CAUSE DAMAGE OR PERSONAL INJURY. IF THE PROBLEM STILL PERSISTS, PLEASE CONTACT US BY REFERRING TO THE SERVICE & SUPPORT INFORMATION ON THE FOLLOWING PAGE. CLEANING AND STORAGE It is recommended that the heater be cleaned at least one time during the operating season in order to provide the optimum level of performance. ALWAYS TURN THE POWER SWITCH OFF AND UNPLUG THE HEATER BEFORE CLEANING. Be sure to save the box for off-season storage. · Turn the heater “OFF”, unplug it and wait for the heater to cool down. · Use a dry cloth to clean only external surfaces of the heater. · Do not use any cleaning agents or detergents. · Never immerse the heater in water. · Pack the heater in the original carton and store it in a cool and dry place. SPECIFICATIONS Model No.: HB-211 Voltage: 120V, 60Hz Current: Maximum continuous draw: 12.5 Amps. Output: 5200 BTUs Power: LOW = 600 Watts, MED = 900 Watts, HIGH = 1500 Watts Tolerances on all specifications: Approximately +5%, -10%. OPERATING INSTRUCTIONS · Place the heater on a firm level surface free from obstructions, and at least 3 ft. away from any wall and any other objects such as furniture, curtains, plants or combustible material. · With the Power and Setting Control “A” in the ”OFF” position, plug the heater into a grounded 120V outlet. · Turn the heater ”ON” by turning the Power and Setting Control “A” clockwise to your desired power setting (FAN, LOW, MED, or HIGH). The Power Indicator Light “B” will illuminate. The power settings operate as follows: FAN: The Fan circulates room air only. The heating elements are “OFF”. LOW: The Fan and heating elements operate at 600 Watts. MED: The Fan and heating elements operate at 900 Watts. HIGH: The Fan and heating elements operate at 1500 Watts. CAUTION: This heater includes a Thermal Cut-Off Overheat Protection System that shuts the heater off if it overheats due to abnormal conditions. If this occurs, turn the heater ”OFF”, unplug it, and inspect and remove any objects on or adjacent to the heater. Allow it to cool for a few minutes, plug it back in, and resume normal operation. B A Carry Handle IMPORTANT! (behind unit) Your heater is equipped with a polarized alternating current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your outlet. DO NOT defeat the safety purpose of the polarized plug. Control Panel Functions Power and Setting Control Power Indicator Light A B SERRVIICCEE && SUPPOORT OONNEE ((11)) YYEEAARR LLIIMMIITTEEDD WWAARRRRAANNTTYY For usage tips about this heater, to register your heater warranty online, or to obtain information about other Pelonis USA products, please visit our website at In the event of a warranty claim or if service is required for this heater, please contact us at the following: Toll Free: 1-800-842-1289 or 1-610-695-8700 (M-F 9:00am to 5:00pm EST) Email us at: service@pelonis.com For questions or comments, please write to: Pelonis USA, Ltd. Att: Consumer Relations Department P.O. Box 785 Malvern, PA 19355 USA For your records, staple your sales receipt to this manual and record the following: DATE OF PURCHASE: ____________________________________________________________ PLACE OF PURCHASE: ___________________________________________________________ SERIAL NUMBER:_______________________________________________________________ (STAPLE SALES RECEIPT HERE) NOTE: PROOF OF PURCHASE IS REQUIRED FOR ALL WARRANTY CLAIMS • Please read all instructions before attempting to use this product. • Please return the Warranty Registration card within fifteen (15) days from the date of purchasing this product. Pelonis USA, Ltd., referred to hereafter as Pelonis USA, warrants as limited herein to the original purchaser of retail that each new Pelonis Fan Forced heater, shall be free of defects in material and workmanship for a period of one (1) year from the date of original purchase. This one (1) year warranty is limited to the heating elements, motor, and electric control circuit board. In the event of malfunctions or failure of your Pelonis Fan Forced heater, simply deliver or send the heater, postage prepaid along with PROOF OF PURCHASE, within the warranty period of one (1) year, to Pelonis USA. Pelonis USA reserves the right to inspect the claimed defective part or parts to determ...


Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias