• Do not operate any heater with a damaged cord or plug, or if heater has been dropped or damaged in any manner. Return heater to your nearest service centre for examination, electrical or mechanical adjustment or repair. • Do not use outdoors. • This heater is not intended for use in wet or moist locations such as bathrooms or laundry areas. DO NOT IMMERSE or allow liquids to be spilt on heater. • Place unit well clear of heat sensitive surfaces and where necessary place on a suitable stable in

We ask that any electrical appliance that you use be operated in a sensible fashion with due care and attention placed on the following important operating instructions. Important Safeguards For Your Kambrook Convection Panel Heater • Carefully read all instructions before operating the Convection Panel Heater and save for future reference. • Remove any packaging material and promotional stickers before using the Convection Panel Heater for the first time. • Connect only to 230V or 240V power ou

3. This heater has three heat control settings OFF, ”LOW” HEAT AND “HIGH” HEAT, located at the top of the unit, along with an adjustable thermostat control. “LOW” HEAT (750W) is the lowest heat setting and “HIGH” HEAT (1500W) is the highest. 4. To select these settings DO NOT twist or rotate the heat control and thermostat control located on the top of the heater. To turn the heater on, grip the heat setting knob and lightly pull all the way up to the “HIGH” setting. There will be an audible cli

In Australia, this KAMBROOK Guarantee is additional to the conditions and guarantees which are mandatory as implied by the Trade Practices Act 1974 and State and Territory legislation. For service, spare parts or product information in Australia, please call KAMBROOK on the Customer Service Line 1300 139 798. For service, spare parts or product information in New Zealand, please call KAMBROOK New Zealand, Private Bag 94411, Greenmount, Auckland Phone 0800 273 845 Fax 0800 288 513. For spare part

Heater elements 2. Safety grill 3. Carry Handles 4. Control dial 5. Tip over switch BEFORE USING YOUR RADIANT HEATER, PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE. 1 IMPORTANT SAFEGUARDS When using electrical appliances, basic precautions should always be followed, including the following: • To prevent a possible fire, allow ample space around the heater (at least 1.7m at front and 0.5m at the rear, top and • Keep combustible materials such as curtains/drapes and othe

Regularly inspect the supply cord, plug, control settings, air inlets and outlets and main housing for any damage. If found damaged in any way, immediately cease use of the heater and return to Kambrook or an authorised service agent for inspection or repair. The installation of a residual current device (safety switch) is recommended to provide additional safety protection when using electrical appliances. It is advisable that a safety switch with a rated residual operating current not exceedin

• Do not touch hot metal surfaces. • Do not allow power cord to contact hot metal surfaces. • Set the control setting to the OFF position then Unplug and allow heater to cool down before cleaning or storing. • The heater will not operate unless it is placed on a flat level surface as it is fitted with a tilt switch. • Do not use the heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists if the heater is covered or positioned incorr

3 convenient heat settings 3. Neon power indicator light 4. On-off switch with light indicator 5. Cool touch recessed carry handles 6. Safety tip-over cut-out switch 7. High efficiency quartz elements BEFORE USING YOUR LOW RADIANT HEATER, PLEASE READ THESE INSTRUCTIONS CAREFULLY AND RETAIN FOR FUTURE REFERENCE. 2 IMPORTANT PRECAUTIONS When using electrical appliances, basic precautions should always be followed, including the following: 1. Keep combustible materials such as drapes and other furn

Convenient carry handles 4. High efficiency quartz element 2. Two heat settings and adjustable 5. Large castors thermostat 6. Neon ‘power on’ indicator light 3. Convenient cord storage 2 IMPORTANT PRECAUTIONS When using electrical appliances, basic precautions should always be followed, including the following: READ AND KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE BEFORE USING THIS HEATER. Keep combustible materials such as drapes and other furnishing away from heater. The heater must NOT be loc

NOTE: After several seconds, the LCD screen will fade, but the heater settings will remain visible. Use the MODE button to select the desired heat setting. The mode button allows you to scroll through the various heating modes. HIGH – High heat setting (1800 watts) LOW – Low heat setting (1100 watts) AUTO – for use with the electronic thermostat FAN – for fan only operation To switch the heater into standby mode, press and hold the POWER/ SWING button until a beep sound is heard. Turn the heater