Assessments - 2, GPA: 3.5
(
)
)
|
Facilidade de uso
Owner’s manual: model 200605C outdoor patio heater Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Components Part Re-order Name Number Finial 56-0 - 03 Dome Cap 56-0 - 04 Dome Nut 56-0 -208 Dome Plate 56-0 - 05 Dome Panel (3) 56-0 - 07 Dome Rib (3) 56-0 - 09 Bottom Plate 56-0 - Dome Bolt 56-0 -2 2 Emitter 56-0 - 8 Pilot Assembly 56-0 - 27 Injector 56-0 - 25 Knob 56-0 - 56 Access Panel Assembly 56-0 - 40 Impulse Ignitor 56-0 - 42 Valve 56-0 -304 Valve Housing Assembly 56-0 - 46 Pole 56-0 - 58 Shroud 56-0 - 64 Platform 56-0 - 65 Gas Line/ Regulator Assembly 56-0 - 88 Legs (3) 56-0 - 93 Base 56-0 -329 Weight Plate 56-0 - 98 Hardware Used in Picture Qty Description Step(s) 56-0 - 99 2 Bolt /4-20 x 3/4” Nickel Plated Hex Head Bolt 56-0 -200 Large Screw /4-20 x ” Nickle Plated Philips Head Screw 56-0 -202 4 Small Screw /4-20 x 3/8”Stainless Steel Philips Truss Head Screw 56-0 -2327 3 Dome Screw 5/32-32 x /4” Stainless Steel Round Head Screw 56-0 -205 2 Small Lockwasher M6 Nickel plated Lockwasher 56-0 -328 Large Lockwasher M 0 Nickel Plated 56-0 -207 Carriage Bolt 3 3/8- 6 x 3-3/4” Zinc Plated Bolt & 2 2 5 8 & 2 3 Large Nut 3 3/8- 6 Nickel Plated Hex Nut 56-0 -330 Medium Nut 8 3/8- 6 Stainless Steel Hex Nut 56-0 -208 5 Small Nut , 2 & 9 /4-20 Nickel Plated Hex Nut 56-0 -209 Gas Line Clip 2 56-0 -2 3 Allen Wrench 6 56-0 -2 5 Owner’s manual: model 200605C outdoor patio heater Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Owner’s manual: model 200605C outdoor patio heater Assembly Instructions General Components & Features Familiarize yourself with all components before proceeding. Refer to page 5 for hardware and components, and page 21 for specifications. Do NOT attempt assembly unless all components are available. If you believe a component is missing or damaged, contact 1.800.762.1142 for assistance. Note: All hardware is mounted on a cardboard pack and numbered to match their assembly step. Additional Requirements The following items are not included, but are necessary for the proper assembly of your heater. Do NOT attempt to assemble without proper tools. A hex (Allen) wrench is necessary and is included in the parts bag. (1) 7/16” Wrench (1) 9/16” Wrench (1) 7/16” Socket Wrench (1) #2 Phillips Head Screwdriver (1) Leak Detection Solution (Instructions on how to make solution are included in step 12) (1) Precision Filled LP Gas Grill Tank with Acme Type 1 external threaded valve connection (4-5 gallon size) Note: You must follow all steps to properly assemble heater. Note: Unpacking note for 200605C patio heater. When unpacking your heater from the carton, you will find that the engine assembly and the base have been bolted together for shipping purposes. Remove the three nuts at the top of the base and separate the engine from the base. Retain these nuts for use in Step 9. You are now ready to begin assembly of your patio heater. Step 1 – Attach Legs to Base Secure Legs to Base using (2) Small Bolts, (2) Small Lock Washers and (2) Small Nuts per leg. Finger tighten only. Do not fully tighten until Step 2. Attach small ‘S’ hook on Tank Restraint Chain to left leg. Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Step 2 – Attach Platform to Legs Line up hole in Clip with small threaded hole on bottom of Platform . Attach Clip loosely to Platform with ( ) Large Screw . Note: Do not tighten until step 9 . Using 7/ 6” wrench, secure Platform to Legs using (2) Small Bolts, (2) Small Lock Washers and (2) Small Nuts per Leg Tighten fully . Fully tighten all nuts and bolts from Step . TIP: To tighten use a 7/ 6” wrench on Bolt and a 7/ 6” socket wrench on Nut Step 3 – Attach Weight Plate to Base Lay Base Assembly on its side . Place Weight Plate in Base, feet out . Note: If you plan to anchor your heater permanently, be sure to line up two outer holes in Base with those in Weight Plate so that your anchor bolt will pass through both holes . Insert Carriage Bolt through center holes of Base and Plate . Using 9/ 6” wrench, secure Plate to Base using ( ) Large Lock Washer and ( ) Large Nut . Place Base Assembly upright . Owner’s manual: model 200605C outdoor patio heater Contact 1.800.762.1142 for assistance. Do not return to place of purchase. Step 4 – Insert Gas Line through Platform/Attach Shroud Cover Insert Gas Line up through large hole in Platform from underneath between center and left leg as shown in illustration Slide Shroud Cover over Gas Line, then over Platform/Leg assembly until bottom of Shroud rests on Base Step 5 – Attach Engine to Post Lay Engine Assembly on its side, using carton for support . Remove and save Control Knob . Remove and save Engine Access Panel by removing ( ) black Thumbscrew from bottom of Access Door . Disconnect wire from Igniter by gently pulling wire from back of box . Align (4) holes in top of Post with (4) holes in bottom of Engine . Note: One hole is at a different level than the rest Make sure th...