Assessments - 7, GPA: 4
(
)
)
|
Fotos e especificações Scarlett SC-1158 |
Facilidade de uso
Repair of the device only by qualified persons. • Close supervision is required when appliance is used near children. • Always remove the plug from the power supply before cleaning. • Unplug oil heater by grasping plug and pulling it from the power supply. Pull on the plug, not on the cord. • Do not use out of the room. • Do not insert and pull out the plug with wet hand, as this may cause electrical shock. • The oil heater must be used only in the upright position. • The unit should be far away from the object flammable or easy deformated objects during uses. • Surface temperature of the appliance is high, thus do not touch it, except the handle. CAUTION: • Do not cover the appliance when is use. • Do not operate without castors attached. 2 ASSEMBLING • First put the unit upside down. • Install multidirectional rolling wheels to each end between the first and the second groups of the radiating flanges. • Let the “U” shape screw surrounding the dome of the radiating flanges. Then insert it into two holes of the supporting plate. • Insert the butterfly nuts and screw them tightly counter clockwise. USING THE APPLIANCE • Set the thermostat to the minimal position and power switch knob to the “0” position, insert the plug to the power supply. POWER SWITCH KNOB • You can adjust power of work of an oil heater, using power switch knob: - O - Off; - “1“ - minimal power (800 W); - “II” - medium power (1200 W); - “III” - maximal power (2000 W). THERMOSTAT • Set the power switch knob to “III” position thus the pilot light should light up. • Set the thermostat to the maximum position. • When the temperature rises to which you are satisfied with, slowly turn the thermostat counterclockwise until the pilot light is out, and the room temperature thus can keep constant. • If you want to change the room temperature, you can make another regulation: turn the thermostat clockwise to rise the temperature and counterclockwise to lower it, or turn the power switch knob to the “I” or “II” position. • The pilot light will be on only if the temperature is below the setting value of the thermostat. NOTES: • The room must be sealed in good condition, if not, it will not make good result because of the influx of heat. • After use, turn the power switch knob to the “O” position and turn the thermostat to the minimal position and unplug from power supply. MODEL POWER REGULATION RANGE (W) SUITABLE FOR AREA (m2) SC-1158 800/1200/2000 18 3 TIMER OPERATION • The timer face consists of two numbered bands. • To use the heater continuously rotate the timer dial until the pointer is opposite. • Check the adapt band to adjust your. • To use the timer rotate the timer dial to the time you expect to cut off. At the time the heater will be cut off. • For example: suppose the power frequency is 50 hz. Rotate the timer dial until the pointer is opposite ‘4’ of the outer band. The heater will be cut off after four. CLEAN AND CARE • The oil heater should be cleaned regularly to wipe out the dust on the surface of fins. As this may result the radiating efficient. • Unplug from the power supply and allow the appliance to cool down. • Wipe out with a soft damp cloth. Do not use detergent or abrasives. • Do not scrap the surfaces of fins with sharp hard tools, to avoid surfaces getting rusty, because of damage of the paint coat. STORAGE • Ensure the oil heater is completely cool. • Store the appliance in a cool, dry place. SPECIFICATION Power supply 230 V, 50 Hz Power 2000 W Net/ Gross weight 12.0 kg/13.40 kg Radiating fins quantity 9 Gift box dimension (L x W x H) 465 mm x 145 mm x 693 mm 4 ОПИСАНИЕ_ 1. Контрольная панель 2. Термостат 3. Переключатель мощности 4. Устройство для хранения электрошнура 5. Сетевой шнур 6. Колесо 7. Нагревательные элементы 8. Передняя панель 9. Таймер МЕРЫ БЕЗОПАСНОСТИ_ При эксплуатации прибора соблюдайте следующие меры предосторожности: • Внимательно прочитайте руководство по эксплуатации. • Использовать только в бытовых целях. Прибор не предназначен для промышленного использования. • Перед первым использованием прибора проверьте, соответствует ли электропитание Вашего масляного радиатора, указанное в таблице с техническими характеристиками, электропитанию в Вашей сети. • Опасность удара электрическим током существует даже при выключенном приборе. Всегда отключайте прибор от сети питания после эксплуатации. • Не допускайте попадания воды на корпус масляного радиатора, а также не используйте прибор в помещениях с п...