Assessments - 2, GPA: 4.5
(
)
)
|
Facilidade de uso
Review previous steps to make any necessary adjustments. 5. Log placement is completed. Attention: Do not use Figure 1 to order replacement logs. Refer to Page 8, Parts List and Parts View to order logs for your appropriate model number. Apply loose material (glowing embers) per appropriate Installation Instructions and Owner's Manual. Replacement of loose material (glowing embers) must be purchased from Empire Comfort Systems, Inc. Application of excess loose material (glowing embers) may adversely affect performance of the heater. WARNING: All previously applied loose material must be removed prior to reapplication. Replacement Loose Material (glowing embers) Part Number LS-18H 15999 LS-24H 15970 LS-30H 15970 Platinum Bright Embers PE-20-1 Note: A single layer of embers is to be used when applying Platinum Bright Embers (alone or in combination with production embers) to the burner. Before you begin: Do not, handle these logs with your bare hands! Always wear gloves to prevent skin irritation. After handling logs, wash your hands gently with soap and water. All Logs The positioning of the logs is critical to the safe and clean operation of this heater. Sooting and other problems may result if the logs are not properly and firmly positioned in the appliance. Refer to Figure 1 for the following warning. Warning: Failure to position the parts in accordance with this diagram or failure to use only parts specifically approved with this appliance may result in property damage or personal injury. Log Placement LS-(18, 24, 30)H Logs Figure 1 The following WARNING applies when log set is installed onto an unvented gas burner assembly. WARNING: This appliance is equipped for (natural or propane) gas. Field conversion is not permitted. 1 3 2 LOG PLACEMENT EMBER PLACEMENT LS-18H-1 PHOTOS Do not cover any large rear ports withloose material (glowing embers) Photo 1 Photo2 Do not cover any large front ports withloose material (glowing embers) Photo3Photo4 20173-1-0506 Page 5 EMBER PLACEMENT LS-24H-1 PHOTOS Do not cover any large rear ports withPhoto 2 loose material (glowing embers) Photo 1 Do not cover any large front ports withloose material (glowing embers) Photo4 Photo3 Page 6 20173-1-0506 EMBER PLACEMENT LS-30H-1 PHOTOS Do not cover any large rear ports with loose material (glowing embers) Photo 1 Photo2 Do not cover any large front ports withloose material (glowing embers) Photo3Photo4 20173-1-0506 Page 7 PARTS LIST AND PARTS VIEW Attention: When ordering parts, it is very important that part number and description of part coincide. Index No. Part Number Description DEEP WOODS OAK LOG SETS 1 R-8319 FRONT LOG - 18" 1 R-8323 FRONT LOG - 24" 1 R-8326 FRONT LOG - 30" 2 R-8320 REAR LOG - 18" 2 R-8324 REAR LOG - 24" 2 R-8327 REAR LOG - 30" 3 R-8321 TOP LOG - 18" 3 R-8325 TOP LOG - 24" 3 R-8328 TOP LOG - 30" 2 13 USE ONLY MANUFACTURER'S REPLACEMENT PARTS. USE OF ANY OTHER PARTS COULD CAUSE INJURY OR DEATH. HOW TO ORDER REPAIR PARTS Parts can be ordered only t...
Este manual também é adequado para os modelos :Eléctrico - LS-18H-1 (3.49 mb)
Eléctrico - LS-18H-1 (3.49 mb)
Eléctrico - LS-24H-1 (3.49 mb)
Eléctrico - LS-30H-1 (3.49 mb)