Log:
Assessments - 4, GPA: 3.8 ( )

Instruções de Operação Gas-Fired Products, Modelo 125-RN

Fabricante : Gas-Fired Products
Arquivo Tamanho: 179.14 kb
Arquivo Nome : spc125rnman.pdf
Língua de Ensino: en
Ir para baixar



Facilidade de uso


Do not allow anyone who has not read these instructions to assemble, light, adjust or operate the heater. CYLINDER NOT INCLUDED GAS-FIRED INFRA-RED PORTABLE CONSTRUCTION HEATER DO NOT LEAVE HEATER UNATTENDED OR IN OPERATION WHILE SLEEPING GENERAL HAZARD WARNING: FAILURE TO COMPLY WITH THE PRECAUTIONS AND INSTRUCTIONS PROVIDED WITH THIS HEATER CAN RESULT IN DEATH, SERIOUS BODILY INJURYAND PROPERTY LOSS OR DAMAGE FROM HAZARDS OF FIRE, EXPLOSION, BURN, ASPHYXIATION, CARBON MONOXIDE POISONING, AND/ORELECTRICAL SHOCK. ONLY PERSONS WHO CAN UNDERSTAND AND FOLLOW THE INSTRUCTIONS SHOULD USE OR SERVICE THIS HEATER. IF YOU NEED ASSISTANCE OR HEATER INFORMATION SUCH AS INSTRUCTION MANUALS, LABELS, ETC., CONTACT THE MANUFACTURER. WARNING: FIRE, BURN, INHALATION AND EXPLOSION HAZARD. KEEP SOLID COMBUSTIBLES SUCH AS BUILDING MATERIALS, PAPER OR CARDBOARD ASAFE DISTANCE AWAYFROM THE HEATER AS RECOMMENDED BYTHE INSTRUCTIONS. NEVER USE THE HEATER IN SPACES WHICH DO OR MAY CONTAIN VOLATILE OR AIRBORNE COMBUSTIBLES OR PRODUCTS SUCH AS GASOLINE, SOLVENTS, PAINTTHINNER, DUST PARTICLES OR UNKNOWN CHEMICALS. WARNING: NOT FOR HOME OR RECREATIONAL VEHICLE USE 04/03 Revision L1 #18666 SPECIFICATIONS SPECIFICATIONS N GAS TYPE ................................ LP-Gas ...... Natual Gas MAX. INLET PRESSURE. ... 14 IN. W.C. ..... 14 IN. W.C. MIN. INLET PRESSURE .. 13.5 IN. W.C. ....... 7 IN. W.C. MANIFOLD PRESSURE .. 12.5 IN. W.C. ........ 6 IN.W.C. WARNING DO NOT EXCEED . psi (14” w.c.) GAS PRESSURE TOTHE GAS CONTROL VALVE. VENTILATION WARNING THIS APPLIANCE IS UNVENTED AND MUST BE USED ONLY IN A WELL VENTILATED AREA. The flow of combustion and ventilation air must not be obstructed. DO NOT use in a tightly enclosed area. Any combustion process requires and consumes oxygen, and may produce carbon monoxide. This heater must be operated with adequate ventilation. Two openings directly to the outdoors must be provided, one low and one high, preferably on opposite sides of the area to be heated. Each of these openings must provide at least three square inches of combustion air-intake area and exhaust outlet area for every 1000 BTUs per hour of heater input rate in order to complete the combustion/ventilation process. Provide additional ventilation for any additional fuel- burning appliances and/or additional occupants. CLEARANCE (Minimum clearances to combustible materials) Do not exceed the gas supply pressures shown on rating plates. The maximum inlet gas supply pressures and minimum inlet supply pressures (for purposes of input adjustment) for LP-Gas and Natural gas are shown as follows: MODEL NO. BTU/HR RATING TYPE GAS NORMAL OPERATING POSTION CLEARANCES TO COMBUSTIBLES NATURAL LP-GAS TOP SIDES BACK 125-R 125,000* VERTICAL 48” 60” 60” 125RN 125,000 VERTICAL 48” 60” 60” *Tank size and tank temperature can directly affect BTU output CONTENTS Installation Instructions .................................................. 3 Location ....................................................................... 3 Piping .......................................................................... 3 Odor Fading Warning................................................4 Operating Instructions .................................................. 5 Lighting and Shut Down ............................................... 5 Maintenance Instructions ............................................. 6 Replacement Parts List ............................................... 7 Service and Parts Ordering Information ........................ 9 FOR YOUR SAFETY Do not use this heater in a space where gasoline or other liquids having flammable vapors are stored or used. The heater is designed and approved for use as a construction heater under ANSI Z83.7 / CGA 2.14 - 2000 We cannot anticipate every use which may be made of our heaters. CHECK WITH YOUR LOCAL FIRE SAFETYAUTHORITY IF YOU HAVE QUESTIONS ABOUTAPPLICATIONS. Other standards govern the use of fuel gases and heat producing products in specific applications. Your local authority can advise you about these. This appliance is intended to be used primarily for the heating of buildings under construction, alteration or repair. 2 THE STATE OF CALIFORNIA REQUIRES THE FOLLOWING WARNING: WARNING Combustion by-products produced when using this product contain carbon monoxide, a chemical known to the State of California to cause cancer and birth defects (or other reproductive harm). Operating Instructions and Owner’s Manual INSTALLATION INSTRUCTIONS GENERAL: INSTALLATION INSTRUCTIONS GENERAL: DO NOT attempt to operate the heater with any gas other than that indicated on the heater nameplate. For the U.S. and/or Canada, the installation of this appliance must comply with local and/or Provincial codes or, in the absence of these codes, • With the (U.S.) National Fuel Gas Code, ANSI Z223.1 – Latest Edition (for Natural and LP-Gas operation, Models 125-RN, 125-R), and with the (U.S) Standard for the Storage and Handling of Liquefied Petro...

Este manual também é adequado para os modelos :
Eléctrico - 125-R (179.14 kb)

Escreva a sua própria avaliação do dispositivo



Mensagem
Seu nome :
Introduza os dois dígitos :
capcha





categorias